Effect of addition of graphite particulates on the wear behaviour in aluminium–silicon carbide–graphite composites

Abstract Aluminium matrix composites with multiple reinforcements (hybrid AMCs) are finding increased applications because of improved mechanical and tribological properties and hence are better substitutes for single reinforced composites. Few investigations have been reported on the tribological behaviour of these composites with % reinforcement above 10%. The present study focuses on the influence of addition of graphite (Gr) particulates as a second reinforcement on the tribological behaviour of aluminium matrix composites reinforced with silicon carbide (SiC) particulates. Dry sliding wear tests have been performed to study the influence of Gr particulates, load, sliding speed and sliding distance on the wear of hybrid composite specimens with combined % reinforcement of 2.5%, 5%, 7.5% and 10% with equal weight % of SiC and Gr particulates. Experiments are also conducted on composites with % reinforcement of SiC similar to hybrid composites for the sake of comparison. Parametric studies based on design of experiments (DOE) techniques indicate that the wear of hybrid composites decreases from 0.0234 g to 0.0221 g as the % reinforcement increases from 3% to 7.5%. But the wear has a tendency to increase beyond % reinforcement of 7.5% as its value is 0.0225 g at.% reinforcement of 10%. This trend is absent in case of composites reinforced with SiC alone. The values of wear of these composites are 0.0323 g, 0.0252 g and 0.0223 g, respectively, at.% reinforcement of 3%, 7.5% and 10% clearly indicating that hybrid composites exhibit better wear characteristics compared to composites reinforced with SiC alone. Load and sliding distance show a positive influence on wear implying increase of wear with increase of either load or sliding distance or both. Whereas speed shows a negative influence on wear indicating decrease of wear with increase of speed. Interactions among load, sliding speed and sliding distance are noticed in hybrid composites and this may be attributed to the addition of Gr particulates. Such interactions are not present in composite reinforced with SiC alone. Mathematical models are formulated to predict the wear of the composites.