Including air-exchange performance in building regulation
暂无分享,去创建一个
Research shows that, despite compliance with building codes, residential ventilation systems do not deliver the
requested air exchanges in the individual rooms. One of the reasons for this can be found in the way the building
codes are composed. In general building codes only specify the minimum ventilation capacity that need to be
installed in the various rooms. The actual performance of the ventilation system is left to the market. Since
reality shows that market forces alone do not succeed in securing minimal ventilation performance, the Dutch
Standards Committee – when commissioning the revision of the existing standard NEN 1087 (Ventilation for
Buildings) – requested that a Performance Assessment method should be incorporated in the new version, in
order to guide the market towards better ventilation systems.
Obviously good IAQ is the actual goal behind ventilation systems. Ventilation systems attempt to influence the
IAQ by inducing air exchanges in the various rooms in order to extract and dilute pollutant concentrations. Since
type and level of pollutant concentrations is an ongoing research topic and in addition highly dependent on
pollutant level of the building itself, the draft Performance Assessment method will not be based on IAQ-metrics
(pollutants), but on the primary function the ventilation system itself: ‘its ability to achieve the requested air
exchanges in the right place at the right time’. The rapporteurs therefore proposed to follow the methodology
that was developed by VHK and U-Gent in consultation with the Residential Working Group of EVIA. The
principles of this methodology were presented during the 2017 AIVC conference. The methodology introduces
new parameters that indicate the probability of ‘achieving the requested air exchanges in the right place at the
right time’, based on the controls that are used, the operating reliability of the ventilation provisions used, and
the airtightness of the building.
Adjustments were necessary to make the methodology suitable for use in building regulations. The coming
period will be used to compare results of the Performance Assessment method with the results of field research
and multi-zone airflow simulation models, after which the new NEN 1087 and the Performance Assessment
method will be published for public consultation.