Breaking phase focused wave group loads on offshore wind turbine monopiles

The current method for calculating extreme wave loads on offshore wind turbine structures is based on engineering models for non-breaking regular waves. The present article has the aim of validating previously developed models at DTU, namely the OceanWave3D potential flow wave model and a coupled OceanWave3D-OpenFOAM solver, against measurements of focused wave group impacts on a monopile. The focused 2D and 3D wave groups are reproduced and the free surface elevation and the in-line forces are compared to the experimental results. In addition, the pressure distribution on the monopile is examined at the time of maximum force and discussed in terms of shape and magnitude. Relative pressure time series are also compared between the simulations and experiments and detailed pressure fields for a 2D and 3D impact are discussed in terms of impact type. In general a good match for free surface elevation, in-line force and wave-induced pressures is found.

[1]  C. W. Hirt,et al.  Volume of fluid (VOF) method for the dynamics of free boundaries , 1981 .

[2]  Henrik Bredmose,et al.  Extreme wave forces and wave run-up on offshore wind- turbine foundations , 2005 .

[3]  Henrik Bredmose,et al.  Vertical Wave Impacts on Offshore Wind Turbine Inspection Platforms , 2011 .

[4]  Robert M. Sorensen,et al.  Basic Coastal Engineering , 1978 .

[5]  Torsten Schlurmann,et al.  BREAKING WAVE KINEMATICS, LOCAL PRESSURES, AND FORCES ON A TRIPOD STRUCTURE , 2012 .

[6]  Jørgen Fredsøe,et al.  A wave generation toolbox for the open‐source CFD library: OpenFoam® , 2012 .

[7]  Y. Goda.  Reanalysis of Regular and Random Breaking Wave Statistics , 2010 .

[8]  Henrik Bredmose,et al.  Numerical Reproduction of Extreme Wave Loads on a Gravity Wind Turbine Foundation , 2006 .

[9]  Yi Guo,et al.  Analytical Formulation for Sizing and Estimating the Dimensions and Weight of Wind Turbine Hub and Drivetrain Components , 2015 .

[10]  Amir Etemad-Shahidi,et al.  Applied Ocean Research , 2022 .

[11]  Maureen Hand,et al.  Applications of Systems Engineering to the Research, Design, and Development of Wind Energy Systems , 2011 .

[12]  S.,et al.  DeRisk — Accurate prediction of ULS wave loads. Outlook and first results , 2016 .

[13]  Henrik Bredmose,et al.  Breaking wave impacts on offshore wind turbine foundations: Focused wave groups and CFD , 2010 .

[14]  Bo Terp Paulsen,et al.  An efficient domain decomposition strategy for wave loads on surface piercing circular cylinders , 2014 .

[15]  Morten Huseby,et al.  Higher-harmonic wave forces and ringing of vertical cylinders , 2002 .

[16]  Shaofeng Wang,et al.  DeRisk - Accurate prediction of ULS wave loads. Outlook and first results , 2016 .

[17]  Rick Damiani,et al.  Objectives and Constraints for Wind Turbine Optimization , 2014 .

[18]  Janou Hennig,et al.  Systematically Varied Rogue Wave Sequences for the Experimental Investigation of Extreme Structure Behavior , 2006 .

[19]  H. Bredmose,et al.  Forcing of a bottom-mounted circular cylinder by steep regular water waves at finite depth , 2014, Journal of Fluid Mechanics.

[20]  Harry B. Bingham,et al.  An efficient flexible-order model for 3D nonlinear water waves , 2009, J. Comput. Phys..

[21]  R. Dean.  Stream function representation of nonlinear ocean waves , 1965 .