Exhaust energy recovery for control of a homogenous charge compression ignition engine

This work investigates a purely thermal control system for HCCI engines, where thermal energy from exhaust gas recirculation (EGR) and compression work in the supercharger are either recycled or rejected as needed. HCCI engine operation is analyzed with a detailed chemical kinetics code, HCT (Hydrodynamics, Chemistry and Transport), which has been extensively modified for application to engines. HCT is linked to an optimizer that determines the operating conditions that result in maximum brake thermal efficiency, while meeting the restrictions of low NOx and peak cylinder pressure. The results show the values of the operating conditions that yield optimum efficiency as a function of torque for a constant engine speed (1800 rpm). For zero torque (idle), the optimizer determines operating conditions that result in minimum fuel consumption. The optimizer is also used for determining the maximum torque that can be obtained within the operating restrictions of NOx and peak cylinder pressure. The results show that a thermally controlled HCCI engine can successfully operate over a wide range of conditions at high efficiency and low emissions.

[1]  Scott W. Haney,et al.  Optimization of a CNG series hybrid concept vehicle , 1996 .

[2]  Scott W. Haney,et al.  A “SuperCode” for Systems Analysis of Tokamak Experiments and Reactors , 1992 .

[3]  Salvador M. Aceves,et al.  Compression Ratio Effect on Methane HCCI Combustion , 1998 .

[4]  C. Westbrook,et al.  Autoignition Chemistry of C4 Olefins Under Motored Engine Conditions: A Comparison of Experimental and Modeling Results , 1991 .

[5]  Salvador M. Aceves,et al.  A Desiccant Dehumidifier for Electric Vehicle Heating , 1996 .

[6]  Jürgen Warnatz,et al.  A detailed chemical kinetic reaction mechanism for the oxidation of iso-octane and n-heptane over an extended temperature range and its application to analysis of engine knock , 1989 .

[7]  John D Galambos,et al.  Commercial tokamak reactor potential with advanced tokamak operation , 1995 .

[8]  Fabian Mauss,et al.  Supercharged Homogeneous Charge Compression Ignition , 1998 .

[9]  P. Gaffuri,et al.  Autoignition Chemistry of the Hexane Isomers : An Experimental nd Kinetic Modeling Sudy , 2007 .

[10]  D. Foster,et al.  Compression-Ignited Homogeneous Charge Combustion , 1983 .

[11]  Robert W. Dibble,et al.  Sensitivity of Natural Gas HCCI Combustion to Fuel and Operating Parameters Using Detailed Kinetic Modeling , 1999, Advanced Energy Systems.

[12]  John B. Heywood,et al.  Internal combustion engine fundamentals , 1988 .

[13]  Yukiyasu Tanaka,et al.  A Study on Gasoline Engine Combustion by Observation of Intermediate Reactive Products during Combustion , 1979 .

[14]  Robert J. Kee,et al.  CHEMKIN-III: A FORTRAN chemical kinetics package for the analysis of gas-phase chemical and plasma kinetics , 1996 .

[15]  C. M. Lund,et al.  HCT : a general computer program for calculating time-dependent phenomena involving one-demensional hydrodynamics, transport, and detailed chemical kinetics , 1978 .

[16]  S. H. Jo,et al.  Active Thermo-Atmosphere Combustion (ATAC) - A New Combustion Process for Internal Combustion Engines , 1979 .

[17]  A. London,et al.  Compact heat exchangers , 1960 .

[18]  William J. Pitz,et al.  The Autoignition Chemistry of Paraffinic Fuels and Pro-Knock and Anti-Knock Additives: A Detailed Chemical Kinetic Study , 1991 .

[19]  Hajime Ishii,et al.  Exhaust Purification of Diesel Engines by Homogeneous Charge with Compression Ignition Part 1: Experimental Investigation of Combustion and Exhaust Emission Behavior Under Pre-Mixed Homogeneous Charge Compression Ignition Method , 1997 .

[20]  David Gordon Wilson,et al.  The design of high-efficiency turbomachinery and gas turbines , 1984 .

[21]  G. Woschni A Universally Applicable Equation for the Instantaneous Heat Transfer Coefficient in the Internal Combustion Engine , 1967 .

[22]  John B. Heywood,et al.  Development and Evaluation of a Friction Model for Spark-Ignition Engines , 1989 .