Analytical modeling of micro-milling operations on biocompatible Ti6Al4V titanium alloy

[1]  Andrea Abeni,et al.  Comparison Between Micro Machining of Additively Manufactured and Conventionally Formed Samples of Ti6Al4V Alloy , 2021, Lecture Notes in Mechanical Engineering.

[2]  Andrea Abeni,et al.  Experimental Optimization of Process Parameters in CuNi18Zn20 Micromachining , 2021, Micromachines.

[3]  Moataz M. Attallah,et al.  Surface finish of Additively Manufactured Metals: biofilm formation and cellular attachment , 2021 .

[4]  S. Giliani,et al.  Selective Laser Melting and Electron Beam Melting of Ti6Al4V for Orthopedic Applications: A Comparative Study on the Applied Building Direction , 2020, Materials.

[5]  T. Özel,et al.  Analytical force modelling for micro milling additively fabricated Inconel 625 , 2020, Production Engineering.

[6]  E. Schindelholz,et al.  How build angle and post-processing impact roughness and corrosion of additively manufactured 316L stainless steel , 2020, npj Materials Degradation.

[7]  T. Woodfield,et al.  Rational design, bio-functionalization and biological performance of hybrid additive manufactured titanium implants for orthopaedic applications: A review. , 2020, Journal of the mechanical behavior of biomedical materials.

[8]  A. du Plessis,et al.  Effects of defects on mechanical properties in metal additive manufacturing: A review focusing on X-ray tomography insights , 2020 .

[9]  Andrea Abeni,et al.  Micro-milling of Selective Laser Melted Stainless Steel , 2020 .

[10]  Elisabetta Ceretti,et al.  Post Processing of 3D Printed Metal Scaffolds: a Preliminary Study of Antimicrobial Efficiency , 2020 .

[11]  Aldo Attanasio,et al.  An Experimental Study on Micro-Milling of a Medical Grade Co-Cr-Mo Alloy Produced by Selective Laser Melting , 2019, Materials.

[12]  Paul J. Scott,et al.  Characterisation methods for powder bed fusion processed surface topography , 2019, Precision Engineering.

[13]  T. Özel,et al.  Finite element simulation of high speed micro milling in the presence of tool run-out with experimental validations , 2018, The International Journal of Advanced Manufacturing Technology.

[14]  Enrico Filippi,et al.  Dynamic simulation of milling operations with small diameter milling cutters: effect of material heterogeneity on the cutting force model , 2017 .

[15]  Changkui Liu,et al.  A Comparison of Biocompatibility of a Titanium Alloy Fabricated by Electron Beam Melting and Selective Laser Melting , 2016, PloS one.

[16]  B. Stucker,et al.  Microstructures and Mechanical Properties of Ti6Al4V Parts Fabricated by Selective Laser Melting and Electron Beam Melting , 2013, Journal of Materials Engineering and Performance.

[17]  Martin B.G. Jun,et al.  Modeling of minimum uncut chip thickness in micro machining of aluminum , 2012 .

[18]  Sara M. Gaytan,et al.  Evaluation of Titanium Alloys Fabricated Using Rapid Prototyping Technologies—Electron Beam Melting and Laser Beam Melting , 2011, Materials.

[19]  N. Baskar,et al.  Particle swarm optimization technique for determining optimal machining parameters of different work piece materials in turning operation , 2011 .

[20]  J. Ciurana,et al.  Neural Network Modeling and Particle Swarm Optimization (PSO) of Process Parameters in Pulsed Laser Micromachining of Hardened AISI H13 Steel , 2009 .