Measurement-Based Vehicle Load Model for Urban Expressway Bridges

Significant changes in vehicle loads have occurred in China due to the development of the automobile industry and transportation within the past two decades, particularly the rapid increase in traffic flow and the large-scale emergence of heavy trucks. However, research into vehicle loadings on urban bridges is not well developed. In this study, based on traffic flow data collected using a weigh-in-motion system installed on an expressway in an urban logistics zone, we analyzed the traffic flow, vehicle types, and gross vehicle weight (GVW) features and developed models for the vehicle load and fatigue load. According to the axle space, axle types, and axle number, the trucks in the traffic flow were classified into 10 representative vehicle types. The probability distribution of the GVW was fitted to a three-class mixed log-normal distribution. Using the improved Gumbel method, we determined the extreme value distribution of the vehicle loadings in the purpose reference period and assessed the vehicle loadings of urban bridges. In addition, using the equivalent damage theory, six equivalent vehicle models were established according to the measurements of the axle weight and axle space, thereby obtaining a simplified model of fatigue vehicle loadings on urban expressway bridges.

[1]  L G Tham BSc PhD Masce,et al.  Design Thermal Loading for Steel Bridges in Hong Kong , 2013 .

[2]  Tong Guo,et al.  Probabilistic Assessment of Deteriorating Prestressed Concrete Box-Girder Bridges under Increased Vehicle Loads and Aggressive Environment , 2011 .

[3]  Eugene J. O'Brien,et al.  Monte Carlo simulation of extreme traffic loading on short and medium span bridges , 2013 .

[4]  Gongkang Fu,et al.  Truck Loads and Bridge Capacity Evaluation in China , 2009 .

[5]  Xiao-Yi Zhou,et al.  Statistical analysis of traffic loads and their effects on bridges , 2013 .

[6]  G Fu,et al.  Extreme truck load effect prediction for bridge structural reliability , 2010 .

[7]  Andrzej S. Nowak,et al.  Design live load for long span bridges , 2010 .

[8]  Gang Mei,et al.  Bimodal renewal processes models of highway vehicle loads , 2004, Reliab. Eng. Syst. Saf..

[9]  Chengming Lan,et al.  Traffic load modelling based on structural health monitoring data , 2011 .

[10]  Colin C. Caprani,et al.  Probalistic analysis of highway bridge traffic loading , 2005 .

[11]  Eugene J. O'Brien,et al.  Estimating extreme highway bridge traffic load effects , 2010 .

[12]  Yi-Qing Ni,et al.  Reliability-based condition assessment of in-service bridges using mixture distribution models , 2012 .

[13]  Eugene J. O'Brien,et al.  Simplified site-specific traffic load models for bridge assessment , 2007 .

[14]  Guang-Dong Zhou,et al.  Thermal Load in Large-Scale Bridges: A State-of-the-Art Review , 2013, Int. J. Distributed Sens. Networks.

[15]  S. Rahman.  Reliability Engineering and System Safety , 2011 .

[16]  Ming Gu,et al.  Wavelet based multi-step filtering method for bridge healthmonitoring using GPS and accelerometer , 2013 .

[17]  Ting-Hua Yi,et al.  Experimental assessment of high-rate GPS receivers for deformation monitoring of bridge , 2013 .

[18]  Juan R. Casas,et al.  A comprehensive traffic load model for bridge safety checking , 1997 .

[19]  Jason Dowling,et al.  Characteristic dynamic traffic load effects in bridges , 2009 .

[20]  Tommy H.T. Chan,et al.  Bridge live load models from WIM data , 2002 .

[21]  Tommy H.T. Chan,et al.  Statistical models from weigh-in-motion data , 2005 .

[22]  Feng Min.  Research on Probabilistic Model of Highway Bridge Vehicle Loads(1)——Non-controlling Area , 2010 .

[23]  Gongkang Fu,et al.  Extrapolation for Future Maximum Load Statistics , 2011 .

[24]  Bala Sivakumar,et al.  State-Specific LRFR Live Load Factors Using Weigh-in-Motion Data , 2008 .

[25]  Guo Ji,et al.  Extreme Value Extrapolation for Bridge Vehichle Load Effect Based on Synthetic Vehicle Flow , 2012 .

[26]  Colin Christopher Caprani,et al.  The use of predictive likelihood to estimate the distribution of extreme bridge traffic load effect , 2010 .

[27]  Andrzej S. Nowak,et al.  Live load models based on weigh-in-motion data , 2010 .