Image-Based System for Measuring Objects on an Oblique Plane and Its Applications in 2-D Localization

This paper presents an image-based framework for measuring target objects on an oblique plane by using a single charge-coupled device camera and two laser projectors mounted in parallel beside the camera. Because of the alignment of the laser beams, which form in parallel with the optical axis of the camera, laser-projected spots in the image can be processed to establish relationships between distance and pixel counts of the projected spots in the image. Based on simple geometrical derivations without complex image processing, the proposed approach can successfully measure the photographic distance, the distance between two arbitrary points on the oblique surface, and the incline angle of the oblique surface. Thanks to its ranging capability, the proposed image-based measuring system is further applied to localize objects on a ground surface in addition to depth measurement. To demonstrate the feasibility of the proposed approach for practical applications, we propose a surveillance framework under which a pan-tilt-zoom camera tracks objects in an environment according to the 2-D localization results obtained via the proposed method. Experimental results have demonstrated the effectiveness of the proposed approach in distance measurement, as well as localization of objects on an oblique plane.

[1]  Peter Meer,et al.  Point matching under large image deformations and illumination changes , 2004, IEEE Transactions on Pattern Analysis and Machine Intelligence.

[2]  A. Carullo,et al.  An ultrasonic sensor for distance measurement in automotive applications , 2001, IEEE Sensors Journal.

[3]  YanHong.  Image Analysis for Digital Media Applications , 2001 .

[4]  Jun-Wei Hsieh,et al.  Fast stitching algorithm for moving object detection and mosaic construction , 2003, 2003 International Conference on Multimedia and Expo. ICME '03. Proceedings (Cat. No.03TH8698).

[5]  Wen-Chung Kao,et al.  Design of signal processing pipeline for stereoscopic cameras , 2010, IEEE Transactions on Consumer Electronics.

[6]  Chen-Chien James Hsu,et al.  Liquid-level measurement using a single digital camera , 2009 .

[7]  Wei-Yen Wang,et al.  Three-dimensional measurement of distant objects based on laser-projected CCD images , 2009 .

[8]  Wei-Yen Wang,et al.  Nighttime Vehicle Distance Measuring Systems , 2007, IEEE Transactions on Circuits and Systems II: Express Briefs.

[9]  Takeo Kanade,et al.  Stereo by Intra- and Inter-Scanline Search Using Dynamic Programming , 1985, IEEE Transactions on Pattern Analysis and Machine Intelligence.

[10]  Basil G. Mertzios,et al.  Applications of coordinate logic filters in image analysis and pattern recognition , 2001, ISPA 2001. Proceedings of the 2nd International Symposium on Image and Signal Processing and Analysis. In conjunction with 23rd International Conference on Information Technology Interfaces (IEEE Cat..

[11]  K. Osugi,et al.  Development of the scanning laser radar for acc system , 1999 .

[12]  E. R. Cohen.  An Introduction to Error Analysis: The Study of Uncertainties in Physical Measurements , 1998 .

[13]  Chen-Chien Hsu,et al.  Distance and angle measurement of distant objects on an oblique plane based on pixel variation of CCD image , 2010, 2010 IEEE Instrumentation & Measurement Technology Conference Proceedings.

[14]  Mark D. Semon,et al.  POSTUSE REVIEW: An Introduction to Error Analysis: The Study of Uncertainties in Physical Measurements , 1982 .

[15]  Ming-Chih Lu,et al.  Image-based distance and area measuring systems , 2006, IEEE Sensors Journal.

[16]  Chen-Chien Hsu,et al.  Distance measurement based on pixel variation of CCD images. , 2009, ISA transactions.

[17]  P. McKerrow,et al.  Classifying Surface Roughness With CTFM Ultrasonic Sensing , 2006, IEEE Sensors Journal.

[18]  Dae-Woon Lim,et al.  Automated detection of all kinds of violations at a street intersection using real time individual vehicle tracking , 2002, Proceedings Fifth IEEE Southwest Symposium on Image Analysis and Interpretation.

[19]  J.A.B. Neves,et al.  Angle Invariance for Distance Measurements Using a Single Camera , 2006, 2006 IEEE International Symposium on Industrial Electronics.

[20]  H. Zangl,et al.  Combined Capacitive and Ultrasonic Distance Measurement for Automotive Applications , 2011, IEEE Sensors Journal.

[21]  Hyongsuk Kim,et al.  Distance Measurement Using a Single Camera with a Rotating Mirror , 2005 .

[22]  Takeo Kanade,et al.  Development of a video-rate stereo machine , 1995, Proceedings 1995 IEEE/RSJ International Conference on Intelligent Robots and Systems. Human Robot Interaction and Cooperative Robots.

[23]  M. Michalski,et al.  Distance Estimation With a Long-Range Ultrasonic Sensor System , 2009, IEEE Sensors Journal.

[24]  Sei-Wang Chen,et al.  Integration of Omnidirectional and Movable Cameras for Indoor Surveillance , 2004 .

[25]  Richard I. Hartley,et al.  In Defense of the Eight-Point Algorithm , 1997, IEEE Trans. Pattern Anal. Mach. Intell..

[26]  S. Tsuji,et al.  Noncontact Material Identification and Distance Measurement Using Effective Capacitance With CdS Cells , 2007, IEEE Sensors Journal.

[27]  Hongyu Di,et al.  A virtual binocular vision range finding method of remote object based on single rotating angle indexing camera , 2009, 2009 9th International Conference on Electronic Measurement & Instruments.

[28]  J.C.A. Fernandes,et al.  Using Conical and Spherical Mirrors with Conventional Cameras for 360° Panorama Views in a Single Image , 2006, 2006 IEEE International Conference on Mechatronics.