A promising alternative solvent of perovskite to induce rapid crystallization for high-efficiency photovoltaic devices

As solar cell structures based on planar heterojunctions have already demonstrated very impressive advances in cost-effectiveness and performance, many different solvents are being developed and gradually adopted for high-performance inorganic–organic hybrid perovskite solar cells. Here, we introduce a simple planar cell configuration with layers prepared in a fully solution-based process, in which dimethylacetamide (DMAC) serves as an effective precursor solvent that is comparable with N,N-dimethylformamide (DMF). The use of DMAC leads to a smooth and dense perovskite film via one-step deposition, whose ideal morphology enables solar cells to obtain a high power-conversion efficiency of 15.12%. We also studied the effect of different solvents through a computation of the stabilization energy between PbI2, CH3NH3I, and solvent molecules. These results offer insight into the promising directions for the development of solvent engineering.

[1]  Kun Zhang,et al.  Retarding the crystallization of PbI2 for highly reproducible planar-structured perovskite solar cells via sequential deposition , 2014 .

[2]  Namchul Cho,et al.  Enhanced Environmental Stability of Planar Heterojunction Perovskite Solar Cells Based on Blade‐Coating , 2015 .

[3]  Sang Il Seok,et al.  Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells. , 2014, Nature materials.

[4]  Jeffrey A. Christians,et al.  An inorganic hole conductor for organo-lead halide perovskite solar cells. Improved hole conductivity with copper iodide. , 2014, Journal of the American Chemical Society.

[5]  J. Teuscher,et al.  Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites , 2012, Science.

[6]  Nripan Mathews,et al.  Flexible, low-temperature, solution processed ZnO-based perovskite solid state solar cells. , 2013, Chemical communications.

[7]  Leone Spiccia,et al.  Gas-assisted preparation of lead iodide perovskite films consisting of a monolayer of single crystalline grains for high efficiency planar solar cells , 2014 .

[8]  A. Jen,et al.  High‐Performance Planar‐Heterojunction Solar Cells Based on Ternary Halide Large‐Band‐Gap Perovskites , 2015 .

[9]  Qi Chen,et al.  Planar heterojunction perovskite solar cells via vapor-assisted solution process. , 2014, Journal of the American Chemical Society.

[10]  Yang Yang,et al.  Interface engineering of highly efficient perovskite solar cells , 2014, Science.

[11]  A. Jen,et al.  The roles of alkyl halide additives in enhancing perovskite solar cell performance , 2015 .

[12]  Konrad Wojciechowski,et al.  A one-step low temperature processing route for organolead halide perovskite solar cells. , 2013, Chemical communications.

[13]  Jin Young Kim,et al.  Mixed solvents for the optimization of morphology in solution-processed, inverted-type perovskite/fullerene hybrid solar cells. , 2014, Nanoscale.

[14]  Yong Qiu,et al.  Study on the stability of CH3NH3PbI3films and the effect of post-modification by aluminum oxide in all-solid-state hybrid solar cells , 2014 .

[15]  Nam-Gyu Park,et al.  Organolead Halide Perovskite: New Horizons in Solar Cell Research , 2014 .

[16]  Henry J. Snaith,et al.  Efficient planar heterojunction perovskite solar cells by vapour deposition , 2013, Nature.

[17]  Ningyi Yuan,et al.  The effect of ALD-Zno layers on the formation of CH₃NH₃PbI₃ with different perovskite precursors and sintering temperatures. , 2014, Chemical communications.

[18]  Kai Zhu,et al.  CH3NH3Cl-Assisted One-Step Solution Growth of CH3NH3PbI3: Structure, Charge-Carrier Dynamics, and Photovoltaic Properties of Perovskite Solar Cells , 2014 .

[19]  Jing Xu,et al.  Impressive enhancement in the cell performance of ZnO nanorod-based perovskite solar cells with Al-doped ZnO interfacial modification. , 2014, Chemical communications.

[20]  Xiang Fang,et al.  Improvement of the humidity stability of organic–inorganic perovskite solar cells using ultrathin Al2O3 layers prepared by atomic layer deposition , 2015 .

[21]  Yaoguang Rong,et al.  Hole-Conductor-Free Mesoscopic TiO2/CH3NH3PbI3 Heterojunction Solar Cells Based on Anatase Nanosheets and Carbon Counter Electrodes. , 2014, The journal of physical chemistry letters.

[22]  M. Green,et al.  The emergence of perovskite solar cells , 2014, Nature Photonics.

[23]  Dinghan Shen,et al.  Understanding the solvent-assisted crystallization mechanism inherent in efficient organic–inorganic halide perovskite solar cells , 2014 .

[24]  Peng Gao,et al.  Effect of Annealing Temperature on Film Morphology of Organic–Inorganic Hybrid Pervoskite Solid‐State Solar Cells , 2014 .