Robust state estimation of feeding-blending systems in continuous pharmaceutical manufacturing.

Abstract State estimation is a fundamental part of monitoring, control, and real-time optimization in continuous pharmaceutical manufacturing. For nonlinear dynamic systems with hard constraints, moving horizon estimation (MHE) can estimate the current state by solving a well-defined optimization problem where process complexities are explicitly considered as constraints. Traditional MHE techniques assume random measurement noise governed by some normal distributions. However, state estimates can be unreliable if noise is not normally distributed or measurements are contaminated with gross or systematic errors. To improve the accuracy and robustness of state estimation, we incorporate robust estimators within the standard MHE skeleton, leading to an extended MHE framework. The proposed MHE approach is implemented on two pharmaceutical continuous feeding–blending system (FBS) configurations which include loss-in-weight (LIW) feeders and continuous blenders. Numerical results show that our MHE approach is robust to gross errors and can provide reliable state estimates when measurements are contaminated with outliers and drifts. Moreover, the efficient solution of the MHE realized in this work, suggests feasible application of on-line state estimation on more complex continuous pharmaceutical processes.

[1]  David Q. Mayne,et al.  Constrained state estimation for nonlinear discrete-time systems: stability and moving horizon approximations , 2003, IEEE Trans. Autom. Control..

[2]  R. Fair.  On the Robust Estimation of Econometric Models , 1974 .

[3]  Fernando J. Muzzio,et al.  Characterizing continuous powder mixing using residence time distribution , 2011 .

[4]  Rohit Ramachandran,et al.  A multi-dimensional population balance model approach to continuous powder mixing processes , 2013 .

[5]  Thomas Weinhart,et al.  Experiments and discrete element simulation of the dosing of cohesive powders in a simplified geometry , 2016 .

[6]  J. Dennis,et al.  Techniques for nonlinear least squares and robust regression , 1978 .

[7]  Lorenz T. Biegler,et al.  On-line state estimation of nonlinear dynamic systems with gross errors , 2014, Comput. Chem. Eng..

[8]  Thomas F. Edgar,et al.  A fast and versatile technique for constrained state estimation , 2011 .

[9]  Xueyu Chen,et al.  Optimal implementation of on-line optimization , 1998 .

[10]  L. Biegler,et al.  Redescending estimators for data reconciliation and parameter estimation , 2001 .

[11]  James B. Rawlings,et al.  Critical Evaluation of Extended Kalman Filtering and Moving-Horizon Estimation , 2005 .

[12]  Guoming Hu,et al.  Modeling and simulation of transportation system of screw conveyors by the Discrete Element Method , 2010, 2010 International Conference on Mechanic Automation and Control Engineering.

[13]  Daniel Sarabia,et al.  Gross error management in data reconciliation , 2015 .

[14]  John D. Hedengren,et al.  MOVING HORIZON ESTIMATION FOR AN INDUSTRIAL GAS PHASE POLYMERIZATION REACTOR , 2007 .

[15]  Raghunathan Rengaswamy,et al.  Recursive estimation in constrained nonlinear dynamical systems , 2005 .

[16]  Martin Horn,et al.  Optimized continuous pharmaceutical manufacturing via model-predictive control. , 2016, International journal of pharmaceutics.

[17]  Paul W. Cleary.  DEM modelling of particulate flow in a screw feeder Model description , 2007 .

[18]  Derya B. Özyurt,et al.  Theory and practice of simultaneous data reconciliation and gross error detection for chemical processes , 2004, Comput. Chem. Eng..

[19]  L. Biegler,et al.  Data reconciliation and gross‐error detection for dynamic systems , 1996 .

[20]  Vadim Mizonov,et al.  FLOW ANALYSIS AND MARKOV CHAIN MODELLING TO QUANTIFY THE AGITATION EFFECT IN A CONTINUOUS POWDER MIXER , 2006 .

[21]  George M. Siouris,et al.  Applied Optimal Control: Optimization, Estimation, and Control , 1979, IEEE Transactions on Systems, Man, and Cybernetics.

[22]  Diego Martinez Prata,et al.  Comparative analysis of robust estimators on nonlinear dynamic data reconciliation , 2008 .

[23]  P. Vachhani,et al.  Robust and reliable estimation via Unscented Recursive Nonlinear Dynamic Data Reconciliation , 2006 .

[24]  P. Houtekamer,et al.  Data Assimilation Using an Ensemble Kalman Filter Technique , 1998 .

[25]  Atul Dubey,et al.  Mathematical Development and Comparison of a Hybrid PBM-DEM Description of a Continuous Powder Mixing Process , 2013 .

[26]  Marianthi Ierapetritou,et al.  System-wide hybrid MPC-PID control of a continuous pharmaceutical tablet manufacturing process via direct compaction. , 2013, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

[27]  Marianthi G. Ierapetritou,et al.  Computational Approaches for Studying the Granular Dynamics of Continuous Blending Processes, 2 – Population Balance and Data‐Based Methods , 2012 .

[28]  Neil J. Gordon,et al.  A tutorial on particle filters for online nonlinear/non-Gaussian Bayesian tracking , 2002, IEEE Trans. Signal Process..

[29]  Lorenz T. Biegler,et al.  On the implementation of an interior-point filter line-search algorithm for large-scale nonlinear programming , 2006, Math. Program..

[30]  R. Maronna,et al.  Robust Estimators for Data Reconciliation , 2015 .

[31]  Hugh F. Durrant-Whyte,et al.  A new method for the nonlinear transformation of means and covariances in filters and estimators , 2000, IEEE Trans. Autom. Control..

[32]  Lloyd P. M. Johnston,et al.  Maximum likelihood data rectification: Steady-state systems , 1995 .

[33]  L. Biegler,et al.  Simultaneous strategies for data reconciliation and gross error detection of nonlinear systems , 1991 .

[34]  L. Biegler.  An overview of simultaneous strategies for dynamic optimization , 2007 .

[35]  Serge Domenech,et al.  Simulation and data validation in multistage flash desalination plants , 1998 .

[37]  Marianthi G. Ierapetritou,et al.  Computational Approaches for Studying the Granular Dynamics of Continuous Blending Processes, 1 – DEM Based Methods , 2011 .