Poly(d,l-cactide/ε-caprolactone)/hydroxyapatite composites

Abstract In this study, elastomeric d , l -lactide and e -caprolactone copolymers with two different molecular weights ( M n : 108.000 and 40.000) were synthesized by ring-opening polymerization of the respective dimers by using stannous octoate as the catalyst, as a potential bone-filling material. The final ratio of d , l -lactide to e -caprolactone obtained by 1 NMR was 60/40 (comparing to the initial ratio of 50/50). Both copolymers were amorphous having T g at around −21°C. Different amounts of hydroxyapatite (HA) powder were loaded within the copolymers. These composites were easily shaped by hand. Mechanical properties of the composites changed with the HA loading and the molecular weight of the copolymer. The percent elongation decreased, while both the Young's modulus and yield point (stress) increased with the HA content. The copolymers were degraded within the Ringer solutions in about 6 weeks. The molecular weight distribution became broader during degradation. Incorporation of HA reduced the degradation rate.

[1]  M. Asano,et al.  Synthesis of low-molecular-weight copoly(l-lactic acid/ɛ-caprolactone) by direct copolycondensation in the absence of catalysts, and enzymatic degradation of the polymers , 1990 .

[2]  Y. Ikada,et al.  Polymer-hydroxyapatite composites for biodegradable bone fillers. , 1986, Biomaterials.

[3]  W. Bonfield,et al.  Hydroxyapatite reinforced polyethylene--a mechanically compatible implant material for bone replacement. , 1981, Biomaterials.

[4]  T. Karjalainen,et al.  Biodegradable lactone copolymers. III. Mechanical properties of ε‐caprolactone and lactide copolymers after hydrolysis in vitro , 1996 .

[5]  R. Doremus,et al.  Tissue, cellular and subcellular events at a bone-ceramic hydroxylapatite interface. , 1977, Journal of bioengineering.

[6]  I. Macnab,et al.  Ceramics in surgery , 1971 .

[7]  C. V. van Blitterswijk,et al.  Evaluation of hydroxylapatite/poly(L-lactide) composites: mechanical behavior. , 1992, Journal of biomedical materials research.

[8]  H Oonishi,et al.  Orthopaedic applications of hydroxyapatite. , 1991, Biomaterials.

[9]  T. Mang,et al.  Polylactones. 1. Copolymerizations of glycolide and iε-caprolactone , 1984 .

[10]  J. Jansen,et al.  Histological evaluation of a biodegradable Polyactive/hydroxyapatite membrane. , 1995, Biomaterials.

[11]  J. Kasperczyk,et al.  Coordination polymerization of lactides, 3. Copolymerization of L,L‐lactide and ε‐caprolactone in the presence of initiators containing Zn and Al , 1993 .

[12]  N. Scharnagl,et al.  Poly(lactones). 9. Polymerization mechanism of metal alkoxide initiated polymerizations of lactide and various lactones , 1988 .

[13]  J. Knowles,et al.  Development of a degradable composite for orthopaedic use: mechanical evaluation of an hydroxyapatite-polyhydroxybutyrate composite material. , 1993, Biomaterials.

[14]  T. Karjalainen,et al.  Biodegradable lactone copolymers.II.Hydrolytic study of e-caprolactone and lactide copolymers , 1996 .

[15]  A. Schindler,et al.  Sustained drug delivery systems. I. The permeability of poly(ϵ-caprolactone), poly(DL-lactic acid), and their copolymers , 1979 .

[16]  P. Klopper,et al.  Tissue response to dense apatite implants in rats. , 1980, Journal of biomedical materials research.

[17]  T. Karjalainen,et al.  Biodegradable lactone copolymers. I: Characterization and mechanical behavior of ε-caprolactone and lactide copolymers , 1996 .

[18]  J. Kasperczyk,et al.  Coordination polymerization of lactides, 4. The role of transesterification in the copolymerization of L,L‐lactide and ε‐caprolactone , 1993 .

[19]  D. Grijpma,et al.  High molecular weight copolymers of l-lactide and ε-caprolactone as biodegradable elastomeric implant materials , 1991 .

[20]  Joseph D. Bronzino,et al.  The Biomedical Engineering Handbook , 1995 .

[21]  D. Grijpma,et al.  Polymerization temperature effects on the properties of l-lactide and ε-caprolactone copolymers , 1991 .

[22]  H. Kricheldorf,et al.  Polylactones. 13. Transesterification of Poly(L-Lactide) with Poly(Glycoude), Poly(β-Propio-Lactone), and Poly[ε -Caprolactone) , 1987 .

[23]  P. Dubois,et al.  Macromolecular engineering of polylactones and polylactides. 7. Structural analysis of copolyesters of epsilon-caprolactone and L- of D,L-lactide initated by Al(OiPr)3 , 1992 .

[24]  J O Hollinger,et al.  Preliminary report on the osteogenic potential of a biodegradable copolymer of polyactide (PLA) and polyglycolide (PGA). , 1983, Journal of biomedical materials research.

[25]  J. Frame.  Hydroxyapatite as a biomaterial for alveolar ridge augmentation. , 1987, International journal of oral and maxillofacial surgery.

[26]  J. A. Hubbell,et al.  Rapidly degraded terpolymers of dl-lactide, glycolide, and epsilon-caprolactone with increased hydrophilicity by copolymerization with polyethers. , 1990, Journal of biomedical materials research.

[27]  R. Jerome,et al.  Synthesis, characterization, and miscibility of caprolactone random copolymers , 1986 .

[28]  Michael Jarcho,et al.  Calcium phosphate ceramics as hard tissue prosthetics. , 1981, Clinical orthopaedics and related research.

[29]  C. Klein,et al.  Biodegradation behavior of various calcium phosphate materials in bone tissue. , 1983, Journal of biomedical materials research.

[30]  J. J. Grote,et al.  Bioreactions at the tissue/hydroxyapatite interface. , 1985, Biomaterials.