Microstructure, mechanical and tribological properties of oxide dispersion strengthened CoCrFeMnNi high-entropy alloys fabricated by powder metallurgy

[1]  D. Raabe,et al.  Impact of interstitial elements on the stacking fault energy of an equiatomic CoCrNi medium entropy alloy: theory and experiments , 2022, Science and technology of advanced materials.

[2]  Hyoung Seop Kim,et al.  Strengthening the mechanical properties and wear resistance of CoCrFeMnNi high entropy alloy fabricated by powder metallurgy , 2022, Advanced Powder Technology.

[3]  D. Zeng,et al.  Microstructure and tribological properties of Al2O3 reinforced FeCoNiCrMn high entropy alloy composite coatings by cold spray , 2022, Surface and Coatings Technology.

[4]  Ashutosh Sharma,et al.  Effect of Additive Elements (x = Cr, Mn, Zn, Sn) on the Phase Evolution and Thermodynamic Complexity of AlCuSiFe-x High Entropy Alloys Fabricated via Powder Metallurgy , 2022, Metals and Materials International.

[5]  Hyoung-Seop Kim,et al.  Developing harmonic structure in CoCrFeMnNi high entropy alloy to enhance mechanical properties via powder metallurgy approach , 2022, Journal of Materials Research and Technology.

[6]  T. Han,et al.  Enhanced wearing resistance of carbide reinforced FeCoNiCrMn high entropy alloy prepared by mechanical alloying and spark plasma sintering , 2022, Materials Today Communications.

[7]  Zhen Lu,et al.  Excellent strength-ductility synergy of NiAl-based composites achieved by a 3-dimensional network structure , 2021, Composites Part B: Engineering.

[8]  Hyoung-Seop Kim,et al.  Worn surface and subsurface layer structure formation behavior on wear mechanism of CoCrFeMnNi high entropy alloy in different sliding conditions , 2021 .

[9]  A. Martini,et al.  Effect of carbon content on microstructure, hardness and wear resistance of CoCrFeMnNiCx high-entropy alloys , 2020, Journal of Alloys and Compounds.

[10]  X. J. Wang,et al.  Tribological behavior of boronized Al0.1CoCrFeNi high-entropy alloys under dry and lubricated conditions , 2020 .

[11]  G. Le,et al.  Phase transformation - induced strengthening of an additively manufactured multi- principal element CrMnFeCoNi alloy , 2020 .

[12]  N. Cornei,et al.  Influence of hafnium oxide on the structure and properties of powders and ceramics of the YSZ–HfO2 composition , 2020 .

[13]  Moataz M. Attallah,et al.  In-situ alloyed, oxide-dispersion-strengthened CoCrFeMnNi high entropy alloy fabricated via laser powder bed fusion , 2020, Materials & Design.

[14]  M. Godlewski,et al.  Tribological study of hafnium dioxide and aluminium oxide films grown by atomic layer deposition on glass substrate , 2020 .

[15]  Ashutosh Sharma,et al.  Lightweight AlCuFeMnMgTi High Entropy Alloy with High Strength-to-Density Ratio Processed by Powder Metallurgy , 2020, Metals and Materials International.

[16]  Zhijia Zhang,et al.  Microstructural and Tribological Characteristics of In Situ Induced Chrome Carbide Strengthened CoCrFeMnNi High-Entropy Alloys , 2020, Journal of Materials Engineering and Performance.

[17]  Chao Zhang,et al.  Microstructure and wear behavior of FeCoNiCrMn high entropy alloy coating deposited by plasma spraying , 2020 .

[18]  D. Raabe,et al.  Yield strength increase of a CoCrNi medium entropy alloy by interstitial nitrogen doping at maintained ductility , 2020 .

[19]  Jinqing Wang,et al.  Interrelated effects of temperature and load on fretting behavior of SAF 2507 super duplex stainless steel , 2019, Tribology International.

[20]  T. Shanmugasundaram,et al.  High temperature wear in CoCrFeNiCux high entropy alloys: The role of Cu , 2019, Scripta Materialia.

[21]  H. Stone,et al.  On the prediction and the formation of the sigma phase in CrMnCoFeNix high entropy alloys , 2019, Journal of Alloys and Compounds.

[22]  Vít Horník,et al.  Synergic strengthening by oxide and coherent precipitate dispersions in high-entropy alloy prepared by powder metallurgy , 2018, Scripta Materialia.

[23]  Jingchuan Zhu,et al.  Wear and oxidation resistances of AlCrFeNiTi-based high entropy alloys , 2018, Intermetallics.

[24]  R. Banerjee,et al.  High-entropy alloy strengthened by in situ formation of entropy-stabilized nano-dispersoids , 2018, Scientific Reports.

[25]  H. Torres,et al.  Tribological behaviour of self-lubricating materials at high temperatures , 2018 .

[26]  D. Janicki.  Microstructure and Sliding Wear Behaviour of In-Situ TiC-Reinforced Composite Surface Layers Fabricated on Ductile Cast Iron by Laser Alloying , 2018, Materials.

[27]  G. Sundararajan,et al.  Microstructure–mechanical property correlation in oxide dispersion strengthened 18Cr ferritic steel , 2017 .

[28]  Jiesheng Han,et al.  A novel CoCrFeNi high entropy alloy matrix self-lubricating composite , 2017 .

[29]  Xinyu Liu,et al.  Microstructure, Mechanical and Tribological Properties of Oxide Dispersion Strengthened High-Entropy Alloys , 2017, Materials.

[30]  R. Banerjee,et al.  Reciprocating sliding wear behavior of high entropy alloys in dry and marine environments , 2017 .

[31]  Ł. Rogal,et al.  CoCrFeMnNi high entropy alloy matrix nanocomposite with addition of Al2O3 , 2017 .

[32]  Ł. Rogal,et al.  Effect of SiC nano-particles on microstructure and mechanical properties of the CoCrFeMnNi high entropy alloy , 2017 .

[33]  Jenn‐Ming Yang,et al.  In-situ formation of novel TiC-particle-reinforced 316L stainless steel bulk-form composites by selective laser melting , 2017 .

[34]  J. Qiao,et al.  Microstructure and wear properties of nitrided AlCoCrFeNi high-entropy alloy , 2017 .

[35]  Hidemi Kato,et al.  Structure and properties of ultrafine-grained CoCrFeMnNi high-entropy alloys produced by mechanical alloying and spark plasma sintering , 2017 .

[36]  J. Matějíček,et al.  Oxide dispersion strengthened CoCrFeNiMn high-entropy alloy , 2017 .

[37]  Jiesheng Han,et al.  Microstructure, mechanical properties and tribological performance of CoCrFeNi high entropy alloy matrix self-lubricating composite , 2017 .

[38]  N. Stepanov,et al.  Second phase formation in the CoCrFeNiMn high entropy alloy after recrystallization annealing , 2016 .

[39]  D. Miracle,et al.  A critical review of high entropy alloys and related concepts , 2016 .

[40]  G. Tallarida,et al.  Hardness, elastic modulus, and wear resistance of hafnium oxide-based films grown by atomic layer deposition , 2016 .

[41]  M. Mansoor,et al.  Carbon nanotube-reinforced aluminum composite produced by induction melting , 2016 .

[42]  Jun Wang,et al.  Tribological Behavior of AlCoCrFeNi(Ti0.5) High Entropy Alloys under Oil and MACs Lubrication , 2016 .

[43]  Fouad,et al.  Wear Characterization of Aluminum Matrix Hybrid Composites Reinforced with Nanoparticles of Al2O3 and TiO2 , 2015 .

[44]  C. Tasan,et al.  Design of a twinning-induced plasticity high entropy alloy , 2015 .

[45]  G. Eggeler,et al.  The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy , 2013 .

[46]  A. V. Durov.  Wetting of hafnium dioxide by pure metals , 2011 .

[47]  J. Yeh,et al.  Effect of iron content on wear behavior of AlCoCrFexMo0.5Ni high-entropy alloys , 2010 .

[48]  Jien-Wei Yeh,et al.  Adhesive wear behavior of AlxCoCrCuFeNi high-entropy alloys as a function of aluminum content , 2006 .

[49]  J. Archard.  Contact and Rubbing of Flat Surfaces , 1953 .