Intragranular cracking as a critical barrier for high-voltage usage of layer-structured cathode for lithium-ion batteries

LiNi1/3Mn1/3Co1/3O2-layered cathode is often fabricated in the form of secondary particles, consisting of densely packed primary particles. This offers advantages for high energy density and alleviation of cathode side reactions/corrosions, but introduces drawbacks such as intergranular cracking. Here, we report unexpected observations on the nucleation and growth of intragranular cracks in a commercial LiNi1/3Mn1/3Co1/3O2 cathode by using advanced scanning transmission electron microscopy. We find the formation of the intragranular cracks is directly associated with high-voltage cycling, an electrochemically driven and diffusion-controlled process. The intragranular cracks are noticed to be characteristically initiated from the grain interior, a consequence of a dislocation-based crack incubation mechanism. This observation is in sharp contrast with general theoretical models, predicting the initiation of intragranular cracks from grain boundaries or particle surfaces. Our study emphasizes that maintaining structural stability is the key step towards high-voltage operation of layered-cathode materials.

[1]  Yizhou Zhu,et al.  Visualizing non-equilibrium lithiation of spinel oxide via in situ transmission electron microscopy , 2016, Nature Communications.

[2]  Steven M. George,et al.  Effect of Al2O3 Coating on Stabilizing LiNi0.4Mn0.4Co0.2O2 Cathodes , 2015 .

[3]  Y. S. Meng,et al.  Topological defect dynamics in operando battery nanoparticles , 2015, Science.

[4]  Daniel P. Abraham,et al.  Observation of Microstructural Evolution in Li Battery Cathode Oxide Particles by In Situ Electron Microscopy , 2013 .

[5]  Yong‐Mook Kang,et al.  A Layer‐Structured Electrode Material Reformed by a PO4‐O2 Hybrid Framework toward Enhanced Lithium Storage and Stability , 2016 .

[6]  Claus Daniel,et al.  A study of lithium ion intercalation induced fracture of silicon particles used as anode material in Li-ion battery , 2011 .

[7]  Daniel P. Abraham,et al.  Stress Evolution in Lithium-ion Composite Electrodes during Electrochemical Cycling and Resulting Internal Pressures on the Cell Casing , 2015, 1511.02445.

[8]  Jun Ma,et al.  Tuning charge–discharge induced unit cell breathing in layer-structured cathode materials for lithium-ion batteries , 2014, Nature Communications.

[9]  R. Castillo,et al.  A joint experimental and theoretical study on the mechanisms of methyl 2-hydroxypropionate and methyl 2-hydroxyisobutyrate decomposition in the gas phase , 2004 .

[10]  M. Winter,et al.  Structural Changes in Li2MnO3 Cathode Material for Li‐Ion Batteries , 2014 .

[11]  Hsiao-Ying Shadow Huang,et al.  Dislocation Based Stress Developments in Lithium-Ion Batteries , 2012 .

[12]  S. Ferrari,et al.  Author contributions , 2021 .

[13]  Yang-Kook Sun,et al.  Nickel‐Rich and Lithium‐Rich Layered Oxide Cathodes: Progress and Perspectives , 2016 .

[14]  Haiyan Wang,et al.  Interface lattice displacement measurement to 1 pm by geometric phase analysis on aberration-corrected HAADF STEM images , 2013 .

[15]  Amartya Mukhopadhyay,et al.  Deformation and stress in electrode materials for Li-ion batteries , 2014 .

[16]  A. Manthiram,et al.  Comparison of the Electrochemical Behaviors of Stoichiometric LiNi1 / 3Co1 / 3Mn1 / 3 O 2 and Lithium Excess Li1.03 ( Ni1 / 3Co1 / 3Mn1 / 3 ) 0.97 O 2 , 2004 .

[17]  Helmut Ehrenberg,et al.  Understanding structural changes in NMC Li-ion cells by in situ neutron diffraction , 2014 .

[18]  Phl Peter Notten,et al.  Atomic layer deposition for nanostructured Li-ion batteries , 2012 .

[19]  Guoying Chen,et al.  Phosphorus Enrichment as a New Composition in the Solid Electrolyte Interphase of High-Voltage Cathodes and Its Effects on Battery Cycling , 2015 .

[20]  Feng Lin,et al.  Surface reconstruction and chemical evolution of stoichiometric layered cathode materials for lithium-ion batteries , 2014, Nature Communications.

[21]  R. McMeeking,et al.  Modeling Crack Growth during Li Extraction in Storage Particles Using a Fracture Phase Field Approach , 2016 .

[22]  Tsuyoshi Sasaki,et al.  Capacity-Fading Mechanisms of LiNiO2-Based Lithium-Ion Batteries II. Diagnostic Analysis by Electron Microscopy and Spectroscopy , 2009 .

[23]  K. Kang,et al.  Structural evolution of layered Li1.2Ni0.2Mn0.6O2 upon electrochemical cycling in a Li rechargeable battery , 2010 .

[24]  Xueliang Sun,et al.  Atomic layer deposition of solid-state electrolyte coated cathode materials with superior high-voltage cycling behavior for lithium ion battery application , 2014 .

[25]  J. Banhart,et al.  Structural changes in Li 2 MnO 3 cathode material for Li-ion batteries , 2013 .

[26]  Guoying Chen,et al.  Unravelling structural ambiguities in lithium- and manganese-rich transition metal oxides , 2015, Nature Communications.

[27]  V. Guliants,et al.  Quantitative Analysis of HAADF–STEM Images of MoVTeTaO M1 Phase Catalyst for Propane Ammoxidation to Acrylonitrile , 2015 .

[28]  Thomas J. Richardson,et al.  Electron Microscopy Study of the LiFePO4 to FePO4 Phase Transition , 2006 .

[29]  Yong Yang,et al.  The Effects of AlF3 Coating on the Performance of Li [ Li0.2Mn0.54Ni0.13Co0.13 ] O2 Positive Electrode Material for Lithium-Ion Battery , 2008 .

[30]  Z. Suo,et al.  Averting cracks caused by insertion reaction in lithium–ion batteries , 2010 .

[31]  Lin-Wang Wang,et al.  Facet development during platinum nanocube growth , 2014, Science.

[32]  Miaofang Chi,et al.  Identifying surface structural changes in layered Li-excess nickel manganese oxides in high voltage lithium ion batteries: A joint experimental and theoretical study , 2011 .

[33]  A. Sastry,et al.  Numerical Simulation of Stress Evolution in Lithium Manganese Dioxide Particles due to Coupled Phase Transition and Intercalation , 2011 .

[34]  K Ramesha,et al.  Origin of voltage decay in high-capacity layered oxide electrodes. , 2015, Nature materials.

[35]  L. S Etube.  Fracture Mechanics Analysis , 2014 .

[36]  Zonghai Chen,et al.  Development of microstrain in aged lithium transition metal oxides. , 2014, Nano letters.

[37]  Hiroyuki Kageyama,et al.  Changes in the structure and physical properties of the solid solution LiNi1−xMnxO2 with variation in its composition , 2003 .

[38]  Ji‐Guang Zhang,et al.  Corrosion/fragmentation of layered composite cathode and related capacity/voltage fading during cycling process. , 2013, Nano letters.

[39]  J. Tarascon,et al.  Visualization of O-O peroxo-like dimers in high-capacity layered oxides for Li-ion batteries , 2015, Science.

[40]  W. Craig Carter,et al.  “Electrochemical Shock” of Intercalation Electrodes: A Fracture Mechanics Analysis , 2010 .

[41]  A. Manthiram,et al.  Effects of Atomic Layer Deposition of Al2O3 on the Li[Li0.20Mn0.54Ni0.13Co0.13]O2 Cathode for Lithium-Ion Batteries , 2011 .

[42]  Xiao‐Qing Yang,et al.  A comparative study on structural changes of LiCo1/3Ni1/3Mn1/3O2 and LiNi0.8Co0.15Al0.05O2 during first charge using in situ XRD , 2006 .

[43]  K. Amine,et al.  Evolution of lattice structure and chemical composition of the surface reconstruction layer in Li(1.2)Ni(0.2)Mn(0.6)O2 cathode material for lithium ion batteries. , 2015, Nano letters.

[44]  M. Doeff,et al.  TEM Study of Fracturing in Spherical and Plate-like LiFePO4 Particles , 2008 .

[45]  Jianming Zheng,et al.  Formation of the spinel phase in the layered composite cathode used in Li-ion batteries. , 2012, ACS nano.

[46]  C. Liang,et al.  Probing the initiation of voltage decay in Li-rich layered cathode materials at the atomic scale , 2015 .

[47]  Lin Gu,et al.  Atomic‐Scale Structure Evolution in a Quasi‐Equilibrated Electrochemical Process of Electrode Materials for Rechargeable Batteries , 2015, Advanced materials.

[48]  Min Gyu Kim,et al.  A new coating method for alleviating surface degradation of LiNi0.6Co0.2Mn0.2O2 cathode material: nanoscale surface treatment of primary particles. , 2015, Nano letters.

[49]  Z. G. Wang,et al.  Controllable fatigue cracking mechanisms of copper bicrystals with a coherent twin boundary , 2014, Nature Communications.

[50]  Jie Xiao,et al.  Probing the Degradation Mechanism of Li2MnO3 Cathode for Li-Ion Batteries , 2015 .

[51]  Joachim Mayer,et al.  TEM Sample Preparation and FIB-Induced Damage , 2007 .

[52]  A. Mauger,et al.  Synthesis, structural, magnetic and electrochemical properties of LiNi1/3Mn1/3Co1/3O2 prepared by a sol–gel method using table sugar as chelating agent , 2013 .

[53]  Lei Cheng,et al.  Metal segregation in hierarchically structured cathode materials for high-energy lithium batteries , 2016, Nature Energy.

[54]  Feng Wu,et al.  Coralline Glassy Lithium Phosphate-Coated LiFePO4 Cathodes with Improved Power Capability for Lithium Ion Batteries , 2013 .

[55]  Bruno Scrosati,et al.  The Role of AlF3 Coatings in Improving Electrochemical Cycling of Li‐Enriched Nickel‐Manganese Oxide Electrodes for Li‐Ion Batteries , 2012, Advanced materials.

[56]  B. Polzin,et al.  Functioning Mechanism of AlF3 Coating on the Li- and Mn-Rich Cathode Materials , 2014 .

[57]  P. Novák,et al.  Structural Changes and Microstrain Generated on LiNi0.80Co0.15Al0.05O2 during Cycling: Effects on the Electrochemical Performance , 2015 .

[58]  I. Ial,et al.  Nature Communications , 2010, Nature Cell Biology.

[59]  J. Colin,et al.  First evidence of manganese-nickel segregation and densification upon cycling in Li-rich layered oxides for lithium batteries. , 2013, Nano letters.

[60]  Young-Il Jang,et al.  TEM Study of Electrochemical Cycling‐Induced Damage and Disorder in LiCoO2 Cathodes for Rechargeable Lithium Batteries , 1999 .