Predicting individual stem volumes of sugi (Cryptomeria japonica D. Don) plantations in mountainous areas using small-footprint airborne LiDAR

This study investigated which predictor variables with respect to crown properties, derived from small-footprint airborne light detection and ranging (LiDAR) data, together with LiDAR-derived tree height, could be useful in regression models to predict individual stem volumes. Comparisons were also made of the sum of predicted stem volumes for LiDAR-detected trees using the best regression model with field-measured total stem volumes for all trees within stands. The study area was a 48-year-old sugi (Cryptomeria japonica D. Don) plantation in mountainous forest. The topographies of the three stands with different stand characteristics analyzed in this study were steep slope (mean slope ± SD; 37.6° ± 5.8°), gentle slope (15.6° ± 3.7°), and gentle yet rough terrain (16.8° ± 7.8°). In the regression analysis, field-measured stem volumes were regressed against each of the six LiDAR-derived predictor variables with respect to crown properties, such as crown area, volume, and form, together with LiDAR-derived tree height. The model with sunny crown mantle volume (SCV) had the smallest standard error of the estimate obtained from the regression model in each stand. The standard errors (m3) were 0.144, 0.171, and 0.181, corresponding to 23.9%, 21.0%, and 20.6% of the average field-measured stem volume for detected trees in each of these stands, respectively. Furthermore, the sum of the individual stem volumes, predicted by regression models with SCV for the detected trees, occupied 83%–91% of field-measured total stem volumes within each stand, although 69%–86% of the total number of trees were correctly detected by a segmentation procedure using LiDAR data.

[1]  S. Franklin,et al.  Remote sensing of forest environments : concepts and case studies , 2003 .

[2]  Matti Maltamo,et al.  Estimating stand characteristics by combining single tree pattern recognition of digital video imagery and a theoretical diameter distribution model , 2003 .

[3]  Kazukiyo Yamamoto,et al.  Estimating individual tree heights of sugi (Cryptomeria japonica D. Don) plantations in mountainous areas using small-footprint airborne LiDAR , 2005, Journal of Forest Research.

[4]  Michael A. Wulder,et al.  Tree and Canopy Height Estimation with Scanning Lidar , 2003 .

[5]  S. Ustin,et al.  Modeling airborne laser scanning data for the spatial generation of critical forest parameters in fire behavior modeling , 2003 .

[6]  Yoshiki Yamagata,et al.  Development of Measurement System for the Carbon Sinks under the Kyoto Protocol , 2002 .

[7]  Scott D. Roberts,et al.  Detection of regularly spaced targets in small-footprint LIDAR data: Research issues for consideration , 2001 .

[8]  Jeffrey S. Racine,et al.  Consistent cross-validatory model-selection for dependent data: hv-block cross-validation , 2000 .

[9]  Åsa Persson,et al.  Detecting and measuring individual trees using an airborne laser scanner , 2002 .

[10]  Randolph H. Wynne,et al.  Estimating plot-level tree heights with lidar : local filtering with a canopy-height based variable window size , 2002 .

[11]  Mikko Inkinen,et al.  A segmentation-based method to retrieve stem volume estimates from 3-D tree height models produced by laser scanners , 2001, IEEE Trans. Geosci. Remote. Sens..

[12]  G. Qiu,et al.  Accurate estimation of forest carbon stocks by 3-D remote sensing of individual trees. , 2003, Environmental science & technology.

[13]  J. Holmgren,et al.  Estimation of Tree Height and Stem Volume on Plots Using Airborne Laser Scanning , 2003, Forest Science.

[14]  M. Flood,et al.  LiDAR remote sensing of forest structure , 2003 .

[15]  Malik Beshir Malik,et al.  Applied Linear Regression , 2005, Technometrics.

[16]  Håkan Olsson,et al.  Simulating the effects of lidar scanning angle for estimation of mean tree height and canopy closure , 2003 .

[17]  S. Magnussen,et al.  Derivations of stand heights from airborne laser scanner data with canopy-based quantile estimators , 1998 .

[18]  J. Hyyppä,et al.  DETECTING AND ESTIMATING ATTRIBUTES FOR SINGLE TREES USING LASER SCANNER , 2006 .

[19]  Steen Magnussen,et al.  Recovering Tree Heights from Airborne Laser Scanner Data , 1999, Forest Science.

[20]  E. Næsset.  Predicting forest stand characteristics with airborne scanning laser using a practical two-stage procedure and field data , 2002 .

[21]  E. Næsset.  Estimating timber volume of forest stands using airborne laser scanner data , 1997 .

[22]  Emmanuel P. Baltsavias,et al.  Airborne laser scanning: existing systems and firms and other resources , 1999 .

[23]  J. Means,et al.  Predicting forest stand characteristics with airborne scanning lidar , 2000 .

[24]  Stephen Taylor,et al.  Regression Analysis with Applications , 1987 .

[25]  J. Hyyppä,et al.  Estimation of timber volume and stem density based on scanning laser altimetry and expected tree size distribution functions , 2004 .

[26]  Maria A. Brovelli,et al.  LIDAR Data Filtering and DTM Interpolation Within GRASS , 2004, Trans. GIS.

[27]  S. Roberts,et al.  Influence of Fusing Lidar and Multispectral Imagery on Remotely Sensed Estimates of Stand Density and Mean Tree Height in a Managed Loblolly Pine Plantation , 2003, Forest Science.