Development and implementation of a beam theory model for shape memory polymers

Abstract In this paper we focus on the development of a beam theory for a small strain continuum model of thermoviscoelastic shape memory polymers (SMP). Rather than a history integral model that is common for viscoelastic materials, a thermodynamically based state evolution model developed by Ghosh and Srinivasa (2011a) is used as the basis for the beam model based on the Euler–Bernoulli beam theory. An example of a three-point bend test is simulated using the beam theory model. The numerical solution is implemented by using an operator split technique that utilizes an elastic predictor and dissipative corrector. The key idea is that the elastic predictor is based on the solution to a beam theory boundary value problem while the dissipative corrector is entirely local (and hence can be parallelized) and is applied by considering the beam as a two or three dimensional body. This enables a very rapid solution of the problem yet maintaining fidelity of the distribution of inelastic strains across the cross-section. A displacement based convergence criterion is used in each time step. This algorithm is validated by using a three-point bending experiment for three different material cases: elastic, plastic and thermoplastic response. Time step convergence and mesh density convergence studies are carried out for the thermoviscoelastic FEM model. Finally, we implement and study this model for a SMP beam undergoing three-point bending strain recovery and stress recovery thermomechanical loading.

[1]  J. Reddy.  An introduction to the finite element method , 1989 .

[2]  Markus Böl,et al.  Finite element-based multi-phase modelling of shape memory polymer stents , 2010 .

[3]  Hisaaki Tobushi,et al.  Shape recovery and irrecoverable strain control in polyurethane shape-memory polymer , 2008, Science and technology of advanced materials.

[4]  Thao D. Nguyen,et al.  Influence of thermoviscoelastic properties and loading conditions on the recovery performance of shape memory polymers , 2011 .

[5]  Yiping Liu,et al.  Thermomechanics of shape memory polymers: Uniaxial experiments and constitutive modeling , 2006 .

[6]  Ralph C. Smith,et al.  Model development for shape memory polymers , 2008, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[7]  Thao D. Nguyen,et al.  A thermoviscoelastic model for amorphous shape memory polymers: Incorporating structural and stress relaxation , 2008 .

[8]  J. Reddy.  An introduction to nonlinear finite element analysis , 2004 .

[9]  Arun R. Srinivasa,et al.  A Two-network thermomechanical model of a shape memory polymer , 2011 .

[10]  Reza Naghdabadi,et al.  A constitutive model for shape memory polymers with application to torsion of prismatic bars , 2012 .

[11]  Thao D. Nguyen,et al.  Finite deformation thermo-mechanical behavior of thermally induced shape memory polymers , 2008 .

[12]  Pierre Gilormini,et al.  Predicting thermal shape memory of crosslinked polymer networks from linear viscoelasticity , 2012 .

[13]  Lallit Anand,et al.  Thermally actuated shape-memory polymers: Experiments, theory, and numerical simulations , 2010 .

[14]  Jinlian Hu.  Shape Memory Polymers and Textiles , 2007 .

[15]  Yiping Liu,et al.  Thermomechanical recovery couplings of shape memory polymers in flexure , 2003 .