A bi-articular model for scapular-humeral rhythm reconstruction through data from wearable sensors

BackgroundPatient-specific performance assessment of arm movements in daily life activities is fundamental for neurological rehabilitation therapy. In most applications, the shoulder movement is simplified through a socket-ball joint, neglecting the movement of the scapular-thoracic complex. This may lead to significant errors. We propose an innovative bi-articular model of the human shoulder for estimating the position of the hand in relation to the sternum. The model takes into account both the scapular-toracic and gleno-humeral movements and their ratio governed by the scapular-humeral rhythm, fusing the information of inertial and textile-based strain sensors.MethodTo feed the reconstruction algorithm based on the bi-articular model, an ad-hoc sensing shirt was developed. The shirt was equipped with two inertial measurement units (IMUs) and an integrated textile strain sensor. We built the bi-articular model starting from the data obtained in two planar movements (arm abduction and flexion in the sagittal plane) and analysing the error between the reference data - measured through an optical reference system - and the socket-ball approximation of the shoulder. The 3D model was developed by extending the behaviour of the kinematic chain revealed in the planar trajectories through a parameter identification that takes into account the body structure of the subject.ResultThe bi-articular model was evaluated in five subjects in comparison with the optical reference system. The errors were computed in terms of distance between the reference position of the trochlea (end-effector) and the correspondent model estimation. The introduced method remarkably improved the estimation of the position of the trochlea (and consequently the estimation of the hand position during reaching activities) reducing position errors from 11.5 cm to 1.8 cm.ConclusionThanks to the developed bi-articular model, we demonstrated a reliable estimation of the upper arm kinematics with a minimal sensing system suitable for daily life monitoring of recovery.

[1]  P. Veltink,et al.  Compensation of magnetic disturbances improves inertial and magnetic sensing of human body segment orientation , 2005, IEEE Transactions on Neural Systems and Rehabilitation Engineering.

[2]  D. Rossi,et al.  Piezoresistive Goniometer Network for Sensing Gloves , 2014 .

[3]  Hiroaki Tsutsui,et al.  The influence of handheld weight on the scapulohumeral rhythm. , 2008, Journal of shoulder and elbow surgery.

[4]  Tao Liu,et al.  Novel approach to ambulatory assessment of human segmental orientation on a wearable sensor system. , 2009, Journal of biomechanics.

[5]  H Harry Asada,et al.  Wearable Conductive Fiber Sensors for Multi-Axis Human Joint Angle Measurements , 2005, Journal of NeuroEngineering and Rehabilitation.

[6]  Danilo De Rossi,et al.  Wearable technology for biomechanics: e-textile or micromechanical sensors? [Conversations in BME] , 2010, IEEE Engineering in Medicine and Biology Magazine.

[7]  S T Tümer,et al.  Three-dimensional kinematic modelling of the human shoulder complex--Part I: Physical model and determination of joint sinus cones. , 1989, Journal of biomechanical engineering.

[8]  Jack Crosbie,et al.  Scapulohumeral rhythm and associated spinal motion. , 2008, Clinical biomechanics.

[9]  E V Biryukova,et al.  Kinematics of human arm reconstructed from spatial tracking system recordings. , 2000, Journal of biomechanics.

[10]  Alessandro Tognetti,et al.  Daily-life monitoring of stroke survivors motor performance: The INTERACTION sensing system , 2014, 2014 36th Annual International Conference of the IEEE Engineering in Medicine and Biology Society.

[11]  Lucy E. Dunne,et al.  Theory and characterization of a top-thread coverstitched stretch sensor , 2012, 2012 IEEE International Conference on Systems, Man, and Cybernetics (SMC).

[12]  R A Prokopenko,et al.  Assessment of the accuracy of a human arm model with seven degrees of freedom. , 2001, Journal of biomechanics.

[13]  Rita Paradiso,et al.  Electroactive fabrics and wearable man-machine interfaces , 2005 .

[14]  Alessandro Tognetti,et al.  A Full Body Sensing System for Monitoring Stroke Patients in a Home Environment , 2014, BIOSTEC.

[15]  W. Kibler Scapular involvement in impingement: signs and symptoms. , 2006, Instructional Course Lectures.

[16]  D. Rossi,et al.  New generation of wearable goniometers for motion capture systems , 2014, Journal of NeuroEngineering and Rehabilitation.

[17]  M. Pacelli,et al.  Textile Piezoresistive Sensors for Biomechanical Variables Monitoring , 2006, 2006 International Conference of the IEEE Engineering in Medicine and Biology Society.

[18]  P Herberts,et al.  Biomechanical model of the human shoulder--I. Elements. , 1987, Journal of biomechanics.

[19]  Robert Karpiński,et al.  BIOMECHANICS OF THE UPPER LIMB , 2016 .

[20]  A. Fugl-Meyer,et al.  The post-stroke hemiplegic patient. 1. a method for evaluation of physical performance. , 1975, Scandinavian journal of rehabilitation medicine.

[21]  Alessandro Tognetti,et al.  Wearable Goniometer and Accelerometer Sensory Fusion for Knee Joint Angle Measurement in Daily Life , 2015, Sensors.

[22]  G. Harris,et al.  An upper extremity kinematic model for evaluation of hemiparetic stroke. , 2006, Journal of biomechanics.

[23]  D. Roetenberg,et al.  Xsens MVN: Full 6DOF Human Motion Tracking Using Miniature Inertial Sensors , 2009 .

[24]  G. Tröster,et al.  Sensor for Measuring Strain in Textile , 2008, Sensors.

[25]  Anita Bagley,et al.  A method for determination of upper extremity kinematics. , 2002, Gait & posture.

[26]  Oliver Rettig,et al.  A new kinematic model of the upper extremity based on functional joint parameter determination for shoulder and elbow. , 2009, Gait & posture.

[27]  P. Pietrini,et al.  Sensing Glove for Brain Studies: Design and Assessment of Its Compatibility for fMRI With a Robust Test , 2008, IEEE/ASME Transactions on Mechatronics.

[28]  R Happee,et al.  The control of shoulder muscles during goal directed movements, an inverse dynamic analysis. , 1992, Journal of biomechanics.

[29]  Fokke B. van Meulen,et al.  Assessment of Daily-Life Reaching Performance After Stroke , 2014, Annals of Biomedical Engineering.

[30]  F. V. D. van der Helm A finite element musculoskeletal model of the shoulder mechanism. , 1994, Journal of biomechanics.

[31]  Peter H. Veltink,et al.  Ambulatory Position and Orientation Tracking Fusing Magnetic and Inertial Sensing , 2007, IEEE Transactions on Biomedical Engineering.

[32]  Angelo M. Sabatini,et al.  Estimating Three-Dimensional Orientation of Human Body Parts by Inertial/Magnetic Sensing , 2011, Sensors.

[33]  Laura Rocchi,et al.  Ambulatory measurement of shoulder and elbow kinematics through inertial and magnetic sensors , 2008, Medical & Biological Engineering & Computing.

[34]  P H Veltink,et al.  Ambulatory measurement of arm orientation. , 2007, Journal of biomechanics.

[35]  F.C.T. van der Helm,et al.  A finite element musculoskeletal model of the shoulder mechanism. , 1994 .

[36]  Rita Paradiso,et al.  Performances evaluation of piezoresistive fabric sensors as function of yarn structure , 2013, 2013 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC).

[37]  Alessandro Tognetti,et al.  Exploiting Wearable Goniometer Technology for Motion Sensing Gloves , 2014, IEEE Journal of Biomedical and Health Informatics.