Parametric Analysis and Optimization of Inlet Deflection Angle in Torque Converters

[1]  Paul E. Allaire,et al.  Computational Modeling and Experimental Investigation of Static Straight-Through Labyrinth Seals , 2008 .

[2]  Milun J. Babić,et al.  Theoretical and experimental studies on torque converters , 2010 .

[3]  Alexandrina Untaroiu,et al.  Design of Experiments to Investigate Geometric Effects on Fluid Leakage Rate in a Balance Drum Seal , 2014 .

[4]  Klaus Brun,et al.  Fundamental Analysis of the Secondary Flows and Jet-Wake in a Torque Converter Pump—Part I: Model and Flow in a Rotating Passage , 2005 .

[5]  E. Ejiri,et al.  Influence of the Flatness Ratio of an Automotive Torque Converter on Hydrodynamic Performance , 1999 .

[6]  Pablo De la Fuente,et al.  Numerical Analysis into the Effects of the Unsteady Flow in an Automotive Hydrodynamic Torque Converter , 2011 .

[7]  Masashi Kato,et al.  Development of Super Ultra Flat Torque Converter with Multi Plate Lock-up Clutch , 2009 .

[8]  A. Kęsy,et al.  Construction optimization of hydrodynamic torque converter with application of genetic algorithm , 2011 .

[9]  Alexandrina Untaroiu,et al.  Hole-Pattern Seals Performance Evaluation Using Computational Fluid Dynamics and Design of Experiment Techniques , 2014 .

[10]  G. Bois,et al.  Numerical Torque Converter Performance Predictions: Validation and Application to a Rapid One Dimensional Approach , 2005 .

[11]  K. Yu,et al.  Profile Design and Multifidelity Optimization of Solid Rocket Motor Nozzle , 2014 .

[12]  Wei Wei.  Numerical simulation of the flow field of a flat torque converter , 2012 .

[13]  Kalyanmoy Deb,et al.  Muiltiobjective Optimization Using Nondominated Sorting in Genetic Algorithms , 1994, Evolutionary Computation.

[14]  Kalyanmoy Deb,et al.  AMGA: an archive-based micro genetic algorithm for multi-objective optimization , 2008, GECCO '08.

[15]  Wei Wei.  Effect of Blade Number on Performance of Torque Converter and Its Optimization Based on DOE and Response Surface Methodology , 2012 .

[16]  Klaus Brun,et al.  Fundamental Analysis of the Secondary Flows and Jet-Wake in a Torque Converter Pump—Part II: Flow in a Curved Stationary Passage and Combined Flows , 2005 .

[17]  Yong Wang,et al.  Multicondition Optimization and Experimental Measurements of a Double-Blade Centrifugal Pump Impeller. , 2013, Journal of fluids engineering.

[18]  Alexandrina Untaroiu,et al.  Constrained Design Optimization of Rotor-Tilting Pad Bearing , 2010 .