Damage localization approaches based on changes of flexibilities constitute an important technique for damage detection. However, the unavailability of flexibility matrix with output-only data makes flexibility-based approaches not really applicable in the very important cases of ambient vibrations. An algorithm is presented to construct a proportional flexibility matrix (PFM) from a set of arbitrarily scaled tested modal shapes and modal frequencies. The constructed PFM is just within a scalar multiplier to the real flexibility matrix, and the scalar multiplier is theoretically the first modal mass, which is undetermined before the mode is properly scaled. Instead of real flexibilities, the PFMs are incorporated into the damage locating vectors (DLV) method for damage localizations in ambient vibrations. PFMs for the pre- and post-damaged structure need to be comparable before being integrated into the DLV procedure. This requirement is guaranteed when there is at least one reference degree with unchanged mass after damage. Two numerical examples show that a small number of measured modes can produce PFMs with sufficient accuracy to correctly locate the damages by the DLV method from output-only data.
[1]
K. Park,et al.
Second-order structural identification procedure via state-space-based system identification
,
1994
.
[2]
Charles R. Farrar,et al.
Damage identification and health monitoring of structural and mechanical systems from changes in their vibration characteristics: A literature review
,
1996
.
[3]
Klaus G. Topole.
Damage evaluation via flexibility formulation
,
1997,
Smart Structures.
[4]
D. Bernal.
Load Vectors for Damage Localization
,
2002
.
[5]
A. K. Pandey,et al.
Damage Detection in Structures Using Changes in Flexibility
,
1994
.
[6]
Thomas G. Carne,et al.
The Natural Excitation Technique (NExT) for modal parameter extraction from operating wind turbines
,
1993
.
[7]
Paul Sas,et al.
Modal Analysis Theory and Testing
,
2005
.
[8]
Jer-Nan Juang,et al.
An eigensystem realization algorithm for modal parameter identification and model reduction. [control systems design for large space structures]
,
1985
.