Implementation of a Tabulated Flamelet Model for Compression Ignition Engine Applications

[1]  Norbert Peters,et al.  Modeling the Combustion in a Small-Bore Diesel Engine Using a Method Based on Representative Interactive Flamelets , 1999 .

[2]  Daniel C. Haworth,et al.  Simulations of transient n-heptane and n-dodecane spray flames under engine-relevant conditions using a transported PDF method , 2013 .

[3]  John Abraham,et al.  Evaluation of an Unsteady Flamelet Progress Variable Model for Autoignition and Flame Lift-Off in Diesel Jets , 2013 .

[4]  Giulio Borghesi,et al.  DNS of a turbulent, self-igniting n-dodecane / air jet , 2016 .

[5]  Matthias Ihme,et al.  Prediction of autoignition in a lifted methane/air flame using an unsteady flamelet/progress variable model , 2010 .

[6]  Van Oijen,et al.  Modelling of Premixed Laminar Flames using Flamelet-Generated Manifolds , 2000 .

[7]  Heinz Pitsch,et al.  Three-Dimensional Modeling of NOx and Soot Formation in DI-Diesel Engines Using Detailed Chemistry Based on the Interactive Flamelet Approach , 1996 .

[8]  de Lph Philip Goey,et al.  Modeling of PCCI combustion with FGM tabulated chemistry , 2014 .

[9]  Scott A. Skeen,et al.  Understanding the ignition mechanism of high-pressure spray flames , 2017 .

[10]  Daniel L. Flowers,et al.  Acceleration of Detailed Chemical Kinetics Using Multi-zone Modeling for CFD in Internal Combustion Engine Simulations , 2012 .

[11]  Rolf D. Reitz,et al.  Comparison of the Characteristic Time (CTC), Representative Interactive Flamelet (RIF), and Direct Integration with Detailed Chemistry Combustion Models against Optical Diagnostic Data for Multi-Mode Combustion in a Heavy-Duty DI Diesel Engine , 2006 .

[12]  P. K. Senecal,et al.  Large eddy simulation of a reacting spray flame with multiple realizations under compression ignition engine conditions , 2015 .

[13]  John Abraham,et al.  RANS and LES Study of Lift-Off Physics in Reacting Diesel Jets , 2014 .

[14]  Yuanjiang Pei,et al.  Transported probability density function modelling of the vapour phase of an n-heptane jet at diesel engine conditions , 2013 .

[15]  P. K. Senecal,et al.  Predictions of Transient Flame Lift-Off Length With Comparison to Single-Cylinder Optical Engine Experiments , 2013 .

[16]  Mikael Mortensen,et al.  Derivation of the conditional moment closure equations for spray combustion , 2009 .

[17]  Norbert Peters,et al.  Simulation of combustion in direct injection diesel engines using a eulerian particle flamelet model , 2000 .

[18]  John Abraham,et al.  An evaluation of the assumptions of the flamelet model for diesel combustion modeling , 2015 .

[19]  Robert W. Bilger,et al.  Conditional moment closure for turbulent reacting flow , 1993 .

[20]  C Cemil Bekdemir,et al.  Modeling Diesel engine combustion using pressure dependent Flamelet Generated Manifolds , 2011 .

[21]  Pinaki Pal,et al.  Assessment of flamelet versus multi-zone combustion modeling approaches for stratified-charge compression ignition engines , 2016 .

[22]  Johan Engström,et al.  Heavy-Duty Diesel Combustion With Ultra-Low NOx and SOOT Emissions~A Comparison Between Experimental Data and CFD Simulations , 2005 .

[23]  Ossi Kaario,et al.  Large Eddy Simulation of n-dodecane spray flames using Flamelet Generated Manifolds , 2016 .

[24]  Charles J. Mueller,et al.  Investigation of Methyl Decanoate Combustion in an Optical Direct-Injection Diesel Engine , 2014 .

[25]  Tianfeng Lu,et al.  Development and validation of an n-dodecane skeletal mechanism for spray combustion applications , 2014 .

[26]  P. K. Senecal,et al.  LARGE EDDY SIMULATION OF FUEL-SPRAY UNDER NON-REACTING IC ENGINE CONDITIONS , 2013 .

[27]  C Cemil Bekdemir,et al.  Predicting diesel combustion characteristics with Large-Eddy Simulations including tabulated chemical kinetics , 2013 .

[28]  Giulio Borghesi,et al.  Complex chemistry DNS of n-heptane spray autoignition at high pressure and intermediate temperature conditions , 2013 .

[29]  Paul W. Nyholm,et al.  Engine combustion network. , 2010 .

[30]  Yuanjiang Pei,et al.  EVALUATION OF TURBULENCE-CHEMISTRY INTERACTION UNDER DIESEL ENGINE CONDITIONS WITH MULTI-FLAMELET RIF MODEL , 2014 .

[31]  Francesco Contino,et al.  Comparison of well-mixed and multiple representative interactive flamelet approaches for diesel spray combustion modelling , 2014 .

[32]  Tianfeng Lu,et al.  Simulating Flame Lift-Off Characteristics of Diesel and Biodiesel Fuels Using Detailed Chemical-Kinetic Mechanisms and Large Eddy Simulation Turbulence Model , 2012 .

[33]  Yuanjiang Pei,et al.  An equivalent dissipation rate model for capturing history effects in non-premixed flames , 2017 .

[34]  Jian Zhang,et al.  Regularization of reaction progress variable for application to flamelet-based combustion models , 2012, J. Comput. Phys..

[35]  Prithwish Kundu.  Tabulated Combustion Model Development For Non-Premixed Flames. , 2015 .

[36]  N. Peters.  Laminar diffusion flamelet models in non-premixed turbulent combustion , 1984 .

[37]  Sibendu Som,et al.  Novel Tabulated Combustion Model Approach for Lifted Spray Flames with Large Eddy Simulations , 2016 .

[38]  Tianfeng Lu,et al.  A reduced mechanism for biodiesel surrogates for compression ignition engine applications , 2012 .

[39]  Philipp Schapotschnikow,et al.  Efficient Combustion Modeling Based on Tabkin ® CFD Look-up Tables: A Case Study of a Lifted Diesel Spray Flame , 2012 .

[40]  Yuanjiang Pei,et al.  A Comprehensive Study of Effects of Mixing and Chemical Kinetic Models on Predictions of n-heptane Jet Ignitions with the PDF Method , 2013 .