A domain adaptation model for early gear pitting fault diagnosis based on deep transfer learning network

In recent years, research on gear pitting fault diagnosis has been conducted. Most of the research has focused on feature extraction and feature selection process, and diagnostic models are only suitable for one working condition. To diagnose early gear pitting faults under multiple working conditions, this article proposes to develop a domain adaptation diagnostic model–based improved deep neural network and transfer learning with raw vibration signals. A particle swarm optimization algorithm and L2 regularization are used to optimize the improved deep neural network to improve the stability and accuracy of the diagnosis. When using the domain adaptation diagnostic model for fault diagnosis, it is necessary to discriminate whether the target domain (test data) is the same as the source domain (training data). If the target domain and the source domain are consistent, the trained improved deep neural network can be used directly for diagnosis. Otherwise, the transfer learning is combined with improved deep neural network to develop a deep transfer learning network to improve the domain adaptability of the diagnostic model. Vibration signals for seven gear types with early pitting faults under 25 working conditions collected from a gear test rig are used to validate the proposed method. It is confirmed by the validation results that the developed domain adaptation diagnostic model has a significant improvement in the adaptability of multiple working conditions.

[1]  Jun Wang,et al.  An intelligent diagnosis scheme based on generative adversarial learning deep neural networks and its application to planetary gearbox fault pattern recognition , 2018, Neurocomputing.

[2]  Jürgen Schmidhuber,et al.  Deep learning in neural networks: An overview , 2014, Neural Networks.

[3]  Qi Wang,et al.  Salience based object tracking in complex scenes , 2018, Neurocomputing.

[4]  Zhencai Zhu,et al.  A new fault feature for rolling bearing fault diagnosis under varying speed conditions , 2017 .

[5]  Raja Ishak Raja Hamzah,et al.  Acoustic Emission Signal Analysis and Artificial Intelligence Techniques in Machine Condition Monitoring and Fault Diagnosis: A Review , 2014 .

[6]  Chen Lu,et al.  Fault Diagnosis for Rolling Bearings under Variable Conditions Based on Visual Cognition , 2017, Materials.

[7]  Xianjiang Shi,et al.  Simulation study on gear fault diagnosis simulation test-bed of doubly fed wind generator , 2017, 2017 12th International Conference on Computer Science and Education (ICCSE).

[8]  Ruqiang Yan,et al.  A sparse auto-encoder-based deep neural network approach for induction motor faults classification , 2016 .

[9]  K. I. Ramachandran,et al.  Fault diagnosis of spur bevel gear box using artificial neural network (ANN), and proximal support vector machine (PSVM) , 2010, Appl. Soft Comput..

[10]  Binqiang Chen,et al.  An Intelligent Gear Fault Diagnosis Methodology Using a Complex Wavelet Enhanced Convolutional Neural Network , 2017, Materials.

[11]  SchmidhuberJürgen.  Deep learning in neural networks , 2015 .

[12]  Islamic Azad,et al.  Comparison of Particle Swarm Optimization and Backpropagation Algorithms for Training Feedforward Neural Network , 2014 .

[13]  K. R. Al-Balushi,et al.  Artificial neural networks and support vector machines with genetic algorithm for bearing fault detection , 2003 .

[14]  Ran Zhang,et al.  Fault Diagnosis from Raw Sensor Data Using Deep Neural Networks Considering Temporal Coherence , 2017, Sensors.

[15]  Peng Wang,et al.  An Adaptive Multi-Sensor Data Fusion Method Based on Deep Convolutional Neural Networks for Fault Diagnosis of Planetary Gearbox , 2017, Sensors.

[16]  Xueliang Li,et al.  A seismic fault recognition method based on ant colony optimization , 2018 .

[17]  Zhanpeng Zhang,et al.  A deep belief network based fault diagnosis model for complex chemical processes , 2017, Comput. Chem. Eng..

[18]  Hai Rong Fang.  Monopole-Gear Design Based on Neural Network and Modified Particle Swarm Optimization , 2013 .

[19]  Haidong Shao,et al.  Rolling bearing fault diagnosis using adaptive deep belief network with dual-tree complex wavelet packet. , 2017, ISA transactions.

[20]  Haidong Shao,et al.  A novel method for intelligent fault diagnosis of rolling bearings using ensemble deep auto-encoders , 2018 .

[21]  Shunming Li,et al.  A New Transfer Learning Method and its Application on Rotating Machine Fault Diagnosis Under Variant Working Conditions , 2018, IEEE Access.

[22]  Xin Ye,et al.  A novel adaptive fault detection methodology for complex system using deep belief networks and multiple models: A case study on cryogenic propellant loading system , 2018, Neurocomputing.

[23]  Xuan Wang,et al.  Rolling Bearing Fault Diagnosis under Variable Conditions Using Hilbert-Huang Transform and Singular Value Decomposition , 2014 .

[24]  Yee Whye Teh,et al.  A Fast Learning Algorithm for Deep Belief Nets , 2006, Neural Computation.

[25]  Chen Lu,et al.  Intelligent fault diagnosis of rolling bearing using hierarchical convolutional network based health state classification , 2017, Adv. Eng. Informatics.

[26]  Mingyang Jiang,et al.  Text Classification Based on ReLU Activation Function of SAE Algorithm , 2017, ISNN.

[27]  Jiong Tang,et al.  Preprocessing-Free Gear Fault Diagnosis Using Small Datasets With Deep Convolutional Neural Network-Based Transfer Learning , 2017, IEEE Access.

[28]  Tao Zhang,et al.  A novel feature extraction method using deep neural network for rolling bearing fault diagnosis , 2015, The 27th Chinese Control and Decision Conference (2015 CCDC).

[29]  ZhiQiang Chen,et al.  Gearbox Fault Identification and Classification with Convolutional Neural Networks , 2015 .

[30]  Ruqiang Yan,et al.  Highly Accurate Machine Fault Diagnosis Using Deep Transfer Learning , 2019, IEEE Transactions on Industrial Informatics.

[31]  Wei Li,et al.  Bearing Fault Diagnosis Based on Domain Adaptation Using Transferable Features under Different Working Conditions , 2018, Shock and Vibration.

[32]  Yurong Liu,et al.  A survey of deep neural network architectures and their applications , 2017, Neurocomputing.

[33]  K. Manivannan,et al.  A Gear Fault Identification using Wavelet Transform, Rough set Based GA, ANN and C4.5 Algorithm , 2014 .

[34]  Sepp Hochreiter,et al.  Fast and Accurate Deep Network Learning by Exponential Linear Units (ELUs) , 2015, ICLR.

[35]  Jian-Da Wu,et al.  Faulted gear identification of a rotating machinery based on wavelet transform and artificial neural network , 2009, Expert Syst. Appl..

[36]  T Bi,et al.  A novel ANN fault diagnosis system for power systems using dual GA loops in ANN training , 2000, 2000 Power Engineering Society Summer Meeting (Cat. No.00CH37134).

[37]  Wei Zhang,et al.  Modified compensation algorithm of lever-arm effect and flexural deformation for polar shipborne transfer alignment based on improved adaptive Kalman filter , 2017 .

[38]  Ran Zhang,et al.  Transfer Learning With Neural Networks for Bearing Fault Diagnosis in Changing Working Conditions , 2017, IEEE Access.

[39]  Yaguo Lei,et al.  A probability distribution model of tooth pits for evaluating time-varying mesh stiffness of pitting gears , 2018, Mechanical Systems and Signal Processing.

[40]  David He,et al.  Detection of Pitting in Gears Using a Deep Sparse Autoencoder , 2017 .

[41]  Jun Ye,et al.  Fault diagnosis of turbine based on fuzzy cross entropy of vague sets , 2009, Expert Syst. Appl..

[42]  Vaishali R. Kulkarni,et al.  ABC and PSO: A comparative analysis , 2016 .

[43]  Shahin Hedayati Kia,et al.  Gear fault diagnosis using discrete wavelet transform and deep neural networks , 2016, IECON 2016 - 42nd Annual Conference of the IEEE Industrial Electronics Society.

[44]  Ahmed Braham,et al.  Recursive Undecimated Wavelet Packet Transform and DAG SVM for Induction Motor Diagnosis , 2015, IEEE Transactions on Industrial Informatics.

[45]  Xin Zhou,et al.  Deep neural networks: A promising tool for fault characteristic mining and intelligent diagnosis of rotating machinery with massive data , 2016 .

[46]  Tommy W. S. Chow,et al.  Rolling fault diagnosis via robust semi-supervised model with capped l2,1-norm regularization , 2017, 2017 IEEE International Conference on Industrial Technology (ICIT).

[47]  Jun Zhang,et al.  Resultant vibration signal model based fault diagnosis of a single stage planetary gear train with an incipient tooth crack on the sun gear , 2018, Renewable Energy.

[48]  Hongkai Jiang,et al.  An adaptive deep convolutional neural network for rolling bearing fault diagnosis , 2017 .

[49]  Joo-Ho Choi,et al.  Gear fault diagnosis using transmission error and ensemble empirical mode decomposition , 2018, Mechanical Systems and Signal Processing.