A Novel High Gain Bidirectional Multiport DC-DC Converter to Interface PV, Battery, and Ultracapacitor with Microgrid System

In this paper, a high gain multiport bidirectional DC to DC converter is proposed. It has applications in hybrid electric vehicles and AC/DC microgrid system. Converter has bidirectional power flow capability and inter source power sharing. It can be used for both equal and unequal voltage sources.There are three inputs ports, one for the source, second is the storage port, and third one is used for the ultracapacitor to reduce the battery size in peak hour loading. Coupled inductor is used for high gain capability. Depending on the battery and ultra capacitor charge and discharged, three operating modes are defined. Operation and analysis is discussed for all three operating modes. Converter modeling and simulation is performed using SIMULINK (MATLAB). Converter has high gain in all the operating modes. To validate the simulated and theoretical results a prototype of 500 W, 1 A is developed using hardware in the loop simulation dSPACE (DS1104) system.

[1]  Ali Ajami,et al.  Soft switching method for multiport DC/DC converters applicable in grid connected clean energy sources , 2015 .

[2]  Alireza Khaligh,et al.  Comparative Analysis of Bidirectional Three-Level DC–DC Converter for Automotive Applications , 2015, IEEE Transactions on Industrial Electronics.

[3]  Jonathan W. Kimball,et al.  High Gain DC–DC Converter Based on the Cockcroft–Walton Multiplier , 2016, IEEE Transactions on Power Electronics.

[4]  Xuefeng Hu,et al.  A High Voltage Gain DC–DC Converter Integrating Coupled-Inductor and Diode–Capacitor Techniques , 2014, IEEE Transactions on Power Electronics.

[5]  A. Kwasinski,et al.  Identification of Feasible Topologies for Multiple-Input DC–DC Converters , 2009, IEEE Transactions on Power Electronics.

[6]  Ebrahim Babaei,et al.  Structure for multi-input multi-output dc–dc boost converter , 2016 .

[7]  Wei Qiao,et al.  An Isolated Multiport DC–DC Converter for Simultaneous Power Management of Multiple Different Renewable Energy Sources , 2014, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[8]  Zhe Zhang,et al.  A Review and Design of Power Electronics Converters for Fuel Cell Hybrid System Applications , 2012 .

[9]  Wei Qiao,et al.  An Isolated Three-Port Bidirectional DC–DC Converter for Photovoltaic Systems With Energy Storage , 2015 .

[10]  Enrique Romero-Cadaval,et al.  Power converter interfaces for electrochemical energy storage systems – A review , 2014 .

[11]  Bernard Davat,et al.  Control of a Hybrid Energy Source Comprising a Fuel Cell and Two Storage Devices Using Isolated Three-Port Bidirectional DC–DC Converters , 2015 .

[12]  Masanori Ishigaki,et al.  Analysis and Design of a Multiport Converter Using a Magnetic Coupling Inductor Technique , 2015, IEEE Transactions on Industry Applications.

[13]  Mehrdad Tarafdar Hagh,et al.  A Nonisolated Multiinput Multioutput DC–DC Boost Converter for Electric Vehicle Applications , 2015, IEEE Transactions on Power Electronics.

[14]  Fernando Lessa Tofoli,et al.  Survey on non-isolated high-voltage step-up dc–dc topologies based on the boost converter , 2015 .

[15]  Alireza Khaligh,et al.  Optimization of Sizing and Battery Cycle Life in Battery/Ultracapacitor Hybrid Energy Storage Systems for Electric Vehicle Applications , 2014, IEEE Transactions on Industrial Informatics.

[16]  Kashem M. Muttaqi,et al.  A review of topologies of three-port DC–DC converters for the integration of renewable energy and energy storage system , 2016 .

[17]  Alireza Khaligh,et al.  A Supervisory Power-Splitting Approach for a New Ultracapacitor–Battery Vehicle Deploying Two Propulsion Machines , 2014, IEEE Transactions on Industrial Informatics.

[18]  B. Nahid-Mobarakeh,et al.  Control of a Hybrid Energy Source Comprising a Fuel Cell and Two Storage Devices Using Isolated Three-Port Bidirectional DC–DC Converters , 2013, IEEE Transactions on Industry Applications.

[19]  Juan C. Vasquez,et al.  DC Microgrids—Part II: A Review of Power Architectures, Applications, and Standardization Issues , 2016, IEEE Transactions on Power Electronics.

[20]  Poria Fajri,et al.  A DC–DC Converter With High Voltage Gain and Two Input Boost Stages , 2016, IEEE Transactions on Power Electronics.

[21]  Weidong Xiao,et al.  A review of grid-tied converter topologies used in photovoltaic systems , 2016 .