Design Optimization of Fixed-Valve Micropumps for Miniature Cooling Systems

The piezoelectrically driven fixed-valve micropump may be an attractive choice for miniature liquid cooling systems due to its low-cost potential and simple fabrication. The thin, stackable design can be fabricated in many materials, including silicon, metal and plastic. Previous linear system modeling has been used to predict resonant behavior in terms of valve Reynolds number and used as a guideline for design, but can not yield predictions of pressure and flow, which depend on nonlinear fluid dynamic phenomena. In this study we report an extended model that incorporates the calculation of block-load pressure and no-load flow in a manner such that thousands of designs can be analyzed quickly. The results indicate that by calculating these two pump performance parameters over a design space of valve size and actuator stiffness, pump design is better able to match pump performance to system requirements. Experimental verification was performed using prototype pumps with interchangeable plastic and metal parts to demonstrate the approach for these two low cost materials.Copyright © 2007 by ASME

[1]  Christopher J. Morris,et al.  Optimization of a circular piezoelectric bimorph for a micropump driver , 2000 .

[2]  T Gerlach,et al.  A new micropump principle of the reciprocating type using pyramidic micro flowchannels as passive valves , 1995 .

[3]  Debra M. Gilbuena,et al.  Fixed Valve Piezoelectric Micropump for Miniature Thermal Management Module , 2006 .

[4]  F. Forster,et al.  ELECTRONIC COOLING SYSTEMS BASED ON FIXED-VALVE MICROPUMP NETWORKS , 2004 .

[5]  G. Stemme,et al.  A valveless diffuser/nozzle-based fluid pump , 1993 .

[6]  Jens Anders Branebjerg,et al.  Microfluidics-a review , 1993 .

[7]  Christopher J. Morris,et al.  Low-order modeling of resonance for fixed-valve micropumps based on first principles , 2003 .

[8]  Martin A. Afromowitz,et al.  DESIGN, FABRICATION AND TESTING OF FIXED-VALVE MICRO-PUMPS , 1995 .

[9]  Christopher J. Morris,et al.  Improvements in Fixed-Valve Micropump Performance Through Shape Optimization of Valves , 2005 .

[10]  E. Stemme,et al.  A Valve-less Planar Pump In Silicon , 1995, Proceedings of the International Solid-State Sensors and Actuators Conference - TRANSDUCERS '95.

[11]  Brian E. Williams,et al.  Parametric Design of Fixed-Geometry Microvalves: The Tesser Valve , 2002 .

[12]  F. Forster,et al.  Oscillatory flow in microchannels Comparison of exact and approximate impedance models with experiments , 2004 .

[13]  Juan G. Santiago,et al.  A review of micropumps , 2004 .

[14]  F. Forster,et al.  Is There a Best Fixed-Geometry Valve for Micropumps? , 2004 .