Application of nanofluids for the optimal design of shell and tube heat exchangers using genetic algorithm

Abstract Optimization of shell and tube heat exchangers in industrial processes has always been a major goal for engineers and designers. The aim of the present study is to investigate application of alumina nanofluid to enhance the efficiency of heat exchangers while reducing energy consumption and overall cost. Alumina nanofluid increases the Nusselt number and thereby increases the heat transfer coefficient of shell and tube heat exchangers. Increased heat transfer coefficients reduce the required tube length leading to reduced pressure drop in the heat exchanger. In the case studied in this paper, over 185% increase in tube side heat transfer coefficient allows reduction of heat exchanger length and flow velocity and thereby reduction of pressure drop up to 94%. Consequently, the overall cost of the heat exchanger reduced more than 55%. Given the important results obtained from the use of nanofluid to enhance the efficiency of heat exchangers, the use of this technology is proposed as an efficient and practical method for the design of shell and tube heat exchangers.

[1]  Y. Xuan,et al.  Investigation on Convective Heat Transfer and Flow Features of Nanofluids , 2003 .

[2]  E. Damangir,et al.  Minimizing capital and operating costs of shell and tube condensers using optimum baffle spacing , 2004 .

[3]  J. Buongiorno,et al.  Experimental Investigation of Turbulent Convective Heat Transfer and Pressure Loss of Alumina/Water and Zirconia/Water Nanoparticle Colloids (Nanofluids) in Horizontal Tubes , 2008 .

[4]  Yavuz Özçelik,et al.  Exergetic optimization of shell and tube heat exchangers using a genetic based algorithm , 2007 .

[5]  R. W. Mayne,et al.  Heat exchanger optimization , 1978 .

[6]  Igor Bulatov,et al.  Cost estimation and energy price forecasts for economic evaluation of retrofit projects , 2003 .

[7]  M. Kovarik,et al.  Optimal Heat Exchangers , 1989 .

[8]  A. Unuvar,et al.  An approach for the optimum design of heat exchangers , 2004 .

[9]  Urmila M. Diwekar,et al.  Optimal Design of Heat Exchangers: A Genetic Algorithm Framework , 1999 .

[10]  Goldberg,et al.  Genetic algorithms , 1993, Robust Control Systems with Genetic Algorithms.

[11]  M. Saffar-Avval,et al.  A general correlation for determining optimum baffle spacing for all types of shell and tube exchangers , 1995 .

[12]  Saeed Zeinali Heris,et al.  EXPERIMENTAL INVESTIGATION OF CONVECTIVE HEAT TRANSFER OF AL2O3/WATER NANOFLUID IN CIRCULAR TUBE , 2007 .

[13]  Yulong Ding,et al.  Experimental investigation into convective heat transfer of nanofluids at the entrance region under laminar flow conditions , 2004 .

[14]  Jung-Yeul Jung,et al.  Forced convective heat transfer of nanofluids in microchannels , 2009 .

[15]  Urmila M. Diwekar,et al.  An automated approach for the optimal design of heat exchangers , 1997 .

[16]  C. T. Nguyen,et al.  Heat transfer enhancement using Al2O3–water nanofluid for an electronic liquid cooling system , 2007 .

[17]  Sarit K. Das,et al.  Heat Transfer in Nanofluids—A Review , 2006 .

[18]  J. Buongiorno.  Convective Transport in Nanofluids , 2006 .

[19]  U. Shrinivasa,et al.  Synthesis of Cost-Optimal Shell-and-Tube Heat Exchangers , 1991 .

[20]  Seok Pil Jang,et al.  Flow and convective heat transfer characteristics of water-based Al2O3 nanofluids in fully developed laminar flow regime , 2009 .

[21]  Young I Cho,et al.  HYDRODYNAMIC AND HEAT TRANSFER STUDY OF DISPERSED FLUIDS WITH SUBMICRON METALLIC OXIDE PARTICLES , 1998 .

[22]  I. Mudawar,et al.  Assessment of the effectiveness of nanofluids for single-phase and two-phase heat transfer in micro-channels , 2007 .

[23]  Antonio Casimiro Caputo,et al.  Heat exchanger design based on economic optimisation , 2008 .