An extraction-based verification methodology for MEMS

Micromachining techniques are being increasingly used to develop miniaturized sensor and actuator systems. These system designs tend to be captured as layout, requiring extraction of the equivalent microelectromechanical circuit as a necessary step for design verification. This paper presents an extraction methodology to (re-)construct a circuit schematic representation from the layout, enabling the designer to use microelectromechanical circuit simulators to verify the functional behavior of the layout. This methodology uses a canonical representation of the given layout on which feature-based and graph-based recognition algorithms are applied to generate the equivalent extracted schematic. Extraction can be performed to either the atomic level or the functional level representation of the reconstructed circuit. The choice of level in hierarchy is governed by the trade off between simulation time and simulation accuracy of the extracted circuit. The combination of the MEMS layout extraction and lumped-parameter circuit simulation provides MEMS designers with VLSI-like tools enabling faster design cycles, and improved design productivity.

[1]  Gary K. Fedder.  Layout Synthesis of Microresonators , 2006 .

[2]  K. J. Gabriel,et al.  Design, fabrication, and operation of submicron gap comb-drive microactuators , 1992 .

[3]  Nicholas R. Swart.  A design flow for micromachined electromechanical systems , 1999, IEEE Design & Test of Computers.

[4]  Bernhard E. Boser,et al.  A micromachined fully differential lateral accelerometer , 1996, Proceedings of Custom Integrated Circuits Conference.

[5]  John K. Ousterhout,et al.  Corner Stitching: A Data-Structuring Technique for VLSI Layout Tools , 1984, IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems.

[6]  William C. Tang,et al.  Laterally Driven Polysilicon Resonant Microstructures , 1989 .

[7]  Tamal Mukherjee,et al.  Layout Extraction for Integrated Electronics and MEMS Devices , 2001 .

[8]  S. F. Bart,et al.  An Environment for MEMS Design and Verification , 1998 .

[9]  William C. Tang,et al.  Electrostatic-comb drive of lateral polysilicon resonators , 1990 .

[10]  J. Bustillo,et al.  Surface micromachining for microelectromechanical systems , 1998, Proc. IEEE.

[11]  M. Mehregany,et al.  Surface micromachining of polycrystalline SiC films using microfabricated molds of SiO/sub 2/ and polysilicon , 1999 .

[12]  G Lorenz,et al.  Network-Type Modeling of Micromachined Sensor Systems , 1998 .

[13]  Gary K. Fedder,et al.  Hierarchical Representation and Simulation of Micromachined Inertial Sensors , 1998 .

[14]  G. Kovacs,et al.  Bulk micromachining of silicon , 1998, Proc. IEEE.

[15]  Jason V. Clark,et al.  Modified Nodal Analysis for MEMS with Multi-Energy Domains , 2000 .

[16]  Gary M. Tarolli,et al.  Hierarchical Circuit Extraction with Detailed Parasitic Capacitance , 1983, 20th Design Automation Conference Proceedings.

[17]  Tamal Mukherjee,et al.  Numerical spring models for behavioral simulation of MEMS inertial sensors , 2000, Design, Test, Integration, and Packaging of MEMS/MOEMS.

[18]  Steven Paul McCormick.  EXCL: A Circuit Extractor for IC Designs , 1984, 21st Design Automation Conference Proceedings.

[19]  Elliott R. Brown,et al.  RF-MEMS switches for reconfigurable integrated circuits , 1998 .

[20]  Jeffrey D Ullma.  Computational Aspects of VLSI , 1984 .

[21]  Satyandra K. Gupta,et al.  FEATURE-RECOGNITION FOR MEMS EXTRACTION , 1998 .

[22]  Carl Ebeling.  GeminiII: a second generation layout validation program , 1988, [1988] IEEE International Conference on Computer-Aided Design (ICCAD-89) Digest of Technical Papers.

[23]  William C. Tang,et al.  Electrostatically balanced comb drive for controlled levitation , 1990, IEEE 4th Technical Digest on Solid-State Sensor and Actuator Workshop.

[24]  H. Guckel,et al.  High-aspect-ratio micromachining via deep X-ray lithography , 1998, Proc. IEEE.

[25]  Gary K. Fedder,et al.  Nodal Simulation of Suspended MEMS With Multiple Degrees of Freedom , 1997 .

[26]  Qi Jing,et al.  A hierarchical circuit-level design methodology for microelectromechanical systems , 1999 .

[27]  Christopher C. T. Nguyen,et al.  High-order micromechanical electronic filters , 1997, Proceedings IEEE The Tenth Annual International Workshop on Micro Electro Mechanical Systems. An Investigation of Micro Structures, Sensors, Actuators, Machines and Robots.

[28]  K. Wise,et al.  A monolithic fully-integrated vacuum-sealed CMOS pressure sensor , 2002 .

[29]  Stephen M. Trimberger.  An Introduction to CAD for VLSI , 1987 .

[30]  Tamal Mukherjee,et al.  Hierarchical Design and Test of Integrated Microsystems , 1999, IEEE Des. Test Comput..

[31]  S. K. Gupta,et al.  MEMS Component Extraction , 1999 .

[32]  M. R. Douglass,et al.  A MEMS-based projection display , 1998, Proc. IEEE.