Measuring delamination in carbon/epoxy composites using a shadow moiré laser based imaging technique
暂无分享,去创建一个
[1] D. C. H. Yang,et al. Effects of Feedrate and Chisel Edge on Delamination in Composites Drilling , 1993 .
[2] Hong Hocheng,et al. Delamination During Drilling in Composite Laminates , 1990 .
[3] V. Tagliaferri,et al. Effect of drilling parameters on the finish and mechanical properties of GFRP composites , 1990 .
[4] G. T. Reid,et al. Interferogram Analysis: Digital Fringe Pattern Measurement Techniques , 1994 .
[5] Usama A. Khashaba. Delamination in drilling GFR-thermoset composites , 2004 .
[6] K. Lee,et al. Critical thrust force at propagation of delamination zone due to drilling of FRP/metallic strips , 2005 .
[7] T. Kreis. Holographic Interferometry: Principles and Methods , 1996 .
[8] Pedro Reis,et al. Study of delamination in drilling carbon fiber reinforced plastics (CFRP) using design experiments , 2003 .
[9] Hong Hocheng,et al. Taguchi analysis of delamination associated with various drill bits in drilling of composite material , 2004 .
[10] K. Krishnamurthy,et al. A neural network thrust force controller to minimize delamination during drilling of graphite-epoxy laminates , 1996 .
[11] Jin Pyo Jung,et al. Critical thrust force at delamination propagation during drilling of angle-ply laminates , 2005 .
[12] Wen-Chou Chen,et al. Some experimental investigations in the drilling of carbon fiber-reinforced plastic (CFRP) composite laminates , 1997 .
[13] Dai Gil Lee,et al. Delamination-Free and High Efficiency Drilling of Carbon Fiber Reinforced Plastics , 1995 .
[14] D. C. H. Yang,et al. Delamination-Free Drilling of Composite Laminates , 1994 .
[15] R. DeVor,et al. A Mechanistic Approach to Predicting the Cutting Forces in Drilling: With Application to Fiber-Reinforced Composite Materials , 1993 .
[16] E. Capello. Workpiece damping and its effect on delamination damage in drilling thin composite laminates , 2004 .
[17] Katherine Creath,et al. Phase-Shifting Holographic Interferometry , 1994 .
[18] Gary Cloud,et al. Optical Methods of Engineering Analysis , 1996 .
[19] Hong Hocheng,et al. Effect of eccentricity of twist drill and candle stick drill on delamination in drilling composite materials , 2005 .
[20] V. Tagliaferri,et al. Damage development in drilling glass fibre reinforced plastics , 1995 .
[21] J. Paulo Davim,et al. Drilling fiber reinforced plastics (FRPs) manufactured by hand lay-up: influence of matrix (Viapal VUP 9731 and ATLAC 382-05) , 2004 .