Increasing the Robustness of Large Electric Driven Compressor Systems During Voltage Dips

Grid voltage disturbances pose serious problems to gas compression stations powered by drives such as load commutated inverters (LCI). Until recently, drive control systems used in industrial practice were not capable of handling reduced grid voltage situations appropriately, and instead interrupted the supply of drive torque. Without drive torque, compressors may quickly enter surge conditions, under which the gas flows rapidly back and forth, causing wear and risking damage to the equipment. In this paper, experimental evidence is provided showing that a combination of a revised control scheme for LCIs based on model predictive control and an advanced protection scheme for compressors, the so-called dynamic time to surge improves robustness of the system during voltage dips. We share successful voltage dip ride-throughs of two 41.2 MW LCI-fed synchronous machines, each powering a gas compressor at a large industrial site in Norway. We further analyze the impact of partial torque during voltage dips on the availability and safety of the gas compression station.

[1]  M. Diehl,et al.  Real-time optimization and nonlinear model predictive control of processes governed by differential-algebraic equations , 2000 .

[2]  K. Pietiläinen Voltage sag ride-through of AC drives : control and analysis , 2005 .

[3]  Math Bollen,et al.  The influence of motor re-acceleration on voltage sags , 1994, Proceedings of 1994 IEEE Industry Applications Society Annual Meeting.

[4]  Daniel Lewandowski,et al.  Experimental evaluation of MPC-based anti-surge and process control for electric driven centrifugal gas compressors , 2015 .

[5]  Moritz Diehl,et al.  An auto-generated real-time iteration algorithm for nonlinear MPC in the microsecond range , 2011, Autom..

[6]  Thomas Besselmann,et al.  Partial torque ride through with model predictive control , 2016, 2016 Petroleum and Chemical Industry Conference Europe (PCIC Europe).

[7]  Pieder Jorg,et al.  Power loss ride-through in a variable speed drive system , 2014, 2014 Petroleum and Chemical Industry Conference Europe.

[8]  Thomas Besselmann,et al.  Model Predictive Anti-Surge Control of Centrifugal Compressors with Variable-Speed Drives , 2012 .

[9]  Daniel Lewandowski,et al.  Safe and efficient operation of centrifugal compressors using linearized MPC , 2014, 53rd IEEE Conference on Decision and Control.

[10]  Christian Kirches,et al.  qpOASES: a parametric active-set algorithm for quadratic programming , 2014, Mathematical Programming Computation.

[11]  Jan Tommy Gravdahl,et al.  Compressor Surge and Rotating Stall: Modeling and Control , 1998 .

[12]  Hans Joachim Ferreau,et al.  Model Predictive Control of Load-Commutated Inverter-Fed Synchronous Machines , 2016, IEEE Transactions on Power Electronics.

[13]  Edith Clarke,et al.  Determination of Instantaneous Currents and Voltages by Means of Alpha, Beta, and Zero Components , 1951, Transactions of the American Institute of Electrical Engineers.

[14]  Erling Lunde,et al.  Dynamic Time to Surge Computation for Electric Driven Gas Compressors during Voltage Dips , 2016 .

[15]  Thomas Besselmann,et al.  Nonlinear model predictive torque control of a load commutated inverter and synchronous machine , 2014, 2014 International Power Electronics Conference (IPEC-Hiroshima 2014 - ECCE ASIA).

[16]  Stefan Almér,et al.  Model Predictive Control in the Multi-Megawatt Range , 2016, IEEE Transactions on Industrial Electronics.

[17]  Eduardo P. Wiechmann,et al.  On the Efficiency of Voltage Source and Current Source Inverters for High-Power Drives , 2008, IEEE Transactions on Industrial Electronics.

[18]  Ying Wang,et al.  Single-Event Characteristics for Voltage Dips in Three-Phase Systems , 2017, IEEE Transactions on Power Delivery.