Fast response resistive humidity sensitivity of polyimide/multiwall carbon nanotube composite films

Abstract In this study, the fast response resistive humidity sensing properties of polyimide/multiwall carbon nanotube (PI/MWNT) composite films were demonstrated. A composite film with a loading of 3 wt% MWNTs possesses a very linear response nature, a linearity correlation (R2) of 0.99157 and a sensitivity of 0.00146/%RH. The response time was less than 5 s and the resistance changed synchronously with different humidities. The recoverable and repeatable resistive responses affirmed the high efficiency of this film for fast humidity detection. A negative temperature effect was found and proper temperature compensation should be considered in the future applications. Moreover, the humidity sensing properties were presented as a bulk effect owing to water penetration. The stability of the films was proven, which further confirmed that the films could be used as reliable sensor materials. The surfaces of the films were found as an organized structure with nano-size dimples, which is helpful for absorption of water molecules. The proposed sensing mechanisms are related with tunnel effects, doping of MWNTs by water and a barrier effect between MWNTs.

[1]  M. Matsuguchi,et al.  Stability and reliability of capacitive-type relative humidity sensors using crosslinked polyimide films , 1998 .

[2]  Jijun Zhao,et al.  Gas molecule adsorption in carbon nanotubes and nanotube bundles , 2002 .

[3]  Antonella Macagnano,et al.  Design and optimization of an ultra thin flexible capacitive humidity sensor , 2009 .

[4]  Jin Ho Kang,et al.  Actuating Single Wall Carbon Nanotube–Polymer Composites: Intrinsic Unimorphs , 2008 .

[5]  Litao Liu,et al.  Humidity Sensitivity of Multi-Walled Carbon Nanotube Networks Deposited by Dielectrophoresis , 2009, Sensors.

[6]  J. Nevin,et al.  A polyimide-based capacitive humidity sensor , 1985, IEEE Transactions on Electron Devices.

[7]  M. Ueda,et al.  A New Negative-Type Photosensitive Polyimide Based on Poly(hydroxyimide), a Cross-Linker, and a Photoacid Generator , 1996 .

[8]  Ephraim Suhir,et al.  Moisture Diffusion in Epoxy Molding Compounds Filled With Particles , 2001 .

[9]  T. Fukushima,et al.  New concept of positive photosensitive polyimide: Reaction development patterning (RDP) , 2001 .

[11]  J. Bartrolí,et al.  Strategies for the optimization of carbon nanotube/polymer ratio in composite materials: Applications as voltammetric sensors , 2010 .

[12]  D. Thouless.  Percolation Theory and Electrical Conductivity , 1971 .

[13]  R. Mathur,et al.  Influence of Surface Modified MWCNTs on the Mechanical, Electrical and Thermal Properties of Polyimide Nanocomposites , 2008, Nanoscale Research Letters.

[14]  C. Gau,et al.  Piezoresistive characteristics of MWNT nanocomposites and fabrication as a polymer pressure sensor. , 2009, Nanotechnology.

[15]  P. Su,et al.  In situ synthesized composite thin films of MWCNTs/PMMA doped with KOH as a resistive humidity sensor , 2007 .

[16]  Craig A. Grimes,et al.  Gas sensing characteristics of multi-wall carbon nanotubes , 2001 .

[17]  Kazuyuki Horie,et al.  Photophysics, photochemistry, and optical properties of polyimides , 2001 .

[18]  Muthukumaran Packirisamy,et al.  A polyimide based resistive humidity sensor , 2005 .

[19]  Yoshiro Sakai,et al.  A thin-film polysulfone-based capacitive-type relative-humidity sensor , 1993 .

[20]  Nam Ki Min,et al.  Novel resistive-type humidity sensor based on multiwall carbon nanotube/polyimide composite films , 2010 .

[21]  Erdan Gu,et al.  Layer-by-Layer assembly and humidity sensitive behavior of poly(ethyleneimine)/multiwall carbon nanotube composite films , 2006 .

[22]  A. Rinzler,et al.  Electronic structure of atomically resolved carbon nanotubes , 1998, Nature.

[23]  M. Meyyappan,et al.  Carbon Nanotube Sensors for Gas and Organic Vapor Detection , 2003 .

[24]  Mangilal Agarwal,et al.  Polymer-based microsensor for soil moisture measurement , 2008 .

[25]  Claude Pellet,et al.  Fast response Humidity Sensors for a Medical Microsystem , 2003 .

[26]  Zhaoying Zhou,et al.  Humidity Sensitivity of Carbon Nanotube and Poly (Dimethyldiallylammonium Chloride) Composite Films , 2009, IEEE Sensors Journal.

[27]  P. Poncharal,et al.  Water-vapor effect on the electrical conductivity of a single-walled carbon nanotube mat , 2000 .

[28]  Yang Li,et al.  n-Type gas sensing characteristics of chemically modified multi-walled carbon nanotubes and PMMA composite , 2007 .

[29]  Vijay K. Varadan,et al.  Carbon nanotube/PMMA composite thin films for gas-sensing applications , 2003 .

[30]  Chen Wei,et al.  Multifunctional chemical vapor sensors of aligned carbon nanotube and polymer composites. , 2006, Journal of the American Chemical Society.

[31]  Khalil Najafi,et al.  A high-sensitivity polyimide capacitive relative humidity sensor for monitoring anodically bonded hermetic micropackages , 2001 .

[32]  J. Galloway,et al.  Moisture absorption and desorption predictions for plastic ball grid array packages , 1996 .

[33]  K. Watson,et al.  Dispersion of single wall carbon nanotubes by in situ polymerization under sonication , 2002 .

[34]  Sung-Min Hong,et al.  High sensitivity capacitive humidity sensor with a novel polyimide design fabricated by MEMS technology , 2009, 2009 4th IEEE International Conference on Nano/Micro Engineered and Molecular Systems.

[35]  Cheng‐Chien Wang,et al.  Characteristics of polyimide-based nanocomposites containing plasma-modified multi-walled carbon nanotubes , 2008 .

[36]  Y. C. Chan,et al.  Surfactant-assisted processing of polyimide/multiwall carbon nanotube nanocomposites for microelectronics applications , 2010 .

[37]  Jean-Yves Delétage,et al.  Humidity sensors for a pulmonary function diagnostic microsystem , 2001 .

[38]  I. Kinloch,et al.  Ultra-low electrical percolation threshold in carbon-nanotube-epoxy composites , 2003 .

[39]  J. Kang,et al.  Piezoresistive characteristics of single wall carbon nanotube/polyimide nanocomposites , 2009 .

[40]  Wei Fen Jiang,et al.  Resistive humidity sensitivity of arrayed multi-wall carbon nanotube nests grown on arrayed nanoporous silicon pillars , 2007 .

[41]  C. S. Bhatia,et al.  The effect of length of single-walled carbon nanotubes (SWNTs) on electrical properties of conducting polymer–SWNT composites , 2009 .