论文信息 - Finite element simulation of axial elastic characteristics of wire rope with one round strand layer

Finite element simulation of axial elastic characteristics of wire rope with one round strand layer

Based on the special transform of graphics, the general mathematical geometric models of different wire ropes with defined initial parameters are presented. On this basis, the geometric model of IWRC6*36WS wire rope is set up by using Matlab and Pro/E. Abaqus/Explicit is used to analyze the elastic property of the wire rope under axial tension. The simulation analysis results show that the nonlinear relationship between the axial tension and the axial elongation of the wire rope is obvious.

[1] J. L. Henshall,et al. The development and applications of the helically symmetric boundary conditions in finite element analysis , 1999 .

[2] Michel R. Labrosse,et al. A finite element model for simple straight wire rope strands , 2000 .

[3] Li Lin. Finite Element Analysis of Steel Wire Ropes for Ships in Considering Extrusion Case , 2003 .

[4] Wg Jiang,et al. A concise finite element model for simple straight wire rope strand , 1999 .

[5] Sun Jie. Numerical Simulation of Knotted Wire Rope with Finite Element Method , 2011 .

[6] Patrice Cartraud,et al. Validity and limitations of linear analytical models for steel wire strands under axial loading, using a 3D FE model , 2007 .

[7] Stanislav Kmet,et al. Computer modelling of wire strands and ropes Part I: Theory and computer implementation , 2011, Adv. Eng. Softw..

[8] J. L. Henshall,et al. A novel finite element model for helical springs , 2000 .

[9] Stanislav Kmet,et al. Computer modelling of wire strands and ropes part II: Finite element-based applications , 2011, Adv. Eng. Softw..