GRAVITY Coudé Infrared Adaptive Optics (CIAO) system for the VLT Interferometer

GRAVITY is a second generation instrument for the VLT Interferometer, designed to enhance the near-infrared astrometric and spectro-imaging capabilities of VLTI. Combining beams from four telescopes, GRAVITY will provide an astrometric precision of order 10 micro-arcseconds, imaging resolution of 4 milli-arcseconds, and low and medium resolution spectro-interferometry, pushing its performance far beyond current infrared interferometric capabilities. To maximise the performance of GRAVITY, adaptive optics correction will be implemented at each of the VLT Unit Telescopes to correct for the e_ects of atmospheric turbulence. To achieve this, the GRAVITY project includes a development programme for four new wavefront sensors (WFS) and NIR-optimized real time control system. These devices will enable closed-loop adaptive correction at the four Unit Telescopes in the range 1.4-2.4 μm. This is crucially important for an e_cient adaptive optics implementation in regions where optically bright references sources are scarce, such as the Galactic Centre. We present here the design of the GRAVITY wavefront sensors and give an overview of the expected adaptive optics performance under typical observing conditions. Bene_ting from newly developed SELEX/ESO SAPHIRA electron avalanche photodiode (eAPD) detectors providing fast readout with low noise in the near-infrared, the AO systems are expected to achieve residual wavefront errors of 400 nm at an operating frequency of 500 Hz.≤

[1]  Laurent Jocou,et al.  The integrated optics beam combiner assembly of the GRAVITY/VLTI instrument , 2012, Other Conferences.

[2]  Luigi Andolfato,et al.  Star separator system for the dual-field capability (PRIMA) of the VLTI , 2004, SPIE Astronomical Telescopes + Instrumentation.

[3]  K. Perraut,et al.  Dimensioning the Gravity adaptive optics wavefront sensor , 2010, Astronomical Telescopes + Instrumentation.

[4]  K. Perraut,et al.  The GRAVITY spectrometers: system design , 2012, Other Conferences.

[5]  Armin Böhm,et al.  Optimizing the transmission of the GRAVITY/VLTI near-infrared wavefront sensor , 2012, Other Conferences.

[6]  S. Rabien,et al.  The fringe detection laser metrology for the GRAVITY interferometer at the VLTI , 2010, Astronomical Telescopes + Instrumentation.

[7]  Vianak Naranjo,et al.  GRAVITY: observing the universe in motion , 2011 .

[8]  Frank Eisenhauer,et al.  GRAVITY: design and performance of the fringe tracker , 2010, Astronomical Telescopes + Instrumentation.

[9]  Gert Finger,et al.  Evaluation and optimization of NIR HgCdTe avalanche photodiode arrays for adaptive optics and interferometry , 2012, Other Conferences.

[10]  Enrico Fedrigo,et al.  SPARTA for the VLT: status and plans , 2010, Astronomical Telescopes + Instrumentation.

[11]  Enrico Fedrigo,et al.  SPARTA for the VLT: status and plans , 2012, Other Conferences.

[12]  T. Paumard,et al.  Performance of astrometric detection of a hotspot orbiting on the innermost stable circular orbit of the galactic centre black hole , 2010, 1011.5439.

[13]  Frank Eisenhauer,et al.  The GRAVITY spectrometers: optical design and principle of operation , 2010, Astronomical Telescopes + Instrumentation.

[14]  Werner Laun,et al.  Science with GRAVITY, the NIR interferometric imager , 2011 .