Retardation of crack initiation and growth in austenitic stainless steels by laser peening without protective coating

Abstract Laser peening without protective coating (LPPC) has been applied to water-immersed SUS304 (Type 304) and SUS316L (Type 316L) austenitic stainless steels. The surface residual stress of both materials was converted from tensile to compressive of several hundreds of megapascals by LPPC with a Q-switched and frequency-doubled Nd:YAG laser. The depth of the compressive residual stresses after LPPC exceeded 1 mm from the surface. Accelerating stress corrosion cracking (SCC) tests in a high-temperature and corrosive-water environment showed that LPPC completely prevented the SCC initiation of sensitized SUS304. SCC tests of pre-cracked samples were also performed for SUS304, which indicated that LPPC inhibits the propagation of the small pre-cracks. Rotating bending tests demonstrated that the fatigue strength of SUS316L with LPPC is enhanced by 1.4–1.7 times compared to that of the reference material at 108 cycles.

[1]  P. Ballard,et al.  Physical study of laser-produced plasma in confined geometry , 1990 .

[2]  David F. Lahrman,et al.  Laser Shock Processing as a Surface Enhancement Process , 2001 .

[3]  Arvi Kruusing,et al.  Underwater and water-assisted laser processing: Part 1-general features, steam cleaning and shock processing [review article] , 2004 .

[4]  S. Ohya,et al.  Compressive Residual Stress Evolution Process by Laser Peening , 2005 .

[5]  Laurent Berthe,et al.  Laser-shock processing of aluminium-coated 55C1 steel in water-confinement regime, characterization and application to high-cycle fatigue behaviour , 1998 .

[6]  Y. Sano,et al.  Residual Stress Improvement Mechanism on Metal Material by Underwater Laser Irradiation. , 2000 .

[7]  S. R. Thompson,et al.  Fatigue crack nucleation and growth rate behavior of laser shock peened titanium , 1999 .

[8]  A. Kar,et al.  Temperatures, pressures and stresses during laser shock processing , 2003 .

[9]  R. Fabbro,et al.  Laser shock processing: a review of the physics and applications , 1995, Optical and Quantum Electronics.

[10]  Naruhiko Mukai,et al.  Residual stress improvement in metal surface by underwater laser irradiation , 1997 .

[11]  C. H. Skeen,et al.  Laser‐induced stress‐wave and impulse augmentation , 1972 .

[12]  R. Fabbro,et al.  Laser shock processing of aluminium alloys. Application to high cycle fatigue behaviour , 1996 .

[13]  Yung-Chiun Her,et al.  Laser shock peening on fatigue behavior of 2024-T3 Al alloy with fastener holes and stopholes , 2001 .

[14]  Y. Mai,et al.  Laser shock processing and its effects on microstructure and properties of metal alloys: a review , 2002 .

[15]  N. C. Anderholm.  LASER‐GENERATED STRESS WAVES , 1970 .

[16]  Laurent Berthe,et al.  Physics and applications of laser-shock processing , 1998 .

[17]  C. Brebbia,et al.  Surface Treatment VI: Computer Methods and Experimental Measurements for Surface Treatment Effects , 2003 .

[18]  D. N. Williams,et al.  Laser shock‐induced microstructural and mechanical property changes in 7075 aluminum , 1972 .