Stress corrosion cracking behavior of selected stainless steels in saturated potash brine solution at different temperatures

[1]  P. D. Antunes,et al.  Influence of the heat input and aging treatment on microstructure and mechanical properties of AISI 317 L steel weldments using 0020 robotic–pulsed GMAW , 2019, The International Journal of Advanced Manufacturing Technology.

[2]  N. A. Mariano,et al.  Influence of the Solution-Treatment Temperature and Short Aging Times on The Electrochemical Corrosion Behaviour of Uns S32520 Super Duplex Stainless Steel , 2019, Materials Research.

[3]  D. Chun,et al.  Molybdenum Effects on Pitting Corrosion Resistance of FeCrMnMoNC Austenitic Stainless Steels , 2018, Metals.

[4]  Jian Wang,et al.  Analysis of Initial Oxidation Process of 2205 Duplex Stainless Steel in Closed Container at High Temperature , 2018 .

[5]  Lei Zhang,et al.  Correlation between electrochemical properties and stress corrosion cracking of super 13Cr under an HTHP CO2 environment , 2018, RSC advances.

[6]  G. Sant,et al.  Direct observation of pitting corrosion evolutions on carbon steel surfaces at the nano-to-micro- scales , 2018, Scientific Reports.

[7]  N. Alcântara,et al.  Stress Corrosion Cracking Behaviour of Dissimilar Welding of AISI 310S Austenitic Stainless Steel to 2304 Duplex Stainless Steel , 2018 .

[8]  Qiaoqin Yang,et al.  The Effect of Deposition Parameters on the Structure and Mechanical Properties of Chromium Oxide Coatings Deposited by Reactive Magnetron Sputtering , 2018 .

[9]  Fu-hui Wang,et al.  Modeling of the Critical Pitting Temperature between the Laboratory-Scale Specimen and the Large-Scale Specimen , 2018 .

[10]  G. Syaranamual.  On-state reliability study of AlGaN/GaN high electron mobility transistor on silicon , 2018 .

[11]  R. Loto.  Pitting Corrosion Resistance and Inhibition of Lean Austenitic Stainless Steel Alloys , 2017 .

[12]  Sangshik Kim,et al.  Effects of Nitrogen and Tensile Direction on Stress Corrosion Cracking Susceptibility of Ni-Free FeCrMnC-Based Duplex Stainless Steels , 2017, Materials.

[13]  L. Tsay,et al.  Stress Corrosion Cracking Susceptibility of 304L Substrate and 308L Weld Metal Exposed to a Salt Spray , 2017, Materials.

[14]  M. Sandim,et al.  Extraction de sable de la rivière des travaux de dragage de la machine de pompage de bateau drague d'aspiration de la faucheuse , 2017 .

[15]  E. C. Souza,et al.  Influence of Ferrite Phase Content on the Electrochemical Properties of Duplex Stainless Steels , 2016 .

[16]  Preet M. Singh,et al.  Corrosion Behavior of Austenitic and Duplex Stainless Steels in Thiosulfate- and Chloride-Containing Environments , 2015 .

[17]  Tao Zhang,et al.  Effect of pitting nucleation on critical pitting temperature of 316L stainless steel by nitric acid passivation , 2015 .

[18]  P. D. Antunes,et al.  Effect of weld metal chemistry on stress corrosion cracking behavior of AISI 444 ferritic stainless steel weldments in boiling chloride solution , 2013 .

[19]  R. Arıkan,et al.  Determination of Susceptibility to Intergranular Corrosion of UNS 31803 Type Duplex Stainless Steel by Electrochemical Reactivation Method: A Comparative Study , 2012 .

[20]  Jong-hee Kim,et al.  Effect of plastic deformation on the corrosion resistance of ferritic stainless steel as a bipolar plate for polymer electrolyte membrane fuel cells , 2012 .

[21]  Ramesh Singh.  Welding Corrosion-Resistant Alloys: Stainless Steel , 2012 .

[22]  A. Volinsky,et al.  Discontinuous surface cracks during stress corrosion cracking of stainless steel single crystal , 2011 .

[23]  D. Ponge,et al.  Design of a novel Mn-based 1 GPa duplex stainless TRIP steel with 60% ductility by a reduction of austenite stability , 2011 .

[24]  L. Tsay,et al.  Microstructure and Stress Corrosion Cracking Behavior of the Weld Metal in Alloy 52-A508 Dissimilar Welds , 2011 .

[25]  R Parrott,et al.  Chloride stress corrosion cracking in austenitic stainless steel Assessing susceptibility and structural integrity , 2011 .

[26]  Yiming Jiang,et al.  Effect of temperature change rate on the critical pitting temperature for duplex stainless steel , 2009 .

[27]  Yiming Jiang,et al.  Critical pitting and repassivation temperatures for duplex stainless steel in chloride solutions , 2008 .

[28]  R. Arıkan,et al.  Determination of Susceptibility to Intergranular Corrosion of UNS 31803 Type Duplex Stainless Steel by Electrochemical Reactivation Method , 2008 .

[29]  Y. Takeda,et al.  The dependency of the crack growth rate on the loading pattern and temperature in stress corrosion cracking of strain-hardened 316L stainless steels in a simulated BWR environment , 2008 .

[30]  R. Nishimura.  Characterization and perspective of stress corrosion cracking of austenitic stainless steels (type 304 and type 316) in acid solutions using constant load method , 2007 .

[31]  D. Clarke,et al.  Defect and stress characterization of AlN films by Raman spectroscopy , 2006 .

[32]  R. Nishimura,et al.  The effect of test temperature on SCC behavior of austenitic stainless steels in boiling saturated magnesium chloride solution , 2006 .

[33]  Z. Ahmad.  CHAPTER 9 – SELECTION OF MATERIALS FOR CORROSIVE ENVIRONMENT , 2006 .

[34]  Takashi Sato,et al.  An ATEM study of oxidation behavior of SCC crack tips in 304L stainless steel in high temperature oxygenated water , 2005 .

[35]  F. M. Bayoumi,et al.  Effect of nitrogen on the corrosion behavior of austenitic stainless steel in chloride solutions , 2005 .

[36]  H. Shih,et al.  Stress corrosion cracking of type 321 stainless steels in simulated petrochemical process environments containing hydrogen sulfide and chloride , 2005 .

[37]  K. Kawauchi,et al.  Non-destructive Rapid Analysis Discriminating between Chromium(VI) and Chromium(III) Oxides in Electrical and Electronic Equipment Using Raman Spectroscopy , 2005, Analytical sciences : the international journal of the Japan Society for Analytical Chemistry.

[38]  T. Terachi,et al.  Microstructural Characterization of SCC Crack Tip and Oxide Film for SUS 316 Stainless Steel in Simulated PWR Primary Water at 320°C , 2005 .

[39]  Alan Turnbull,et al.  Pit to crack transition in stress corrosion cracking of a steam turbine disc steel , 2004 .

[40]  R. Nishimura,et al.  SCC evaluation of type 304 and 316 austenitic stainless steels in acidic chloride solutions using the slow strain rate technique , 2004 .

[41]  M. Mayuzumi,et al.  Chloride Induced Stress Corrosion Cracking of Type 304 and 304L Stainless Steels in Air , 2003 .

[42]  C. García,et al.  Stress corrosion cracking behavior of cold-worked and sensitized Type 304 stainless steel using the slow strain rate test , 2002 .

[43]  D. Landolt,et al.  Effect of chromium content and sweep rate on passive film growth on iron-chromium alloys studied by EQCM and XPS , 2002 .

[44]  M. Hanson,et al.  Zinc treatment effects on corrosion behavior of 304 stainless steel in high temperature, hydrogenated water , 2001 .

[45]  J. Moverare.  Residual Stresses and Fatigue in a Duplex Stainless Steel , 1999 .

[46]  A. El-yazgi,et al.  Stress corrosion cracking of duplex and super duplex stainless steels in sour environments , 1998 .

[47]  U. Kamachi Mudali,et al.  In situ pH measurements during localised corrosion of type 316LN stainless steel using scanning electrochemical microscopy , 1998 .

[48]  D R Walt,et al.  In situ fluorescence imaging of localized corrosion with a pH-sensitive imaging fiber. , 1997, Analytical chemistry.

[49]  R. Gunn.  Duplex stainless steels : microstructure, properties and applications , 1997 .

[50]  T. Shoji,et al.  Stress Corrosion Cracking Susceptibility of Nickel-Molybdenum Alloys by Slow Strain Rate and Immersion Testing , 1996 .

[51]  S. Wilhelm,et al.  Relationship of Localized Corrosion and SCC in Oil and Gas Production Environments , 1993 .

[52]  J. Nilsson.  Super duplex stainless steels , 1992 .

[53]  J. Robertson.  The mechanism of high temperature aqueous corrosion of stainless steels , 1991 .

[54]  B. D. Lichter,et al.  A theory of transgranular stress-corrosion cracking , 1991 .

[55]  M. Seo,et al.  Comparison of stress corrosion cracking susceptibility of austenitic and ferritic stainless steels in small punch testing , 1991 .

[56]  R. Davidson,et al.  The mechanism and kinetics of corrosion product release from stainless steel in lithiated high temperature water , 1987 .

[57]  K. Sieradzki,et al.  Brittle behavior of ductile metals during stress-corrosion cracking , 1985 .

[58]  A. Atrens,et al.  Corrosion of stainless steels in chloride solution: An XPS investigation of passive films , 1985 .

[59]  R. Kane,et al.  Effect of Heat Treatment and Microstructure on the Corrosion and SCC of Duplex Stainless Steels in H2S/Cl− Environments , 1984 .

[60]  P. Swann,et al.  Pre-exposure embrittlement and stress corrosion failure in AlZnMg Alloys , 1976 .

[61]  H. Logan.  Film-Rupture Mechanism of Stress Corrosion , 1952 .