Mathematical modeling of injectivity damage with oil droplets in the waste produced water re-injection of the linear flow

[1]  M. Jordan.  Management of Scale Control in Produced Water Reinjection - The Near Wellbore Scale Challenge Overcome , 2018, Day 2 Thu, June 21, 2018.

[2]  B. Segues,et al.  Improving Produced Water Quality Discharge into the Sea by Using Hungry Bacteria , 2018 .

[3]  T. Morrow,et al.  Assessment of Produced Water Reinjection in a Giant Carbonate Reservoir , 2017 .

[4]  K. Fischer,et al.  Integrated Modeling of Formation Damage and Multiple Induced Hydraulic Fractures During Produced Water Reinjection , 2017 .

[5]  A. Wojtanowicz,et al.  Minimum Produced Water from Oil Wells with Water-Coning Control and Water-Loop Installations , 2011 .

[6]  John A. Veil,et al.  Produced water volumes and management practices in the United States. , 2009 .

[7]  L. Nabzar,et al.  Emulsion Deposition in Porous Media: Impact on Well Injectivity , 2008 .

[8]  J. Ochi,et al.  Internal formation damage properties and oil deposition profile , 2007 .

[9]  Gary Wang,et al.  Produced Water Management Strategy Water-Injection Best Practices - Design, Performance, Monitoring , 2005 .

[10]  F. Civan.  Reservoir Formation Damage, Fundamentals, Modeling, Assessment, and Mitigation , 2000 .

[11]  Jalel Ochi,et al.  External Filter Cake Properties During Injection of Produced Waters , 1999 .

[12]  Henry A. Ohen,et al.  A Systematic Laboratory Core and Fluid Analysis Program for the Design of a Cost Effective Treatment and Cleanup Guidelines for a Produced Water Disposal Scheme , 1996 .

[13]  M. Renard,et al.  Mechanisms of Formation Damage by Retention of Particles Suspended in Injection Water , 1995 .

[14]  J. Somerville,et al.  An Experimental Investigation of the Formation Damage Caused by Produced Oily Water Injection , 1993 .