EXPERIMENTAL AND NUMERICAL STUDIES ON MIXING OF YIELD-PSEUDOPLASTIC FLUIDS WITH A COAXIAL MIXER

An anchor coaxial mixer is a combination of an anchor impeller and a central impeller. The central and anchor impellers provide the shear and bulk flows within the mixing tank, respectively. The agitation efficiency is governed by the proper design of this mixing system. In this study, the effects of the central impeller speed, anchor impeller speed, operation mode, and the speed ratio of an anchor-Scaba coaxial impeller were evaluated on its power consumption, mixing time, and flow pattern using electrical resistance tomography (ERT) and computational fluid dynamics (CFD). An ERT system with a five-plane assembly of peripheral sensing rings, each containing 16 stainless steel electrodes, was utilized to measure the mixing time for this coaxial mixer. The sliding mesh (SM) technique in the CFD analysis with the modified Herschel-Bulkley model was applied to simulate the impeller rotation and the rheological behavior of the xanthan gum solution (a pseudoplastic fluid possessing yield stress). To validate the model, the CFD results for power consumption were compared to the experimental data. The mixing times were correlated using the specific power consumption model.

[1]  Brian H. Brown,et al.  Imaging spatial distributions of resistivity using applied potential tomography , 1983 .

[2]  Philippe A. Tanguy,et al.  Mixing Times in Coaxial Mixers with Newtonian and Non-Newtonian Fluids , 2006 .

[3]  Philippe A. Tanguy,et al.  Mixing analysis in a coaxial mixer , 2006 .

[4]  B. Brown,et al.  Applied potential tomography. , 1989, Journal of the British Interplanetary Society.

[5]  M. Moo‐Young,et al.  The blending efficiencies of some impellers in batch mixing , 1972 .

[6]  Leila Pakzad,et al.  Agitation of Herschel–Bulkley fluids with the Scaba–anchor coaxial mixers , 2013 .

[7]  Philippe A. Tanguy,et al.  Revisiting the Performance of a Coaxial Mixer , 2008 .

[8]  Philippe A. Tanguy,et al.  Characterization of Mixing Patterns in a Coaxial Mixer , 2007 .

[9]  Alvin W. Nienow,et al.  On impeller circulation and mixing effectiveness in the turbulent flow regime , 1997 .

[10]  Philippe A. Tanguy,et al.  Coaxial Mixer Hydrodynamics with Newtonian and non-Newtonian Fluids , 2004 .

[11]  Leila Pakzad,et al.  Characterisation of the mixing of non‐newtonian fluids with a scaba 6SRGT impeller through ert and CFD , 2013 .

[12]  Philippe A. Tanguy,et al.  Numerical and experimental study of a dual-shaft coaxial mixer with viscous fluids , 2007 .

[13]  Philippe A. Tanguy,et al.  Finite element modeling of the laminar and transition flow of the Superblend dual shaft coaxial mixer on parallel computers , 2009 .

[14]  F. J. Dickin,et al.  Imaging stirred‐vessel macromixing using electrical resistance tomography , 1998 .

[15]  Philip K. Chan,et al.  Using computational fluid dynamics modeling to study the mixing of pseudoplastic fluids with a Scaba 6SRGT impeller , 2008 .

[16]  Philip K. Chan,et al.  Using electrical resistance tomography and computational fluid dynamics modeling to study the formation of cavern in the mixing of pseudoplastic fluids possessing yield stress , 2008 .

[17]  Philippe A. Tanguy,et al.  Power-draw analysis of a coaxial mixer with Newtonian and non-Newtonian fluids in the laminar regime , 2002 .

[18]  Torsten Schneider,et al.  Mischzeiten und Wärmeübergang in Koaxialrührwerken , 1990 .

[19]  Philip K. Chan,et al.  Measuring Mixing Time in the Agitation of Non‐Newtonian Fluids through Electrical Resistance Tomography , 2008 .

[20]  Philippe A. Tanguy,et al.  Power Characteristics in Coaxial Mixing: Newtonian and Non-Newtonian Fluids , 2005 .

[21]  Constance M. Tuffile,et al.  Determination of oxygen‐transfer coefficients in viscous streptomycete fermentations , 1970 .

[22]  Zhengming Gao,et al.  Power Demand and Mixing Performance of Coaxial Mixers in Non-Newtonian Fluids , 2011 .

[23]  L. Rudolph,et al.  Experimental and Numerical Analysis of Power Consumption for Mixing of High Viscosity Fluids with a Co-Axial Mixer , 2007 .

[24]  Joan Schweikart,et al.  Handbook of Industrial Mixing: Science and Practice , 2004 .

[25]  Leila Pakzad,et al.  Evaluation of the mixing of non-Newtonian biopolymer solutions in the reactors equipped with the coaxial mixers through tomography and CFD , 2013 .