Packaging effects on a CMOS low-noise amplifier: Flip-chip versus wirebond

A model-based study is presented to compare the effects between flip-chip and wirebond package on a low-noise amplifier (LNA) in a 2.4 GHz CMOS wireless local area network (WLAN) receiver. To construct the package electrical models, specific modeling dies are designed to help extract the equivalent-circuit parameters from measured S-parameters for chip-package interconnects. Furthermore, the ground proximity effects on on-chip spiral inductors in a flip-chip package are also modeled in this study. Excellent agreement between modeling and measurement is obtained up to 20 GHz for a 64-pin flip-chip ball grid array (FCBGA) package and a 64-pin wirebond quad flat nonlead (QFN) package. In practical applications, the established package models are used to predict the RF specifications of a 2.4 GHz CMOS LNA when packaged in the above two packages. Consequently, chip-package co-simulation achieves a good agreement with measurement, and thus can persuasively account for the effects caused by the two different packages.

[1]  T.S. Horng,et al.  Modeling of lead-frame plastic CSPs for accurate prediction of their low-pass filter effects on RFICs , 2001, 2001 IEEE Radio Frequency Integrated Circuits (RFIC) Symposium (IEEE Cat. No.01CH37173).

[2]  Tzyy-Sheng Horng,et al.  A Rigorous Study of Package and PCB Effects on W-CDMA Upconverter RFICs , 2006, IEEE Transactions on Microwave Theory and Techniques.

[3]  A. Parssinen,et al.  Analysis and optimization of packaged inductively degenerated common-source low-noise amplifiers with ESD protection , 2005, IEEE Transactions on Microwave Theory and Techniques.

[4]  U.R. Pfeiffer,et al.  Characterization of flip-chip interconnects up to millimeter-wave frequencies based on a nondestructive in situ approach , 2005, IEEE Transactions on Advanced Packaging.

[5]  C. Yue,et al.  On-chip Spiral Inductors With Patterned Ground Shields For Si-based RF IC's , 1997, Symposium 1997 on VLSI Circuits.

[6]  P. Sivonen,et al.  Analysis of packaging effects and optimization in inductively degenerated common-emitter low-noise amplifiers , 2003 .

[7]  R. W. Jackson,et al.  Modeling millimeter-wave IC behavior for flipped-chip mounting schemes , 1997 .

[8]  J. Burghartz,et al.  On the design of RF spiral inductors on silicon , 2003 .

[9]  T.S. Horng,et al.  A rigorous study of package and PCB effects on W-CDMA RFICs , 2005, 2005 Asia-Pacific Microwave Conference Proceedings.

[10]  Tzyy-Sheng Horng,et al.  Direct-conversion quadrature modulator MMIC design with a new 90/spl deg/ phase shifter including package and PCB effects for W-CDMA applications , 2006, IEEE Transactions on Microwave Theory and Techniques.

[11]  Ruey-Beei Wu,et al.  Modeling and design for electrical performance of wideband flip-chip transition , 2003 .

[12]  U. Pfeiffer,et al.  Equivalent circuit model extraction of flip-chip ball interconnects based on direct probing techniques , 2005, IEEE Microwave and Wireless Components Letters.

[13]  Hussein Hamed Mahmoud Ghouz,et al.  An accurate equivalent circuit model of flip chip and via interconnects , 1996 .