Optimization for maximizing the impact-resistance of patch repaired CFRP laminates using a surrogate-based model
暂无分享,去创建一个
Liang Meng | Mohamed Rachik | Yuliang Hou | Cheng Li | Ying Tie | L. Meng | Y. Tie | M. Rachik | Thaneshan Sapanathan | Yuliang Hou | Cheng Li | T. Sapanathan
[1] M. Belhouari,et al. Optimisation of the sizes of bonded composite repair in aircraft structures , 2012 .
[2] Weihong Zhang,et al. Predicting the low-velocity impact behavior of polycarbonate: Influence of thermal history during injection molding , 2015 .
[3] M. Ramji,et al. Design of optimum patch shape and size for bonded repair on damaged Carbon fibre reinforced polymer panels , 2014 .
[4] Three dimensional stress analysis of a composite patch using stress functions , 2010 .
[5] B. Liu,et al. The impact damage and residual load capacity of composite stepped bonding repairs and joints , 2019, Composites Part B: Engineering.
[6] B. Liu,et al. Thermosetting CFRP interlaminar toughening with multi-layers graphene and MWCNTs under mode I fracture , 2019, Composites Science and Technology.
[7] C. Santulli,et al. Compression after impact strength of repaired GFRP composite laminates under repeated impact loading , 2015 .
[8] F. L. Matthews,et al. Adhesively-bonded repairs to fibre-composite materials II. Finite element modelling , 1998 .
[9] Jie Zhang,et al. Effects of stacking sequence and rotation angle of patch on low velocity impact performance of scarf repaired laminates , 2018 .
[10] Hyunbum Park,et al. A study on low velocity impact damage evaluation and repair technique of small aircraft composite structure , 2011 .
[11] S. Sanchez-Saez,et al. Experimental study of the impact behavior of repaired thin laminates with double composite patch , 2018, Mechanics of Advanced Materials and Structures.
[12] M. Uyaner,et al. Repairing impact damaged fiber reinforced composite pipes by external wrapping with composite patches , 2015 .
[13] Mohamed Rachik,et al. Parameter identifiability of ductile fracture criterion for DP steels using bi-level reduced surrogate model , 2019, Engineering Failure Analysis.
[14] A. Megueni,et al. Optimisation of composite patches repairs with the design of experiments method , 2009 .
[15] F. L. Matthews,et al. Adhesively-bonded repairs to fibre-composite materials I. Experimental , 1998 .
[16] Constantinos Soutis,et al. Strength prediction of patch-repaired CFRP laminates loaded in compression , 2000 .
[17] Bijan Mohammadi,et al. Mixed-mode fracture analysis of aluminium repaired panels using composite patches , 2006 .
[18] Jihong Zhu,et al. From Topology Optimization Design to Additive Manufacturing: Today’s Success and Tomorrow’s Roadmap , 2020, Archives of Computational Methods in Engineering.
[19] P. Breitkopf,et al. On the study of mystical materials identified by indentation on power law and Voce hardening solids , 2018, International Journal of Material Forming.
[20] A. Arockiarajan,et al. The role of adhesively bonded super hybrid external patches on the impact and post-impact response of repaired glass/epoxy composite laminates , 2018 .
[21] Weihong Zhang,et al. Numerical material representation using proper orthogonal decomposition and diffuse approximation , 2013, Appl. Math. Comput..
[22] G. Balaganesan,et al. Energy absorption of repaired composite laminates subjected to impact loading , 2016 .
[23] M. Pavier,et al. The effect of delamination geometry on the compressive failure of composite laminates , 2001 .
[24] M. Ramji,et al. Towards optimization of patch shape on the performance of bonded composite repair using FEM , 2013 .
[25] T. Sapanathan,et al. A novel development of bi-level reduced surrogate model to predict ductile fracture behaviors , 2017 .
[26] S. K. Malhotra,et al. Residual strength and fatigue life assessment of composite patch repaired specimens , 1999 .
[27] P. Breitkopf,et al. Multiscale structural topology optimization with an approximate constitutive model for local material microstructure , 2015 .
[28] L. Meng,et al. On the damage mechanism of high-speed ballast impact and compression after impact for CFRP laminates , 2019 .
[29] Meng Zhang,et al. Investigation into contributions of static and dynamic loads to compressive residual stress fields caused by ultrasonic surface rolling , 2019, International Journal of Mechanical Sciences.
[30] Marc Alexa,et al. Computing and Rendering Point Set Surfaces , 2003, IEEE Trans. Vis. Comput. Graph..
[31] Mohamed Rachik,et al. Low-velocity impact behaviors of repaired CFRP laminates: Effect of impact location and external patch configurations , 2019, Composites Part B: Engineering.
[32] J. Ferreira,et al. Effects of external patch configuration on repaired composite laminates subjected to multi-impacts , 2017 .
[33] Jun Liu,et al. A sequential constraints updating approach for Kriging surrogate model-assisted engineering optimization design problem , 2019, Engineering with Computers.
[34] Mohamed Rachik,et al. An insight into the low-velocity impact behavior of patch-repaired CFRP laminates using numerical and experimental approaches , 2018 .
[35] J. Gonçalves,et al. Characterisation of composite bonded single-strap repairs under fatigue loading , 2015 .
[36] Tielin Shi,et al. Topology optimization of hierarchical lattice structures with substructuring , 2019, Computer Methods in Applied Mechanics and Engineering.
[37] Jaehun Lee,et al. Bending analysis of a laminated composite patch considering the free-edge effect using a stress-based equivalent single-layer composite model , 2011 .
[38] Saeed Ziaei-Rad,et al. Repair of a cracked Timoshenko beam subjected to a moving mass using piezoelectric patches , 2010 .