R134a, R1234ze(E), R245fa and R1233zd(E) in a plate heat exchanger

[1]  Vincent Lemort,et al.  An experimental analysis of flow boiling and pressure drop in a brazed plate heat exchanger for organic Rankine cycle power systems , 2017 .

[2]  Fredrik Haglind,et al.  Flow boiling heat transfer and pressure drop characteristics of R134a, R1234yf and R1234ze in a plate heat exchanger for organic Rankine cycle units , 2017 .

[3]  Dominik Meinel,et al.  Innovative CHP concept for ORC and its benefit compared to conventional concepts , 2016 .

[4]  L. Tadrist,et al.  Analysis of enhanced vapor desuperheating during condensation inside a plate heat exchanger , 2016 .

[5]  Markus Preißinger,et al.  HFOs as substitute for R-134a as working fluids in ORC power plants: A thermodynamic assessment and thermal stability analysis , 2016 .

[6]  G. Nellis,et al.  Two-Phase Heat Transfer and Pressure Drop , 2016 .

[7]  L. Tadrist,et al.  Local vs global heat transfer and flow analysis of hydrocarbon complete condensation in plate heat exchanger based on infrared thermography , 2015 .

[8]  Chieko Kondou,et al.  Thermodynamic assessment of high-temperature heat pumps using low-GWP HFO refrigerants for heat recovery , 2015 .

[9]  Claudio Zilio,et al.  A new computational procedure for refrigerant condensation inside herringbone-type Brazed Plate Heat Exchangers , 2015 .

[10]  Wei Liu,et al.  Investigation of hydrofluoroolefins as potential working fluids in organic Rankine cycle for geothermal power generation , 2014 .

[11]  Li Zhao,et al.  A review of working fluid and expander selections for organic Rankine cycle , 2013 .

[12]  Vincent Lemort,et al.  Techno-economic survey of Organic Rankine Cycle (ORC) systems , 2013 .

[13]  D. D. Col,et al.  Condensation of superheated vapour of R410A and R407C inside plate heat exchangers: Experimental results and simulation procedure , 2012 .

[14]  Davide Del Col,et al.  R32 partial condensation inside a brazed plate heat exchanger , 2012 .

[15]  G. Longo,et al.  Condensation of the low GWP refrigerant HFC152a inside a Brazed Plate Heat Exchanger , 2012 .

[16]  Tariq S. Khan,et al.  Experimental investigation of evaporation heat transfer and pressure drop of ammonia in a 60° chevron plate heat exchanger , 2012 .

[17]  D. D. Col,et al.  Partial condensation of R407C and R410A refrigerants inside a plate heat exchanger , 2012 .

[18]  G. Longo.  The effect of vapour super-heating on hydrocarbon refrigerant condensation inside a brazed plate heat exchanger , 2011 .

[19]  A. Cavallini,et al.  Effect of cross sectional shape during condensation in a single square minichannel , 2011 .

[20]  Damir Dović,et al.  Generalized correlations for predicting heat transfer and pressure drop in plate heat exchanger channels of arbitrary geometry , 2009 .

[21]  Giovanni A. Longo,et al.  R410A condensation inside a commercial brazed plate heat exchanger , 2009 .

[22]  Jonathan Rose,et al.  A Theory of Film Condensation in Horizontal Noncircular Section Microchannels , 2005 .

[23]  Reinhard Würfel,et al.  Experimental investigations of heat transfer and pressure drop during the condensation process within plate heat exchangers of the herringbone-type☆ , 2004 .

[24]  Anthony M. Jacobi,et al.  MODIFIED WILSON-PLOT TECHNIQUE FOR HEAT EXCHANGER PERFORMANCE: STRATEGIES FOR MINIMIZING UNCERTAINTY IN DATA REDUCTION , 2004 .

[25]  Y. Hsieh,et al.  Evaporation Heat Transfer and Pressure Drop of Refrigerant R-410A Flow in a Vertical Plate Heat Exchanger , 2003 .

[26]  Z. Ayub.  Plate Heat Exchanger Literature Survey and New Heat Transfer and Pressure Drop Correlations for Refrigerant Evaporators , 2003 .

[27]  K. S. Lee,et al.  The characteristics of condensation in brazed plate heat exchangers with different chevron angles , 2003 .

[28]  A. Bontemps,et al.  Condensation of Pure and Mixture of Hydrocarbons in a Compact Heat Exchanger: Experiments and Modelling , 2002 .

[29]  A. F. Mills.  Convective Condensation of Superheated Vapor , 1998 .

[30]  H. Martin.  A theoretical approach to predict the performance of chevron-type plate heat exchangers , 1996 .

[31]  Ramesh K. Shah.  ASSESSMENT OF MODIFIED WILSON PLOT TECHNIQUES FOR OBTAINING HEAT EXCHANGER DESIGN DATA , 1990 .

[32]  W. Focke,et al.  The effect of the corrugation inclination angle on the thermohydraulic performance of plate heat exchangers , 1985 .

[33]  A. M. Judd.  Convective Boiling and Condensation. , 1973 .

[34]  W. Akers,et al.  CONDENSING HEAT TRANSFER WITHIN HORIZONTAL TUBES , 1955 .

[35]  S. J. Kline,et al.  Describing Uncertainties in Single-Sample Experiments , 1953 .