Parametric investigation of working fluids for organic Rankine cycle applications

Abstract This paper investigates working fluids for organic Rankine cycle (ORC) applications with a goal of identifying “ideal” working fluids for five renewable/alternative energy sources. It employs a methodology for screening and comparing with good engineering accuracy the thermodynamic performance potential of ORC operating with working fluids that are not well characterized experimentally or by high-accuracy equations of state. A wide range of “theoretical” working fluids are investigated with the goals to identify potential alternative working fluids and to guide future research and development efforts of working fluids. The “theoretical” working fluids investigated are described in terms of critical state properties, acentric factor, and ideal gas specific heat capacity at constant pressure and are obtained by parametrically varying each of these parameters. The performances of these “theoretical” working fluids are compared to the performances of several “real” working fluids. The study suggests a working fluid's critical temperature and its critical ideal gas molar heat capacity have the largest impact on the cycle efficiency and volumetric work output, with “ideal” working fluids for high efficiency possessing critical temperatures on the order of 100%–150% of the source temperature and possessing intermediate values of critical ideal gas molar heat capacity.

[1]  J. Wojtusiak,et al.  A thermodynamic analysis of refrigerants: Performance limits of the vapor compression cycle , 2014 .

[2]  Piotr A. Domanski,et al.  A thermodynamic analysis of refrigerants: Possibilities and tradeoffs for Low-GWP refrigerants ☆ , 2014 .

[3]  Andreas Schuster,et al.  Energetic and economic investigation of Organic Rankine Cycle applications , 2009 .

[4]  Li Zhao,et al.  A review of working fluid and expander selections for organic Rankine cycle , 2013 .

[5]  André Bardow,et al.  Computer-aided molecular design in the continuous-molecular targeting framework using group-contribution PC-SAFT , 2015, Comput. Chem. Eng..

[6]  Patrick Linke,et al.  Toward Optimum Working Fluid Mixtures for Organic Rankine Cycles using Molecular Design and Sensitivity Analysis , 2013 .

[7]  André Bardow,et al.  Simultaneous Optimization of Working Fluid and Process for Organic Rankine Cycles Using PC-SAFT , 2014 .

[8]  Per Lundqvist,et al.  A comparative study of the carbon dioxide transcritical power cycle compared with an organic rankine cycle with R123 as working fluid in waste heat recovery , 2006 .

[9]  Riccardo Brignoli,et al.  Organic Rankine cycle model for well-described and not-so-well-described working fluids , 2015 .

[10]  D. Brüggemann,et al.  Exergy based fluid selection for a geothermal Organic Rankine Cycle for combined heat and power generation , 2010 .

[11]  Antonio Flores-Tlacuahuac,et al.  Optimal molecular design of working fluids for sustainable low-temperature energy recovery , 2015, Comput. Chem. Eng..

[12]  V. Maizza,et al.  Unconventional working fluids in organic Rankine-cycles for waste energy recovery systems , 2001 .

[13]  Olav Bolland,et al.  Working fluids for low-temperature heat source , 2010 .

[14]  Antonio Flores-Tlacuahuac,et al.  Simultaneous Optimal Design of Organic Mixtures and Rankine Cycles for Low-Temperature Energy Recovery , 2015 .

[15]  Riccardo Brignoli,et al.  Methodology for estimating thermodynamic parameters and performance of working fluids for organic Rankine cycles , 2014 .

[16]  J. Steven Brown,et al.  Preliminary Selection of R-114 Replacement Refrigerants Using Fundamental Thermodynamic Parameters (RP-1308) , 2007 .

[17]  R. Reid,et al.  The Properties of Gases and Liquids , 1977 .

[18]  Ulli Drescher,et al.  Fluid selection for the Organic Rankine Cycle (ORC) in biomass power and heat plants , 2007 .

[19]  J. Steven Brown,et al.  Predicting performance of refrigerants using the Peng–Robinson Equation of State , 2007 .

[20]  Patrick Linke,et al.  On the systematic design and selection of optimal working fluids for Organic Rankine Cycles , 2010 .

[21]  Vincent Lemort,et al.  Working fluid selection and operating maps for Organic Rankine Cycle expansion machines , 2012 .

[22]  N. Lai,et al.  Working fluids for high-temperature organic Rankine cycles , 2007 .

[23]  Vincent Lemort,et al.  Pure and Pseudo-pure Fluid Thermophysical Property Evaluation and the Open-Source Thermophysical Property Library CoolProp , 2014, Industrial & engineering chemistry research.

[24]  M. McLinden,et al.  NIST Standard Reference Database 23: Reference Fluid Thermodynamic and Transport Properties-REFPROP, Version 8.0 , 2007 .

[25]  Sotirios Karellas,et al.  Supercritical Fluid Parameters in Organic Rankine Cycle Applications , 2008 .