Fuzzy-based linear motion control of a non-contacting steel plate conveyance system

For stabilizing the steel plate conveyance process, feasibilities of incorporating the linear induction motor scheme to provide the desired normal and propulsive forces have been intensively proposed. With proper optical measurement system installation and electromagnetic force estimations, those gaps among the steel plate and the stator poles can be continuously evaluated and adjusted. Based on such schemes and proper stationary reference frame transformations, this paper has successfully designed and implemented the closed-loop motion control strategy with fuzzy inference process to achieve the desired steel mill non-contacting conveyance system objectives.

[1]  Ahmed El Hajjaji,et al.  Modeling and nonlinear control of magnetic levitation systems , 2001, IEEE Trans. Ind. Electron..

[2]  Dinkar Prasad,et al.  Controller Design for Large-Gap Control of Electromagnetically Levitated System by Using an Optimization Technique , 2008, IEEE Transactions on Control Systems Technology.

[3]  H. Ohsaki,et al.  A combined lift and propulsion system of a steel plate by transverse flux linear induction motors , 1999, IEEE International Magnetics Conference.

[4]  Cheng-Tsung Liu,et al.  Applications of digital image processing technique for steel mill non-contacting conveyance system operations , 2004, Conference Record of the 2004 IEEE Industry Applications Conference, 2004. 39th IAS Annual Meeting..

[5]  Cheng-Tsung Liu,et al.  Flux modeling and analysis of a linear induction motor for steel mill non-contacting conveyance system application , 2005 .

[6]  Damrongrit Piyabongkarn,et al.  Development of a real-time digital control system with a hardware-in-the-loop magnetic levitation device for reinforcement of controls education , 2003, IEEE Trans. Educ..

[7]  Eisuke Masada,et al.  Magnetic levitation of a flexible steel plate with a vibration suppressing magnet , 1996 .

[8]  Cheng-Tsung Liu,et al.  Closed-loop electromagnetic forces calculations and controls of a noncontacting industrial steel plate conveyance system , 2006, IEEE Transactions on Magnetics.

[9]  Cheng-Tsung Liu,et al.  Analytical model development of an eddy-current-based non-contacting steel plate conveyance system , 2008 .

[10]  Cheng-Tsung Liu,et al.  Electromagnetic field and force analyses of a non-contacting conveyance system for steel mill application , 2002 .

[11]  Cheng-Tsung Liu,et al.  Development of an Automatic On-line Gap Detection Scheme for Levitated Industrial Steel Plate Conveyance System , 2006, Conference Record of the 2006 IEEE Industry Applications Conference Forty-First IAS Annual Meeting.

[12]  Toshiko Nakagawa,et al.  Study of magnetic levitation technique applied to steel plate production line , 2000 .

[13]  Keisuke Fujisaki.  Application of electromagnetic force to run out table , 2000, Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No.00CH37129).

[14]  Eisuke Masada,et al.  A novel combined lift and propulsion system for a steel plate conveyance by electromagnets , 1998 .