Optimal Design of C-type Passive Filters Based on Response Surface Methodology for Typical Industrial Power Systems

Abstract In this article, a response surface methodology based approach is proposed for the optimal design of C-type passive filters that can be employed in typical industrial power systems. The purpose of the optimization process is to minimize voltage and current total harmonic distortions. According to IEEE Standard 519-1992, both indices and displacement power factor are handled as constraints for the optimal filter design problem. To show the validity of the proposed approach, numerical results are presented.

[1]  Orhan Ekren,et al.  Size optimization of a PV/wind hybrid energy conversion system with battery storage using response surface methodology , 2008 .

[2]  Pat Bodger,et al.  Controlling harmonic instability of HDVC links connected to weak AC systems , 1990 .

[3]  G.W. Chang,et al.  A Probabilistic Approach for Optimal Passive Harmonic Filter Planning , 2007, IEEE Transactions on Power Delivery.

[4]  Ward Jewell,et al.  Effects of harmonics on equipment , 1993 .

[5]  M. M. ABDEL AZIZ,et al.  LC Compensation for Nonlinear Loads Taking Into Account Cost Constraints , 2005 .

[6]  Anthoula Menti,et al.  Optimal sizing and limitations of passive filters in the presence of background harmonic distortion , 2009 .

[7]  F. Peng.  Harmonic sources and filtering approaches , 2001 .

[8]  Aslan Deniz Karaoglan,et al.  Optimization of PI parameters for DSP-based permanent magnet brushless motor drive using response surface methodology , 2012 .

[9]  Ali Dastfan,et al.  Multi-objective optimum design of passive filters using SPEA and NSGA-II algorithms , 2009 .

[10]  M. Joorabian,et al.  C-type filter design based on power-factor correction for 12-pulse HVDC converters , 2008, 2008 34th Annual Conference of IEEE Industrial Electronics.

[11]  Xu Dianguo,et al.  Study on optimal design method for passive power filters set at high voltage bus considering many practical aspects , 2008, 2008 Twenty-Third Annual IEEE Applied Power Electronics Conference and Exposition.

[12]  Qiongq Chen,et al.  The application and optimization of C-type filter in a combined harmonic power filter , 2004, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551).

[13]  G.W. Chang,et al.  Passive Harmonic Filter Planning in a Power System With Considering Probabilistic Constraints , 2009, IEEE Transactions on Power Delivery.

[14]  H. V. Nguyen,et al.  C filters for wide-bandwith harmonic attenuation with low losses , 2000, 2000 IEEE Power Engineering Society Winter Meeting. Conference Proceedings (Cat. No.00CH37077).

[15]  Margaret J. Robertson,et al.  Design and Analysis of Experiments , 2006, Handbook of statistics.

[16]  A.F. Zobaa.  The optimal passive filters to minimize voltage harmonic distortion at a load bus , 2005, IEEE Transactions on Power Delivery.

[17]  P. Gill,et al.  Chapter III Constrained nonlinear programming , 1989 .

[18]  P. Gnacinski.  Prediction of windings temperature rise in induction motors supplied with distorted voltage , 2008 .

[19]  Tamara G. Kolda,et al.  Optimization by Direct Search: New Perspectives on Some Classical and Modern Methods , 2003, SIAM Rev..

[20]  Hatem H. Zeineldin,et al.  Power Factor Correction Based on Transmission Loss Minimization with Uncertain Source Harmonics and Load Characteristics , 2009 .

[21]  A. Tits,et al.  User's Guide for FSQP Version 2.0 A Fortran Code for Solving Optimization Problems, Possibly Minimax, with General Inequality Constraints and Linear Equality Constraints, Generating Feasible Iterates , 1990 .

[22]  Anthoula Menti,et al.  Genetic algorithm-based optimal design of shunt compensators in the presence of harmonics , 2008 .

[23]  Hirofumi Akagi,et al.  Instantaneous power theory and applications to power conditioning , 2007 .

[24]  Hatem H. Zeineldin,et al.  Particle Swarm Optimization of Passive Filters for Industrial Plants in Distribution Networks , 2011 .

[25]  Wilsun Xu,et al.  An Investigation on the Selection of Filter Topologies for Passive Filter Applications , 2009, IEEE Transactions on Power Delivery.

[26]  Ahmed Faheem Zobaa,et al.  Optimal $C$-Type Passive Filter Based on Minimization of the Voltage Harmonic Distortion for Nonlinear Loads , 2012, IEEE Transactions on Industrial Electronics.

[27]  Ahmed F. Zobaa,et al.  A new approach for voltage harmonic distortion minimization , 2004 .

[28]  G. Box,et al.  On the Experimental Attainment of Optimum Conditions , 1951 .

[29]  M.H. Hocaoglu,et al.  Experimental verification of harmonic load models , 2008, 2008 43rd International Universities Power Engineering Conference.