Numerical investigation on combined multiple shell-pass shell-and-tube heat exchanger with continuous helical baffles

A combined multiple shell-pass shell-and-tube heat exchanger (CMSP-STHX) with continuous helical baffles in outer shell pass has been invented to improve the heat transfer performance and simplify the manufacture process. The CMSP-STHX is compared with the conventional shell-and-tube heat exchanger with segmental baffles (SG-STHX) by means of computational fluid dynamics (CFD) method. The numerical results show that, under the same mass flow rate M and overall heat transfer rate Qm, the average overall pressure drop Δpm of the CMSP-STHX is lower than that of conventional SG-STHX by 13% on average. Under the same overall pressure drop Δpm in the shell side, the overall heat transfer rate Qm of the CMSP-STHX is nearly 5.6% higher than that of SG-STHX and the mass flow rate in the CMSP-STHX is about 6.6% higher than that in the SG-STHX. The CMSP-STHX might be used to replace the SG-STHX in industrial applications to save energy, reduce cost and prolong the service life.

[1]  H. Li,et al.  Analysis of local shellside heat and mass transfer in the shell-and-tube heat exchanger with disc-and-doughnut baffles , 1999 .

[2]  Gongnan Xie,et al.  An experimental study of shell-and-tube heat exchangers with continuous helical baffles , 2007 .

[3]  Malcolm J. Andrews,et al.  Three-Dimensional Modeling of a Helixchanger® Heat Exchanger Using CFD , 2005 .

[4]  Petr Stehlík,et al.  Different Strategies to Improve Industrial Heat Exchange , 2002 .

[5]  Petr Stehlík,et al.  Most Frequently Used Heat Exchangers from Pioneering Research to Worldwide Applications , 2006 .

[6]  Petr Stehlík,et al.  Comparison of correction factors for shell-and-tube heat exchangers with segmental or helical baffles , 1994 .

[7]  K. S. Chunangad,et al.  Fouling Mitigation Using Helixchanger Heat Exchangers , 2003 .

[8]  V. Kottke,et al.  Visualization and determination of local heat transfer coefficients in shell-and-tube heat exchangers for staggered tube arrangement by mass transfer measurements , 1998 .

[9]  V. Kottke,et al.  Effect of the leakage on pressure drop and local heat transfer in shell-and-tube heat exchangers for staggered tube arrangement , 1998 .

[10]  Fang Xiaoming,et al.  Experimental study on heat transfer enhancement of a helically baffled heat exchanger combined with three-dimensional finned tubes , 2004 .

[11]  Gongnan Xie,et al.  Experimental Study and Genetic-Algorithm-Based Correlation on Shell-Side Heat Transfer and Flow Performance of Three Different Types of Shell-and-Tube Heat Exchangers , 2007 .

[12]  T. Shih,et al.  A New K-epsilon Eddy Viscosity Model for High Reynolds Number Turbulent Flows: Model Development and Validation , 1994 .

[13]  Petr Stehlík,et al.  Helical Baffles in Shell-and-Tube Heat Exchangers, Part I: Experimental Verification , 1996 .

[14]  G. Xie,et al.  Prediction of heat transfer rates for shell-and-tube heat exchangers by artificial neural networks approach , 2006 .

[15]  Qiuwang Wang,et al.  Heat transfer analysis for shell-and-tube heat exchangers with experimental data by artificial neural networks approach , 2007 .

[16]  T. Shih,et al.  A new k-ϵ eddy viscosity model for high reynolds number turbulent flows , 1995 .