Fabrication of titania coatings on stainless steel via laser-induced deposition of colloidal titanium oxide from sol–gel suspension
暂无分享,去创建一个
F. Nabhani | S. Hodgson | Y. Adraider | Y. Pang | M. Sharp | A. Alwaidh
[1] F. Nabhani,et al. Structure characterisation and mechanical properties of crystalline alumina coatings on stainless steel fabricated via sol–gel technology and fibre laser processing , 2012 .
[2] W. L. Vasconcelos,et al. Processing and characterization of sol–gel titania membranes , 2012 .
[3] L. Hupa,et al. Comparison of self-cleaning properties of three titania coatings on float glass , 2011 .
[4] D. Králová,et al. Photoactivity of brookite–rutile TiO2 nanocrystalline mixtures obtained by heat treatment of hydrothermally prepared brookite , 2011 .
[5] K. Venkatakrishnan,et al. Synthesis of bio-functionalized three-dimensional titania nanofibrous structures using femtosecond laser ablation. , 2011, Acta biomaterialia.
[6] Y. R. Smith,et al. Sulfated Fe2O3–TiO2 synthesized from ilmenite ore: A visible light active photocatalyst , 2010 .
[7] Feixiang Wu,et al. Preparation of synthetic rutile and metal-doped LiFePO4 from ilmenite , 2010 .
[8] A. Khaleel. Sol–gel synthesis, characterization, and catalytic activity of Fe(III) titanates , 2009 .
[9] Zhu Liu,et al. Formation of ultraviolet laser-annealed mesoporous anatase films by a sol–gel process , 2009 .
[10] P. Limthongkul,et al. TiO2 optical coating layers for self-cleaning applications , 2008 .
[11] K. Starbova,et al. Excimer laser processing as a tool for photocatalytic design of sol–gel TiO2 thin films , 2008 .
[12] Yuhan Sun,et al. Low-temperature deposition of the high-performance anatase-titania optical films via a modified sol–gel route , 2008 .
[13] M. Ghoranneviss,et al. Influence of annealing temperature on the nanostructure and corrosivity of Ti/stainless steel substrates , 2008 .
[14] J. Perrière,et al. Epitaxial growth of titanium oxide thin films on c-cut and α-cut sapphire substrates , 2007 .
[15] B. Atakan,et al. Organometallic vapour deposition of crystalline aluminium oxide films on stainless steel substrates , 2007 .
[16] I. Piwoński,et al. Vapor phase modification of sol–gel derived titania (TiO2) surfaces , 2006 .
[17] M. Toparli,et al. Preparation and characterization of Fe2O3–TiO2 thin films on glass substrate for photocatalytic applications , 2006 .
[18] T. Troczynski,et al. A resistive gas sensor based on undoped p-type anatase , 2005 .
[19] Yong Sun,et al. Effect of thermal oxidation conditions on tribological behaviour of titanium films on 316L stainless steel , 2005 .
[20] T. Peltola,et al. TF-XRD examination of surface-reactive TiO2 coatings produced by heat treatment and CO2 laser treatment. , 2005, Biomaterials.
[21] J. Laureyns,et al. Microstructural transformations of TiO2, Al2O3+13TiO2 and Al2O3+40TiO2 at plasma spraying and laser engraving , 2004 .
[22] I. Parkin,et al. Characterisation of the photocatalyst Pilkington Activ (TM): a reference film photocatalyst? , 2003 .
[23] E. Andrade,et al. Spray pyrolysis deposition and characterization of titanium oxide thin films , 2003 .
[24] J. Chen,et al. Influence of oxygen pressure on the properties and biocompatibility of titanium oxide fabricated by metal plasma ion implantation and deposition , 2002 .
[25] M. Camacho-López,et al. Raman studies on laser induced crystallization of Co(II) doped titania; effect of the dopant concentration , 2002 .
[26] M. Langlet,et al. The sol-gel transformation of TIPT coatings : a FTIR study , 1999 .
[27] J. M. Martínez-Duart,et al. Mechanical and in vitro testing of aerosol-gel deposited titania coatings for biocompatible applications. , 2002, Biomaterials.