Fully physical time-dependent compact thermal modelling of complex non linear 3-dimensional systems for device and circuit level electro-thermal CAD

An fully analytical spectral domain decomposition approach to solution of the nonlinear time-dependent heat diffusion equation in complex volumes is introduced. Its application to device/circuit level electro-thermal simulation on CAD timescales is illustrated. The full treatment in coupled electro-thermal CAD of thermal nonlinearity due to temperature dependent diffusivity is described. Thermal solutions are presented in the form of thermal impedance matrix expressions for thermal subsystems. These include double Fourier series solutions for rectangular multilayers, which are an order of magnitude faster to evaluate than existing semi-analytical Fourier solutions based on DFT-FFT. They also include double Fourier series solutions for arbitrarily distributed volume heat sources and sinks, constructed without use of Green's function techniques, and for rectangular volumes with prescribed fluxes on all faces. These analytical solutions allow treatment of arbitrary device structures without invoking conventional numerical methods. They provide minimal boundary condition independent compact thermal models, allowing CAD timescale coupled electro-thermal solution for complex systems, without requiring lumped element RC network extraction or node reduction. The time-independent thermal resistance matrix description of device structure is illustrated by a fully physical, coupled electro-thermal study of the interaction of substrate thickness and surface convection in power HEMTs. The thermal time-dependent implementation is illustrated by circuit level harmonic balance simulation of a 3/spl times/3 MMIC amplifier array.

[1]  C.E. Christoffersen,et al.  Global electrothermal CAD of complex nonlinear 3-D systems based on a fully physical time-dependent compact thermal model , 2001, 2001 IEEE MTT-S International Microwave Sympsoium Digest (Cat. No.01CH37157).

[2]  Gordon N. Ellison.  Thermal analysis of microelectric packages and printed circuit boards using an analytic solution to the heat conduction equation , 1995 .

[3]  Marta Rencz,et al.  SUNRED: a new field solving approach , 1999, Design, Test, Integration, and Packaging of MEMS/MOEMS.

[4]  A. J. Panks,et al.  Fully physical coupled electro-thermal simulations and measurements of power FETs , 2000, 2000 IEEE MTT-S International Microwave Symposium Digest (Cat. No.00CH37017).

[5]  A. I. Khalil,et al.  Global modeling of spatially distributed microwave and millimeter-wave systems , 1999 .

[6]  A. J. Panks,et al.  Electro-thermal modelling and measurement of thermal time constants and natural convection in spatial power combining grid arrays , 2000, 2000 IEEE MTT-S International Microwave Symposium Digest (Cat. No.00CH37017).

[7]  Donald C. Price,et al.  Adaptive Modeling of the Transients of Submicron Integrated Circuits , 1998 .

[8]  Christopher M. Snowden,et al.  Large-signal microwave characterization of AlGaAs/GaAs HBT's based on a physics-based electrothermal model , 1997 .

[9]  V. Székely,et al.  THERMODEL: a tool for compact dynamic thermal model generation , 1998 .

[10]  A. J. Panks,et al.  Fully coupled electro-thermal simulation of MMICs and MMIC arrays based on a physical model , 1999, 1999 IEEE MTT-S International Microwave Symposium Digest (Cat. No.99CH36282).

[11]  V. Szekely,et al.  Identification of RC networks by deconvolution: chances and limits , 1998 .

[12]  W. B. Joyce,et al.  Thermal resistance of heat sinks with temperature-dependent conductivity , 1975 .

[13]  Márta Rencz,et al.  Electro-thermal and logi-thermal simulation of VLSI designs , 1997, IEEE Trans. Very Large Scale Integr. Syst..

[14]  C. Snowden,et al.  Electro-thermal device and circuit simulation with thermal nonlinearity due to temperature dependent diffusivity , 2000 .

[15]  Christopher M. Snowden,et al.  Quasi-two-dimensional MESFET simulations for CAD , 1989 .

[16]  Carlos Christoffersen,et al.  Object oriented microwave circuit simulation , 2000 .

[17]  V. Székely,et al.  Accurate algorithm for temperature calculation of devices in nonlinear-circuit-analysis programs , 1972 .

[18]  Marta Rencz,et al.  An efficient thermal simulation tool for ICs, microsystem elements and MCMs: the μS-THERMANAL , 1998 .

[19]  A. J. Panks,et al.  Electrothermal modeling and measurement for spatial power combining at millimeter wavelengths , 1999 .

[20]  M.-N. Sabry,et al.  Static and dynamic thermal modeling of ICs , 1999 .

[21]  Fabrizio Bonani,et al.  On the application of the Kirchhoff transformation to the steady-state thermal analysis of semiconductor devices with temperature-dependent and piecewise inhomogeneous thermal conductivity , 1995 .

[22]  C. Snowden,et al.  A physics-based electro-thermal model for microwave and millimetre wave HEMTs , 1997, 1997 IEEE MTT-S International Microwave Symposium Digest.

[23]  Roger D. Pollard,et al.  A large-signal physical HEMT model , 1996, 1996 IEEE MTT-S International Microwave Symposium Digest.

[24]  J. Vlach,et al.  Computation of time domain response by numerical inversion of the Laplace transform , 1975 .

[25]  L. Rosenhead.  Conduction of Heat in Solids , 1947, Nature.

[26]  Carlos Alberto Brebbia,et al.  The dual reciprocity boundary element formulation for diffusion problems , 1987 .

[27]  Christopher M. Snowden,et al.  Electro-thermal Modelling of Monolithic and Hybrid Microwave and Millimeter Wave IC's , 2000, VLSI Design.

[28]  M.-N. Sabry,et al.  A lumped transient thermal model for self-heating in MOSFETs , 2001 .

[29]  Christopher M. Snowden,et al.  Predictive microwave device design by coupled electro-thermal simulation based on a fully physical thermal model , 2000, 8th IEEE International Symposium on High Performance Electron Devices for Microwave and Optoelectronic Applications (Cat. No.00TH8534).

[30]  A. J. Panks,et al.  Thermal transients in microwave active devices and their influence on intermodulation distortion , 2001, 2001 IEEE MTT-S International Microwave Sympsoium Digest (Cat. No.01CH37157).

[31]  A. J. Panks,et al.  Electro-thermal modelling of microwave transistors and MMICs for optimised transient and steady-state performance , 2000, 8th IEEE International Symposium on High Performance Electron Devices for Microwave and Optoelectronic Applications (Cat. No.00TH8534).

[32]  A. Haji-sheikh,et al.  Heat Conduction Using Green's Function , 1992 .

[33]  Rogério Martins Saldanha da Gama.  A linear scheme for simulating conduction heat transfer problems with nonlinear boundary conditions , 1997 .

[34]  P. Leturcq,et al.  Three-dimensional thermal modeling based on the two-port network theory for hybrid or monolithic integrated power circuits , 1996 .

[35]  Michel S. Nakhla,et al.  Mixed frequency/time domain analysis of nonlinear circuits , 1992, IEEE Trans. Comput. Aided Des. Integr. Circuits Syst..

[36]  Carlos Christoffersen,et al.  An integrated environment for the simulation of electrical, thermal and electromagnetic interactions in high-performance integrated circuits , 1999, IEEE 8th Topical Meeting on Electrical Performance of Electronic Packaging (Cat. No.99TH8412).

[37]  Song-Ping Zhu,et al.  An application of the LTDRM to transient diffusion problems with nonlinear material properties and nonlinear boundary conditions , 1997 .

[38]  P. Stehouwer,et al.  Creation and evaluation of compact models for thermal characterisation using dedicated optimisation software , 1999, Fifteenth Annual IEEE Semiconductor Thermal Measurement and Management Symposium (Cat. No.99CH36306).

[39]  V. Szekely,et al.  Simulation, testing and modeling of the thermal behavior and electro-thermal interactions in ICs, MCMs and PWBs , 1999, 1999 Southwest Symposium on Mixed-Signal Design (Cat. No.99EX286).

[40]  Mark J. W. Rodwell,et al.  State-variable-based transient analysis using convolution , 1999 .

[41]  Alessandra Costanzo,et al.  Three-dimensional computation of the thermal parameters of multiple-gate power FETs , 1993, 1993 23rd European Microwave Conference.

[42]  James S. Wilson,et al.  Transient Adaptive Thermal Simulation of Microwave Integrated Circuits , 1998, Fourteenth Annual IEEE Semiconductor Thermal Measurement and Management Symposium (Cat. No.98CH36195).

[43]  P. Webb.  Thermal modeling of power gallium arsenide microwave integrated circuits , 1993 .

[44]  S. Lindenkreuz,et al.  Fully coupled dynamic electro-thermal simulation , 1997, IEEE Trans. Very Large Scale Integr. Syst..

[45]  C. Snowden,et al.  An investigation of breakdown in power HEMTs and MESFETs utilising an advanced temperature-dependent physical model , 1998, Compound Semiconductors 1997. Proceedings of the IEEE Twenty-Fourth International Symposium on Compound Semiconductors.

[46]  A. G. Kokkas.  Thermal analysis of multiple-layer structures , 1974 .

[47]  P. W. Webb,et al.  Thermal simulation of transients in microwave devices , 1991 .

[48]  Marco Pirola,et al.  Thermal CAD for power III-V devices and MMICs , 1995, Proceedings of 1995 SBMO/IEEE MTT-S International Microwave and Optoelectronics Conference.

[49]  M. Rencz,et al.  An alternative method for electro-thermal circuit simulation , 1999, 1999 Southwest Symposium on Mixed-Signal Design (Cat. No.99EX286).