Dilation in granite during servo-controlled triaxial strength tests

Abstract We investigated the stress–strain response of three different intact granitic rocks. To do this, a press with servo-controlled loading was modified to control the confining pressure in triaxial tests and to measure the volume of hydraulic fluid displaced from Hoek's triaxial cell so that this volume could be related to volumetric strain in the rock sample. A series of unconfined and confined compressive tests were performed on the rock samples and results were plotted, analysed and interpreted regarding the most relevant parameters, including elastic, strength and post-failure parameters, with special attention paid to the dilation angle. Our main conclusions refer to the capability to investigate consistent post-failure rock properties by means of servo-controlled loading set-ups, which we plan to improve in the future. The dilation angle of granite was captured, with all the tested granites showing similar behaviour trends that fit reasonably well with recently developed theories on plastic shear-strain and confinement-stress-dependent dilation and that are analogous to those observed for other hard rocks.

[1]  Allen W. Hatheway,et al.  The Complete ISRM Suggested Methods for Rock Characterization, Testing and Monitoring; 1974–2006 , 2009 .

[2]  I. Lee,et al.  Computer controlled volumetric strain measurements in metadolerite , 1985 .

[3]  Emmanuel M Detournay,et al.  Elastoplastic model of a deep tunnel for a rock with variable dilatancy , 1986 .

[4]  N. Cook.  An experiment proving that dilatancy is a pervasive volumetric property of brittle rock loaded to failure , 1970 .

[5]  F. J. Santarelli,et al.  Influence of stress-dependent elastic moduli on stresses and strains around axisymmetric boreholes , 1989 .

[6]  A. B. Singh.  Study of Rock Fracture by Permeability Method , 1997 .

[7]  E. Alonso,et al.  Application of the convergence-confinement method to tunnels in rock masses exhibiting Hoek–Brown strain-softening behaviour , 2010 .

[8]  Evert Hoek,et al.  Practical estimates of rock mass strength , 1997 .

[9]  W. R. Wawersik,et al.  A study of brittle rock fracture in laboratory compression experiments , 1970 .

[10]  John A. Hudson,et al.  Optimizing the control of rock failure in servo-controlled laboratory tests , 1971 .

[11]  S. D. Butt,et al.  Evaluation of acoustic attenuation as an indicator of roof stability in advancing headings , 2000 .

[12]  Leandro R. Alejano,et al.  Ground reaction curves for tunnels excavated in different quality rock masses showing several types of post-failure behaviour , 2009 .

[13]  E. T. Brown,et al.  A study of the mechanical behaviour of coal for pillar design , 1998 .

[14]  I. W. Farmer,et al.  Application of yield models to rock , 1979 .

[15]  W. R. Wawersik,et al.  Post-failure behavior of a granite and diabase , 1971 .

[16]  J. Harrison,et al.  An empirical dilatancy index for the dilatant deformation of rock , 2004 .

[17]  Leandro R. Alejano,et al.  Plastic radii and longitudinal deformation profiles of tunnels excavated in strain-softening rock masses , 2012 .

[18]  John A. Hudson,et al.  SOFT, STIFF AND SERVO-CONTROLLED TESTING MACHINES: A REVIEW WITH REFERENCE TO ROCK FAILURE , 1972 .

[19]  W. R. Wawersik.  Technique and apparatus for strain measurements on rock in constant confining pressure experiments , 1975 .

[20]  Terrence Paul Medhurst.  Estimation of the in situ strength and deformability of coal for engineering design , 1996 .

[21]  M. Bukowska.  Mechanical Properties of Carboniferous Rocks in the Upper Silesian Coal Basin under Uniaxial and Triaxial Compression Tests , 2005 .

[22]  S. Nambu,et al.  Support Design of a Large Underground Cavern Considering Strain-softening of Rock , 1999 .

[23]  E. T. Brown,et al.  Yield of a soft, high porosity rock , 1985 .

[24]  John A. Hudson,et al.  Comprehensive rock engineering , 1993 .

[25]  Steven L. Crouch,et al.  Experimental determination of volumetric strains in failed rock , 1970 .

[26]  Ming Cai,et al.  Influence of plastic shear strain and confinement-dependent rock dilation on rock failure and displacement near an excavation boundary , 2010 .

[27]  T. Kármán.  Festigkeitsversuche unter allseitigem Druck , 1912 .

[28]  E. Alonso,et al.  Considerations of the dilatancy angle in rocks and rock masses , 2005 .

[29]  Nick Barton,et al.  The shear strength of rock and rock joints , 1976 .

[30]  Christopher H. Scholz,et al.  Microfracturing and the inelastic deformation of rock in compression , 1968 .

[31]  John A. Hudson,et al.  Shape of the Complete Stress-Strain Curve for Rock , 1972 .

[32]  Ming Cai,et al.  A mobilized dilation angle model for rocks , 2010 .

[33]  R. Borst,et al.  Non-Associated Plasticity for Soils, Concrete and Rock , 1984 .

[34]  C. Fairhurst,et al.  Determination of the post-failure behavior of brittle rock using a servo-controlled testing machine , 1970 .

[35]  D. Holcomb.  A quantitative model of dilatancy in dry rock and its application to westerly granite , 1978 .

[36]  H. Gerçek,et al.  Poisson's ratio values for rocks , 2007 .