3D printing of ductile equiatomic Fe-Co alloy for soft magnetic applications

[1]  U. Ramamurty,et al.  Selective laser melting of Fe–Al alloys with simultaneous gradients in composition and microstructure , 2021, Materials Science and Engineering: A.

[2]  U. Ramamurty,et al.  Hydrogen uptake and its influence in selective laser melted austenitic stainless steel: A nanoindentation study , 2021 .

[3]  J. C. Teixeira,et al.  Investigation of the build orientation effect on magnetic properties and Barkhausen Noise of additively manufactured maraging steel 300 , 2021 .

[4]  A. Jardini,et al.  Investigation of Building Orientation and Aging on Strength–Stiffness Performance of Additively Manufactured Maraging Steel , 2021, Journal of Materials Engineering and Performance.

[5]  Gabriel Meric de Bellefon,et al.  Origin of dislocation structures in an additively manufactured austenitic stainless steel 316L , 2020 .

[6]  U. Ramamurty,et al.  High cycle fatigue in selective laser melted Ti-6Al-4V , 2020 .

[7]  A. Kustas,et al.  An additive manufacturing design approach to achieving high strength and ductility in traditionally brittle alloys via laser powder bed fusion , 2020 .

[8]  H. Jing,et al.  Effects of annealing on the structure and mechanical properties of FeCoCrNi high-entropy alloy fabricated via selective laser melting , 2020 .

[9]  J. Rodelas,et al.  Achieving high strength and ductility in traditionally brittle soft magnetic intermetallics via additive manufacturing , 2019, Acta Materialia.

[10]  Joseph William Newkirk,et al.  Grain Size Effects in Selective Laser Melted Fe-Co-2V , 2019, Applied Sciences.

[11]  S. Gorsse,et al.  Selective Laser Melting of Al0.3CoCrFeNi High-Entropy Alloy: Printability, Microstructure, and Mechanical Properties , 2019, JOM.

[12]  A. Kustas,et al.  Controlling the extent of atomic ordering in intermetallic alloys through additive manufacturing , 2019, Additive Manufacturing.

[13]  Tomi Lindroos,et al.  Properties of soft magnetic Fe-Co-V alloy produced by laser powder bed fusion , 2019, Rapid Prototyping Journal.

[14]  T. Monson,et al.  Soft magnetic materials for a sustainable and electrified world , 2018, Science.

[15]  O. Prakash,et al.  Micro-and meso-structures and their influence on mechanical properties of selectively laser melted Ti-6Al-4V , 2018, Acta Materialia.

[16]  Mark A. Rodriguez,et al.  Characterization of the Fe-Co-1.5V soft ferromagnetic alloy processed by Laser Engineered Net Shaping (LENS) , 2018 .

[17]  J. S. Zuback,et al.  Additive manufacturing of metallic components – Process, structure and properties , 2018 .

[18]  Qingqing Ding,et al.  Dislocation network in additive manufactured steel breaks strength–ductility trade-off , 2017 .

[19]  B. Hu,et al.  High dislocation density–induced large ductility in deformed and partitioned steels , 2017, Science.

[20]  Albert C. To,et al.  Quantitative texture prediction of epitaxial columnar grains in additive manufacturing using selective laser melting , 2017 .

[21]  I. Yermolenko,et al.  Composition, Morphology, and Topography of Galvanic Coatings Fe-Co-W and Fe-Co-Mo , 2017, Nanoscale Research Letters.

[22]  C. Yuan,et al.  Selective Abnormal Growth Behavior of Goss Grains in Magnetostrictive Fe-Ga Alloy Sheets , 2016 .

[23]  M. Ferry,et al.  Composition dependence of the microstructure and soft magnetic properties of Fe-based amorphous/nanocrystalline alloys: A review study , 2014 .

[24]  Kyung-Tae Park,et al.  Tensile deformation of a low density Fe–27Mn–12Al–0.8C duplex steel in association with ordered phases at ambient temperature , 2013 .

[25]  T. Baudin,et al.  Effect of recrystallization and degree of order on the magnetic and mechanical properties of soft magnetic FeCo–2V alloy , 2013 .

[26]  Muratahan Aykol,et al.  Effect of vanadium on atomic ordering characteristics and anti-phase boundary energies of B2–FeCo alloys , 2010 .

[27]  F. J. Humphreys,et al.  Abnormal grain growth in Al–3.5Cu , 2009 .

[28]  D. Dimiduk,et al.  Dislocation structures and their relationship to strength in deformed nickel microcrystals , 2008 .

[29]  H. Shokrollahi,et al.  Soft magnetic composite materials (SMCs) , 2007 .

[30]  Thomas Sourmail,et al.  Near equiatomic FeCo alloys: Constitution, mechanical and magnetic properties , 2005 .

[31]  Seetharama C. Deevi,et al.  Soft magnetic FeCo alloys: alloy development, processing, and properties , 2005 .

[32]  J. I. Lee,et al.  Electronic and Magnetic Properties of Ultrathin Fe−Co Alloy Nanowires , 2005 .

[33]  T. Sourmail.  Evolution of strength and coercivity during annealing of FeCo based alloys , 2004 .

[34]  D. Z. Zhang,et al.  Temperature dependent mechanical properties of ultra-fine grained FeCo–2V , 2003 .

[35]  I. Shabanova,et al.  Phase Transformations in the Fe-Co System , 2002 .

[36]  E. George,et al.  Mechanical properties of soft magnetic FeCo alloys , 2002 .

[37]  K. Ishida,et al.  Phase equilibria in the Fe-Co binary system , 2002 .

[38]  I. Baker.  A review of the mechanical properties of B2 compounds , 1995 .

[39]  I. Baker,et al.  The effect of grain size and Fe:Co ratio on the room temperature yielding of FeCo , 1994 .

[40]  R. Rawlings,et al.  Effect of niobium additions on the structure and magnetic properties of equiatomic iron-cobalt alloys , 1991 .

[41]  R. Rawlings,et al.  Effects on some physical properties of soft magnetic Fe-Co alloys due to the replacement of vanadium by niobium , 1990 .

[42]  M. Mendiratta,et al.  Slip Directions in B2 Fe-Al Alloys , 1984 .

[43]  K. Kawahara.  Structures and mechanical properties of an FeCo-2V alloy , 1983 .

[44]  K. Kawahara.  Effect of additive elements on cold workability in FeCo alloys , 1983 .

[45]  K. Schwarz,et al.  Band theory for the magnetic moment in the bcc Fe-Co alloy , 1982 .

[46]  R. Buckley.  Ordering and recrystallization in Fe-50Co-0.4%Cr , 1979 .

[47]  R. Kikuchi,et al.  Kinetics of order-disorder transformations in alloys , 1976 .

[48]  K. Sadananda,et al.  Effect of strain, temperature, and atomic order on slip deformation in FeCo , 1974, Metallurgical and Materials Transactions B.

[49]  J. Eymery,et al.  Ordering kinetics of various FeCo alloys , 1974 .

[50]  D. Bardos.  Mean Magnetic Moments in bcc Fe–Co Alloys , 1969 .

[51]  Ting Zhu,et al.  Additively manufactured hierarchical stainless steels with high strength and ductility. , 2018, Nature materials.

[52]  B. Johansson,et al.  Calculated magnetic properties of binary alloys between Fe, Co, Ni, and Cu , 1999 .

[53]  M. Rajković,et al.  Ordering transformations in Fe-50Co based alloys , 1981 .

[54]  R. Buckley.  Microstructure and Kinetics of the Ordering Transformation in Iron–Cobalt Alloys, FeCo, FeCo–0.4%Cr, FeCo–2.5%V , 1975 .

[55]  D. W. Clegg,et al.  The Disorder → Order Transformation in Iron–Cobalt-Based Alloys , 1973 .