Understanding the effect of superhydrophobic coatings on energy reduction in anti-icing systems

Abstract In the development of anti/de-icing systems for aeronautics, wind turbines or telecommunication antennas to date, less attention is paid to coating strategies. The majority of studies dealing with coatings have focused mainly on reducing ice adhesion forces, to easily remove ice, once it has formed. In this study we focused on an alternative strategy that consists of promoting the shedding of liquid water as a way to reduce the total amount of water present on the surface that can freeze. Shedding of liquid from the surface can be enhanced by modification of surface wettability, by means of the application of superhydrophobic coatings, i.e. water repellent coatings, characterized by low water adhesion forces. To study the effect of superhydrophobic coatings on surfaces exposed to icing conditions, tests were performed in an open loop icing wind tunnel (IWT) on a standard NACA0021 airfoil in two different icing conditions. Three samples were used during the tests, each one is characterized by different wettability properties. To simulate the presence on anti/de-icing system, the wing was also equipped with an electrical heater, mounted at the inner side of the wing leading edge. Results from IWT tests demonstrated that surface wettability is an important controlling factor not only for reducing ice accretion on the wing, but also for reducing by up to 80% the energy required to avoid ice accretion on the wing. The findings from IWT tests as described, together with results from a previous work on drop shedding, reinforced the hypothesis that shedding of drops is the key controlling mechanism for an efficient icing mitigation strategy.

[1]  A. Cassie,et al.  Wettability of porous surfaces , 1944 .

[2]  Erik S. Weiser,et al.  Evaluation of ice release coatings at cryogenic temperature for the space shuttle , 2008 .

[3]  Kazuhito Hashimoto,et al.  Recent Studies on Super-Hydrophobic Films , 2001 .

[4]  M. Farzaneh,et al.  Elaboration of Al2O3/PTFE icephobic coatings for protecting aluminum surfaces , 2009 .

[5]  A Amirfazli,et al.  Drop shedding by shear flow for hydrophilic to superhydrophobic surfaces. , 2009, Langmuir : the ACS journal of surfaces and colloids.

[6]  D. L. Loughborough,et al.  Reduction of the Adhesion of Ice to De-Icer Surfaces , 1946 .

[7]  R. N. Wenzel.  RESISTANCE OF SOLID SURFACES TO WETTING BY WATER , 1936 .

[8]  Howard A. Porte,et al.  COATING MATERIAL FOR PREVENTION OF ICE AND SNOW ACCUMULATIONS - A LITERATURE SURVEY, , 1963 .

[9]  F. J. Carmona,et al.  General methodology for evaluating the adhesion force of drops and bubbles on solid surfaces. , 2009, Langmuir : the ACS journal of surfaces and colloids.

[10]  T. Young.  III. An essay on the cohesion of fluids , 1805, Philosophical Transactions of the Royal Society of London.

[11]  Alidad Amirfazli,et al.  Understanding of sliding and contact angle results in tilted plate experiments , 2008 .

[12]  David Quéré,et al.  Non-sticking drops , 2005 .

[13]  R. Carriveau,et al.  A review of surface engineering issues critical to wind turbine performance , 2009 .

[14]  Shigeo Kimura,et al.  A New Surface Coating for Prevention of Icing on Airfoils , 2007 .

[15]  David N. Anderson,et al.  Tests of the Performance of Coatings for Low Ice Adhesion , 1997 .

[16]  John F. Maissan.  Wind Power Development in Sub-Arctic Conditions With Severe Rime Icing , 2002 .

[17]  Y. Boluk,et al.  ADHESION OF FREEZING PRECIPITATES TO AIRCRAFT SURFACES , 1996 .

[18]  Jean Laflamme,et al.  State-of-the-art on power line de-icing , 1998 .