Monte Carlo Analysis of Circulating Currents in Random-Wound Electrical Machines
暂无分享,去创建一个
Antero Arkkio | Anouar Belahcen | Antti Lehikoinen | Erkki Lantto | Nicola Chiodetto | A. Belahcen | A. Arkkio | E. Lantto | N. Chiodetto | A. Lehikoinen
[1] N. Takahashi,et al. Circulating current computation and transposition design for large current winding of transformer with multi-section strategy and hybrid optimal method , 2000 .
[2] Jacek F. Gieras,et al. Performance Calculation for a High-Speed Solid-Rotor Induction Motor , 2012, IEEE Transactions on Industrial Electronics.
[3] Antero Arkkio,et al. Efficient Finite-Element Computation of Circulating Currents in Thin Parallel Strands , 2016, IEEE Transactions on Magnetics.
[4] J. Gyselinck,et al. Time-Domain Homogenization of Windings in 3-D Finite Element Models , 2008, IEEE Transactions on Magnetics.
[5] G. Jewell,et al. Proximity Loss Study In High Speed Flux-Switching Permanent Magnet Machine , 2009, IEEE Transactions on Magnetics.
[6] Jacques Lobry,et al. High-Frequency Multi-Winding Magnetic Components: From Numerical Simulation to Equivalent Circuits With Frequency-Independent RL Parameters , 2014, IEEE Transactions on Magnetics.
[7] A. Arkkio,et al. Time-harmonic finite-element analysis of eddy currents in the form-wound stator winding of a cage induction motor , 2007 .
[8] H. V. Khang,et al. Eddy-Current Loss Modeling for a Form-Wound Induction Motor Using Circuit Model , 2012, IEEE Transactions on Magnetics.
[9] Mohammad Jahirul Islam. Finite-element analysis of eddy currents in the form-wound multi-conductor windings of electrical machines , 2010 .
[10] Yanping Liang,et al. Circuit Network Model of Stator Transposition Bar in Large Generators and Calculation of Circulating Current , 2015, IEEE Transactions on Industrial Electronics.
[11] A. Mesrobian,et al. Random wound versus form wound on low voltage synchronous generators , 1990, 37th Annual Conference on Petroleum and Chemical Industry.
[12] G. Meunier,et al. Modeling of Losses and Current Density Distribution in Conductors of a Large Air-Gap Transformer Using Homogenization and 3-D FEM , 2012, IEEE Transactions on Magnetics.
[13] H. V. Khang,et al. Eddy-Current Loss and Temperature Rise in the Form-Wound Stator Winding of an Inverter-Fed Cage Induction Motor , 2010, IEEE Transactions on Magnetics.
[14] Enrique Mombello,et al. Semianalytic Integral Method for Fast Solution of Current Distribution in Foil Winding Transformers , 2015, IEEE Transactions on Magnetics.
[15] A. Arkkio,et al. Identification of Electromagnetic Torque Model for Induction Machines With Numerical Magnetic Field Solution , 2008, IEEE Transactions on Magnetics.
[16] J. Gyselinck,et al. Frequency-domain homogenization of bundles of wires in 2-D magnetodynamic FE calculations , 2005, IEEE Transactions on Magnetics.
[17] M. Albach,et al. Optimized Winding Layout for Minimized Proximity Losses in Coils With Rod Cores , 2008, IEEE Transactions on Magnetics.
[18] Fang Jiancheng,et al. Analysis of Circulating Current Loss for High-Speed Permanent Magnet Motor , 2015, IEEE Transactions on Magnetics.
[19] Jun Yoshida,et al. Calculation method of circulating current in parallel armature windings in consideration of magnetic circuit , 2013, 2013 IEEE Power & Energy Society General Meeting.
[20] Antti Lehikoinen,et al. Spectral Stochastic Finite Element Method for Electromagnetic Problems with Random Geometry , 2014 .
[21] David G. Dorrell,et al. Proximity Losses in the Windings of High Speed Brushless Permanent Magnet AC Motors With Single Tooth Windings and Parallel Paths , 2013, IEEE Transactions on Magnetics.
[22] Johan Gyselinck,et al. Homogenization of Form-Wound Windings in Frequency and Time Domain Finite-Element Modeling of Electrical Machines , 2010, IEEE Transactions on Magnetics.
[23] Antero Arkkio,et al. Electromagnetic forces caused by cage induction motor , 2000 .
[24] Annie Gagnoud,et al. 3-D Multistrands Inductor Modeling: Influence of Complex Geometrical Arrangements , 2014, IEEE Transactions on Magnetics.
[25] Srdjan Lukic,et al. Computationally-Efficient, Generalized Expressions for the Proximity-Effect in Multi-Layer, Multi-Turn Tubular Coils for Wireless Power Transfer Systems , 2013, IEEE Transactions on Magnetics.
[26] Valéria Hrabovcová,et al. Design of Rotating Electrical Machines , 2009 .
[27] Juha Pyrhonen,et al. AC Resistance Factor in One-Layer Form-Wound Winding Used in Rotating Electrical Machines , 2013, IEEE Transactions on Magnetics.
[28] J. Gyselinck,et al. Time-Domain Homogenization of Windings in 2-D Finite Element Models , 2007, IEEE Transactions on Magnetics.
[29] Antero Arkkio,et al. Analysis of induction motors based on the numerical solution of the magnetic field and circuit equations , 1987 .
[30] Alberto Tessarolo. Leakage Field Analytical Computation in Semiclosed Slots of Unsaturated Electric Machines , 2015, IEEE Transactions on Energy Conversion.
[31] Jan A. Ferreira,et al. Current Sharing Analysis of Parallel Strands in Low-Voltage High-Speed Machines , 2014, IEEE Transactions on Industrial Electronics.
[32] Xie Dexin,et al. Optimal transposition design of transformer windings by Genetic Algorithms , 1995 .
[33] A. Tessarolo,et al. Use of Time-Harmonic Finite-Element Analysis to Compute Stator Winding Eddy-Current Losses Due to Rotor Motion in Surface Permanent-Magnet Machines , 2012, IEEE Transactions on Energy Conversion.
[34] Antero Arkkio,et al. Time-stepping finite-element analysis of eddy currents in the form-wound stator winding of a cage induction motor supplied from a sinusoidal voltage source , 2008 .
[35] J. Roudet,et al. Modeling and Computation of Losses in Conductors and Magnetic Cores of a Large Air Gap Transformer Dedicated to Contactless Energy Transfer , 2013, IEEE Transactions on Magnetics.
[36] H. V. Khang,et al. Loss Minimization for Form-Wound Stator Winding of a High-Speed Induction Motor , 2012, IEEE Transactions on Magnetics.
[37] Jussi Lähteenmäki,et al. Design and voltage supply of high-speed induction machines , 2002 .