Highly water-dispersible biocompatible magnetite particles with low cytotoxicity stabilized by citrate groups.

The synthesis of functional nanoparticles with controllable size and shape is of great importance because of their fundamental scientific significance and broad technological applications. Magnetic nanocrystals have attracted much attention in the past few decades owing to their unique magnetic features and important applications in biomedicine and therapeutics. In particular, superparamagnetic nanoparticles have been extensively pursued for bioseparation, drug delivery, 20] and detection of cancer. 21–22] Among various magnetic nanoparticles, iron oxides, such as magnetite (Fe3O4) or maghemite (g-Fe2O3), have been considered as ideal candidates for these bio-related applications owing to their good biocompatibility and stability in physiological conditions and low cytotoxicity. Many methods have been developed to prepare iron oxide nanocrystals. The thermal decomposition of organometallic and coordination compounds in nonpolar solution has been used successfully for the synthesis of monodisperse magnetic nanocrystals with high crystallinity and small size on the nanometer scale. However, the magnetic nanocrystals synthesized by these methods are usually hydrophobic, stabilized by nondegradable surfactants, and have a low magnetization, which hampers their applications extremely in bio-related fields, where water-dispersible particles with high magnetic field responsiveness are in demand. Therefore, much effort has focused on the fabrication of water-soluble iron oxide nanocrystals with controllable sizes, fast magnetic response, and desirable surface properties. Although many ligand-exchange strategies have been explored to offer them hydrophilic surface and aqueous dispersibility, their magnetic field responsiveness has not been effectively improved. Li and co-workers reported a convenient synthesis of hydrophilic magnetite microspheres by a solvothermal reaction by reduction of FeCl3 with ethylene glycol (EG), but the resultant magnetite microspheres are ferromagnetic and not water dispersible. Recently, they synthesized magnetic microspheres using a microemulsion of oil droplets in water as confined templates. These magnetic nanoparticles are assembled with the evaporation of low-boiling-point solvents. More recently, by a using high-temperature reduction reaction with poly(acrylic acid) (PAA) as a stabilizer, FeCl3 as a precursor, and diethylene glycol as a reductant, Ge et al. directly fabricated water-dispersible superparamagnetic nanocrystal clusters with controllable diameters of 30– 180 nm. These nanoclusters are composed of small nanocrystals of 6–8 nm. However, the polyelectrolyte PAA attached on the magnetic clusters is not biodegradable and biocompatible, and thus may limit their applications. Herein, we report a facile synthesis of highly water-dispersible magnetite particles with tunable size by a modified solvothermal reaction. The magnetite particles were synthesized by a modified solvothermal reaction at 200 8C by reduction of FeCl3 with EG in the presence of sodium acetate as an alkali source and biocompatible trisodium citrate (Na3Cit) as an electrostatic stabilizer. The excess EG acts as both the solvent and reductant. Na3Cit was chosen because the three carboxylate groups have strong coordination affinity to Fe ions, which favors the attachment of citrate groups on the surface of the magnetite nanocrystals and prevents them from aggregating into large single crystals as occurred previously. Moreover, Na3Cit is widely used in food and drug industry and citric acid is one of products from tricarboxylic acid cycle (TAC), a normal metabolic process in human body. Typically, the 250 nm magnetite particles were synthesized with the composition of FeCl3/Na3Cit/NaOAc/EG = 1:0.17:36.5:89.5 at 200 8C for 10 h (see the Supporting Information for experimental details). Scanning electron microscopy (SEM) images show that when the FeCl3 concentration is in the range of 0.05 to 0.25 molL , all of the magnetite particles obtained have a nearly spherical shape and uniform size (Figure 1). The diameter of the spheres dramatically increases from 80 to 410 nm with the increase of FeCl3 concentration, indicating that higher FeCl3 concentrations can lead to a larger particle size. Transmission electron microscopy (TEM) (Figure 2 a) reveals that the magnetite particles prepared from 0.2 molL 1 of FeCl3 have a nearly uniform size of about 250 nm and spherical shape, which is in good agreement to the SEM results (Figure 1c). A TEM image at higher magnification [*] J. Liu, Z. K. Sun, Dr. Y. H. Deng, Y. Zou, C. Y. Li, Dr. X. H. Guo, L. Q. Xiong, Y. Gao, Prof. Dr. F. Y. Li, Prof. Dr. D. Y. Zhao Department of Chemistry, Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials and Advanced Materials Laboratory, Fudan University Shanghai 200433 (China) Fax: (+ 86)21-6564-1740 E-mail: yhdeng@fudan.edu.cn dyzhao@fudan.edu.cn Homepage: http://homepage.fudan.edu.cn/~dyzhao/