Miniaturized Flexible Piezoresistive Pressure Sensors: Poly(3,4-ethylenedioxythiophene):Poly(styrenesulfonate) Copolymers Blended with Graphene Oxide for Biomedical Applications.

Piezoresistive pressure sensors have garnered significant attention because of their wide applications in automobiles, intelligent buildings, and biomedicine. For in-vivo testing, the size of pressure sensors is a vital factor to monitor the pressure of specific portions of a human body. Therefore, the primary focus of this study is to miniaturize piezoresistive pressure sensors with graphene oxide (GO)-incorporated poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) composite films on a flexible substrate for biomedical applications. Prior to the fabrication of pressure sensors, a comprehensive material analysis was applied to identify the horizontal placement of GO flakes within the PEDOT:PSS copolymers, revealing a reduction in variable range hopping (VRH) distance and an enhancement in carrier mobility. For devices scaled to 0.2 cm, the sensitivity of the PEDOT:PSS pressure sensors was conspicuously decreased owing to the late response, which can be effectively solved by GO incorporation. Using technology computer-aided design (TCAD) simulations, the current crowded at the PEDOT:PSS film surface and in the vicinity of an indium-tin-oxide (ITO) electrode corner was found to be responsible for the changes in piezoresistive behaviors of the scaled devices. The miniaturized flexible piezoresistive pressure sensors with PEDOT:PSS/GO composite films are capable of monitoring the brain pressure of intracranial surgery of a rat and discerning different styles of music for a potential application in hearing aids.

[1]  Shean-Jen Chen,et al.  Graphene oxide-based nanomaterials for efficient photoenergy conversion , 2016, Journal of Materials Chemistry A.

[2]  Chun-Liang Lin,et al.  A Polymer-Based Capacitive Sensing Array for Normal and Shear Force Measurement , 2010, Sensors.

[3]  Da-Young Lee,et al.  Graphene oxide/PEDOT:PSS composite hole transport layer for efficient and stable planar heterojunction perovskite solar cells. , 2016, Nanoscale.

[4]  Y. Wada,et al.  DC Hall-effect measurement for inkjet-deposited films of poly(3,4-ethylenedioxythiophene)/poly(4-styrenesulfonate) by using microscale gap electrodes , 2016 .

[5]  Y. Gefen,et al.  Variable-range hopping conductivity in granular materials , 1983 .

[6]  Jin Jang,et al.  Enhanced organic photovoltaic properties via structural modifications in PEDOT:PSS due to graphene oxide doping , 2016 .

[7]  Stavros Chatzandroulis,et al.  A solid-state pressure-sensing microsystem for biomedical applications , 1997 .

[8]  R. Gilgenbach,et al.  Analysis of current crowding in thin film contacts from exact field solution , 2015 .

[9]  K. Tu,et al.  Numerical simulation of current crowding phenomena and their effects on electromigration in very large scale integration interconnects , 2000 .

[10]  René A. J. Janssen,et al.  Microscopic Understanding of the Anisotropic Conductivity of PEDOT:PSS Thin Films , 2007 .

[11]  S. Alkoy,et al.  Piezoelectric Sensors and Sensor Materials , 1998 .

[12]  David C. Martin,et al.  X-ray Photoelectron Spectroscopy Study of Counterion Incorporation in Poly(3,4-ethylenedioxythiophene) (PEDOT) 2: Polyanion Effect, Toluenesulfonate, and Small Anions , 2010 .

[13]  Patrick Pons,et al.  Intrinsic thermal behaviour of capacitive pressure sensors: mechanisms and minimisation , 2000 .

[14]  Ming‐Chung Wu,et al.  Nitrogen Plasma Surface Modification of Poly(3,4-ethylenedioxythiophene):Poly(styrenesulfonate) Films To Enhance the Piezoresistive Pressure-Sensing Properties , 2016 .

[15]  S. Mannsfeld,et al.  Quantitative determination of organic semiconductor microstructure from the molecular to device scale. , 2012, Chemical reviews.

[16]  Kun Zhang,et al.  Comparison of reduction products from graphite oxide and graphene oxide for anode applications in lithium-ion batteries and sodium-ion batteries. , 2017, Nanoscale.

[17]  Variable-range hopping in quasi-one-dimensional electron crystals , 2003, cond-mat/0307299.

[18]  Yensil Park,et al.  Graphene oxide/PEDOT:PSS and reduced graphene oxide/PEDOT:PSS hole extraction layers in organic photovoltaic cells , 2012 .

[19]  Antonino S. Fiorillo,et al.  A piezoresistive tactile sensor , 1997 .

[20]  P. Zambonin,et al.  Poly(alkoxyphenylene-thienylene) Langmuir-Schäfer thin films for advanced performance transistors , 2006 .

[21]  Kuo-Chen Wei,et al.  Characterization of Piezoresistive PEDOT:PSS Pressure Sensors with Inter-Digitated and Cross-Point Electrode Structures , 2015, Sensors.

[22]  Elisabetta Farella,et al.  Force Sensing Resistor and Evaluation of Technology for Wearable Body Pressure Sensing , 2016, J. Sensors.

[23]  Wei Meng,et al.  Optical properties and conductivity of PEDOT:PSS films treated by polyethylenimine solution for organic solar cells , 2015 .

[24]  Cédric Cochrane,et al.  PEDOT:PSS-Based Piezo-Resistive Sensors Applied to Reinforcement Glass Fibres for in Situ Measurement during the Composite Material Weaving Process , 2013, Sensors.

[25]  Giovanni Saggio,et al.  Piezoresistive behaviour of flexible PEDOT:PSS based sensors , 2009 .

[26]  Yue Bai,et al.  Study of Multi-level Characteristics for 3D Vertical Resistive Switching Memory , 2014, Scientific reports.

[27]  T. Maudie,et al.  Pressure sensor performance and reliability , 1997 .

[28]  Shiqiao Qin,et al.  Fabrication of pH-sensitive graphene oxide–drug supramolecular hydrogels as controlled release systems , 2012 .

[29]  R. Ruoff,et al.  The chemistry of graphene oxide. , 2010, Chemical Society reviews.

[30]  Da Chen,et al.  Graphene oxide: preparation, functionalization, and electrochemical applications. , 2012, Chemical reviews.

[31]  Bernard Kippelen,et al.  Area-scaling of organic solar cells , 2009 .

[32]  Yichun Ding,et al.  Flexible and Compressible PEDOT:PSS@Melamine Conductive Sponge Prepared via One-Step Dip Coating as Piezoresistive Pressure Sensor for Human Motion Detection. , 2018, ACS applied materials & interfaces.

[33]  L. J. V. D. Pauw.  A METHOD OF MEASURING SPECIFIC RESISTIVITY AND HALL EFFECT OF DISCS OF ARBITRARY SHAPE , 1991 .

[34]  Hiroyasu Masunaga,et al.  PEDOT Nanocrystal in Highly Conductive PEDOT:PSS Polymer Films , 2012 .

[35]  Beth L. Pruitt,et al.  Review: Semiconductor Piezoresistance for Microsystems , 2009, Proceedings of the IEEE.

[36]  S. Nespurek,et al.  A spectroscopic study for the application of a PEDOT-type material as buffer layer in electronic devices , 2010 .

[37]  Yongsheng Chen,et al.  Composition and structure control of ultralight graphene foam for high-performance microwave absorption , 2016 .

[38]  Rajat Subhra Karmakar,et al.  Cross-Talk Immunity of PEDOT:PSS Pressure Sensing Arrays with Gold Nanoparticle Incorporation , 2017, Scientific Reports.

[39]  D. Briggs,et al.  XPS studies of the oxygen 1S and 2s levels in a wide range of functional polymers , 1993 .

[40]  Probing the Thermal Deoxygenation of Graphene Oxide Using High-Resolution In Situ X-ray-Based Spectroscopies , 2011, 1108.5911.

[41]  Hongngee Lim,et al.  In-situ electrochemically deposited polypyrrole nanoparticles incorporated reduced graphene oxide as an efficient counter electrode for platinum-free dye-sensitized solar cells , 2014, Scientific Reports.

[42]  Sean P. Rigby,et al.  Review on graphene and its derivatives: Synthesis methods and potential industrial implementation , 2019, Journal of the Taiwan Institute of Chemical Engineers.

[43]  Yafei Zhang,et al.  Three-dimensional chemically reduced graphene oxide templated by silica spheres for ammonia sensing , 2017 .

[44]  C. Nuckolls,et al.  Device scaling in sub-100 nm pentacene field-effect transistors , 2006 .

[45]  Udo Lang,et al.  Piezoresistive properties of PEDOT: PSS , 2009 .

[46]  J. H. Oh,et al.  Wearable high-performance pressure sensors based on three-dimensional electrospun conductive nanofibers , 2018, NPG Asia Materials.

[47]  Y. Wada,et al.  Hall-effect Measurement of Organic Semiconductor Layers Using Micro-scale Electrode Chips , 2012 .

[48]  Anurat Wisitsoraat,et al.  Low cost thin film based piezoresistive MEMS tactile sensor , 2007 .

[49]  Boris I Shklovskii,et al.  Coulomb gap and low temperature conductivity of disordered systems , 1975 .

[50]  S. Arora,et al.  Characterization of doped PEDOT: PSS and its influence on the performance and degradation of organic solar cells , 2014 .

[51]  John R. Reynolds,et al.  Handbook of Conducting Polymers, 2 Volume Set , 2007 .

[52]  X. Ren,et al.  Graphene-oxide doped PEDOT:PSS as a superior hole transport material for high-efficiency perovskite solar cell , 2017 .

[53]  R. Dauskardt,et al.  An ultra-sensitive resistive pressure sensor based on hollow-sphere microstructure induced elasticity in conducting polymer film , 2014, Nature Communications.

[54]  R. Latonen,et al.  Electrochemical synthesis of poly(3,4-ethylenedioxythiophene) in aqueous dispersion of high porosity reduced graphene oxide , 2014 .

[55]  S. Y. Kim,et al.  Ammonia‐Sensing Using a Composite of Graphene Oxide and Conducting Polymer , 2018 .

[56]  Dongqing Wu,et al.  Highly conductive and uniform graphene oxide modified PEDOT:PSS electrodes for ITO-Free organic light emitting diodes , 2014 .

[57]  Yanwu Zhu,et al.  A Hierarchical Carbon Derived from Sponge‐Templated Activation of Graphene Oxide for High‐Performance Supercapacitor Electrodes , 2016, Advanced materials.