A monolithic stereolithography 3-D printed Ka-band spherical resonator bandpass filter

This paper presents a monolithic integration of a Ka-band fourth-order spherical resonator bandpass filter that is fabricated with a ceramic-filled resin using a stereo-lithography-based 3-D printing technique. The filter is designed with a quadruplet coupling topology to improve its out-of-band rejection, and is printed as a single structure instead of multiple parts, without the need of post-fabrication assembly. Surface metallization of the printed resin model is achieved by employing electroless nickel/copper plating. The demonstrated filter prototype exhibits in its passband from 33.9 to 35.7 GHz an insertion loss of 1.7–3.1 dB, a return loss mostly greater than 16 dB, and a center frequency shift of 0.57%.

[1]  Xun Gong,et al.  Layer-by-layer polymer stereolithography fabrication for three-dimensional RF components , 2004, 2004 IEEE MTT-S International Microwave Symposium Digest (IEEE Cat. No.04CH37535).

[2]  Cheng Guo,et al.  Compact high-Q hemispherical resonators for 3-D printed bandpass filter applications , 2017, 2017 IEEE MTT-S International Microwave Symposium (IMS).

[3]  Cheng Guo,et al.  Ceramic filled resin based 3D printed X-band dual-mode bandpass filter with enhanced thermal handling capability , 2016 .

[4]  Paul Booth,et al.  Enhancing the Performance of Waveguide Filters Using Additive Manufacturing , 2017, Proceedings of the IEEE.

[5]  Nick M. Ridler,et al.  3-D Printed Metal-Pipe Rectangular Waveguides , 2015, IEEE Transactions on Components, Packaging and Manufacturing Technology.

[6]  Tomislav Debogovic,et al.  Polymer-Based Additive Manufacturing of High-Performance Waveguide and Antenna Components , 2017, Proceedings of the IEEE.

[7]  Cheng Guo,et al.  $W$ -Band Waveguide Filters Fabricated by Laser Micromachining and 3-D Printing , 2016, IEEE Transactions on Microwave Theory and Techniques.

[8]  Cheng Guo,et al.  3D printed bandpass filters using compact high-Q hemispherical resonators with improved out-of-band rejection , 2017 .

[9]  Guo.  A 3-D Printed Lightweight X-Band Waveguide Filter Based on Spherical Resonators , 2015 .

[10]  Fan Zhang,et al.  A Lightweight 3-D Printed $X$-Band Bandpass Filter Based on Spherical Dual-Mode Resonators , 2016, IEEE Microwave and Wireless Components Letters.