Self-repairing membranes for inflatable structures inspired by a rapid wound sealing process of climbing plants

A new self-repairing membrane for inflatable light weight structures such as rubber boats or Tensairity® constructions is presented. Inspired by rapid self-sealing processes in plants, a thin soft cellular polyurethane foam coating is applied on the inside of a fabric substrate, which closes the fissure if the membrane is punctured with a spike. Experimental tests are carried out with a purpose built setup by measuring the air mass flow through a leak in a damaged membrane sample. It is shown that the weight per unit area of the self-repairing foam as well as the curing of the two component PU-foam under an overpressure influence the repair efficiency. Curing the foam under overpressure affects the relative density as well as the microstructure of the foam coatings. Maximal median repair efficiencies of 0.999 have been obtained with 0.16 g·cm−2 foam cured at 1 bar overpressure. These results suggest that the bio-inspired technique has the potential to extend the functional integrity of injured inflatable structures dramatically.

[1]  Thomas Speck,et al.  Morphological aspects of self-repair of lesions caused by internal growth stresses in stems of Aristolochia macrophylla and Aristolochia ringens , 2010, Proceedings of the Royal Society B: Biological Sciences.

[2]  N. Sottos,et al.  Autonomic healing of polymer composites , 2001, Nature.

[3]  Thomas Speck,et al.  Quantitative and qualitative changes in primary and secondary stem organization of Aristolochia macrophylla during ontogeny: functional growth analysis and experiments , 2008, Journal of experimental botany.

[4]  Michael R. Kessler,et al.  Self-healing: A new paradigm in materials design , 2007 .

[5]  Olga Speck,et al.  Self-healing Processes In Nature AndEngineering: Self-repairing BiomimeticMembranes For Pneumatic Structures , 2006 .

[6]  Naoki Takano,et al.  Intelligent Material Systems Using Epoxy Particles to Repair Microcracks and Delamination Damage in GFRP , 1999 .

[7]  K. Nagaya,et al.  Tire with Self-Repairing Mechanism , 2006 .

[8]  R S Trask,et al.  Bioinspired engineering study of Plantae vascules for self-healing composite structures , 2010, Journal of The Royal Society Interface.

[9]  N. Sottos,et al.  Fracture testing of a self-healing polymer composite , 2002 .

[10]  N. Sottos,et al.  Microcapsule induced toughening in a self-healing polymer composite , 2004 .

[11]  U. Vaidya,et al.  Parametric studies on self-repairing approaches for resin infused composites subjected to low velocity impact , 1999 .

[12]  Bharat Bhushan,et al.  Biomimetics: lessons from nature–an overview , 2009, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[13]  N. Sottos,et al.  Retardation and repair of fatigue cracks in a microcapsule toughened epoxy composite—Part II: In situ self-healing , 2005 .

[14]  I. Bond,et al.  Biomimetic self-healing of advanced composite structures using hollow glass fibres , 2006 .

[15]  Thomas Speck,et al.  The Potential of Plant biomechanics in functional biology and systematics , 2003 .

[16]  Rolf H. Luchsinger,et al.  Pressure induced stability: from pneumatic structures to Tensairity® , 2004 .

[17]  R S Trask,et al.  Self-healing polymer composites: mimicking nature to enhance performance , 2007, Bioinspiration & biomimetics.

[18]  Mauro Pedretti,et al.  Tensairity‐Patent – Eine pneumatische Tenso‐Struktur , 2007 .

[19]  N. Sottos,et al.  In situ poly(urea-formaldehyde) microencapsulation of dicyclopentadiene , 2003, Journal of microencapsulation.

[20]  N. Sottos,et al.  Retardation and repair of fatigue cracks in a microcapsule toughened epoxy composite – Part I: Manual infiltration , 2005 .

[21]  N. Sottos,et al.  In situ poly(urea-formaldehyde) microencapsulation of dicyclopentadiene , 2003 .

[22]  Carolyn M. Dry,et al.  Procedures developed for self-repair of polymer matrix composite materials , 1996 .

[23]  J. Lewis,et al.  Self-healing materials with microvascular networks. , 2007, Nature materials.

[24]  I. Bond,et al.  'Bleeding composites' - damage detection and self-repair using a biomimetic approach , 2005 .

[25]  T. Speck,et al.  Analysis of self‐repair mechanisms of Phaseolus vulgaris var. saxa using near‐infrared surface‐enhanced Raman spectroscopy , 2009 .

[26]  Thomas C. Ward,et al.  Self-Healing of Poly(Ethylene-co-Methacrylic Acid) Copolymers Following Projectile Puncture , 2007 .