Effect of sample tilt on nanoindentation behaviour of materials

Analysis of nanoindentation is based on the elastic solution of a rigid indenter perpendicularly penetrating a flat contact surface. In reality, nanoindentation is often performed on a tilt sample surface due to sample tilt mounting or the existing roughness of a polished or raw surface. In this study, finite element simulations as well as nanoindentation experiments on a fused-quartz sample with different tilt angles were carried out to investigate the influence of sample tilt on nanoindentation behaviour of materials. It was found that sample tilt results in increases in the indentation load, contact area and contact stiffness at the same penetration depth. The contact area increase caused by sample tilt cannot be accounted for by Sneddon's equation, commonly used in nanoindentation analysis. This results in a significant underestimation of indentation projected contact area, which in turn leads to an overestimation of the mechanical properties measured by nanoindentation.

[1]  M. Anglada,et al.  Contact Deformation Regimes Around Sharp Indentations and the Concept of the Characteristic Strain , 2002 .

[2]  Alexei Bolshakov,et al.  Influences of pileup on the measurement of mechanical properties by load and depth sensing indentation techniques , 1998 .

[3]  Sandrine Bec,et al.  Improvements in the indentation method with a surface force apparatus , 1996 .

[4]  Remo Guidieri.  Res , 1995, RES: Anthropology and Aesthetics.

[5]  G. Pharr,et al.  Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology , 2004 .

[6]  G. Pharr,et al.  An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments , 1992 .

[7]  I. N. Sneddon.  The relation between load and penetration in the axisymmetric boussinesq problem for a punch of arbitrary profile , 1965 .

[8]  David Tabor,et al.  Plastic indentation in metals with cones , 1965 .

[9]  J. Ågren,et al.  An analysis of piling-up or sinking-in behaviour of elastic–plastic materials under a sharp indentation , 2004 .

[10]  Alexei Bolshakov,et al.  A critical examination of the fundamental relations used in the analysis of nanoindentation data , 1999 .

[11]  C. Murphy,et al.  Nanoindentation of Cu2O Nanocubes , 2004 .

[12]  William D. Nix,et al.  A method for interpreting the data from depth-sensing indentation instruments , 1986 .

[13]  J. Georges,et al.  Vickers Indentation Curves of Magnesium Oxide (MgO) , 1984 .

[14]  K. Johnson.  Contact Mechanics: Frontmatter , 1985 .

[15]  Subra Suresh,et al.  DETERMINATION OF ELASTOPLASTIC PROPERTIES BY INSTRUMENTED SHARP INDENTATION , 1999 .

[16]  Yang-Tse Cheng,et al.  Effects of 'sinking in' and 'piling up' on estimating the contact area under load in indentation , 1998 .

[17]  C. Murphy,et al.  Nanoindentation of Silver Nanowires , 2003 .

[18]  I. N. Sneddon,et al.  Boussinesq's problem for a rigid cone , 1948, Mathematical Proceedings of the Cambridge Philosophical Society.